Crafts from chestnuts with your own hands: master classes. Do-it-yourself chestnut topiary: master class, crafts from nuts and acorns, how to make autumn topiary, photo, video instruction Chestnut tree

We invite you to collect with your child during autumn walks a large number of chestnuts and acorns, which can be used to make various stylish compositions for interior decoration. As a base (crown) for such a tree, you can use ready-made foam / plastic balls or crumple it from a newspaper and tie it with threads.

To make a chestnut tree, you will need:

Dried chestnuts and acorns;

Corrugated paper / colored napkins;

Newspaper + tape / thread (for the base);

A thick and durable stick (since the crown of chestnuts can turn out to be very heavy);

PVA glue;

Thermal gun.

chestnut tree step by step

First, make the basis for the future crown, for which take a newspaper, form a ball out of it at the end of the stick, tamp the ball from all sides and glue it with tape or wrap it with thread. Using the same adhesive tape, fix it on a stick-trunk (also, instead of sticking it with adhesive tape, you can wrap the newspaper with a simple package and tie it tightly to the stick).

After making the base - start gluing chestnuts from the bottom of the ball in rows and move to the top. Fasten the chestnuts with glue gun- do not spare the glue, so that later nothing falls off.

After the entire ball is covered with chestnuts, you need to glue the largest voids between them with acorns (if desired) also with hot glue (if there are no acorns, but go straight to the next step). All other gaps must be filled with pieces of a crumpled colored napkin, which is more convenient to glue on PVA glue (it is the most liquid and it is easier to glue napkins on it, and after drying it becomes transparent and will not be noticeable).

From napkins of other colors, you can make several flowers and decorate the crown with them at the end of the workflow. Leave the finished tree to dry for a while, and then pick up a suitable flower pot for it.

Do-it-yourself chestnut tree is ready!

Autumn is the time of the year, which presents us with a lot of materials for creativity. Many adults and children are happy to collect cones, bright leaves, dry flowers to create original products with your own hands. IN Lately crafts made from the fruits of the chestnut tree became quite popular. Chestnut can serve as the basis for many creative ideas.

Chestnut topiary

One of the most interesting chestnut products is the topiary. To make a unique tree with your own hands, you will certainly need a ball for the base, a trunk, a container in the form of a pot, or some kind of stand. Fruits can be painted in the desired shade or used in its natural form. For crafts, you may also need twine, beautiful braid, beads, and much more. It all depends on the capabilities and imagination of the author.

1. The first step is to prepare the base. First you need to think about the base ball. You can use a ready-made blank, which is purchased at a needlework store at an affordable price. Or you can make a ball from improvised materials:

• papier mache;
• wrap a dense bundle of newspapers with threads;
• use an old rubber ball or any round object.

2. Selection of the trunk. Any wand can be used here. A pencil, a branch, a small rail will do.

3. The connection of the base and the trunk. To do this, you need to make a neat cut at the base with a clerical knife and place the barrel in it.

4. Work with a potty. Most often, craftsmen use a small vase or an ordinary flower pot. You can choose the capacity appearance in advance, or you can decorate it yourself.

5. Gypsum mortar is poured into the pot. When it starts to harden a little, you need to insert the barrel together with the ball into the mass and wait for the gypsum to dry completely.

6. The next step is to decorate our crafts.

Gluing chestnuts is one of the most interesting and exciting stages. It is better to choose for this not round fruits, but slightly flattened ones. Hot glue is best for gluing. It will allow you to quickly fix the decor on the base. It is recommended to start from the top.

When gluing fruits, rarely anyone manages to avoid emptiness. Now is the time to think about how to cover it up. For the final decor, both the base and the planter are perfect:

• pistachio shells;
• small slices of dried citrus;
• coins;
• decorative braid or ribbons;
• beads;
• cereals or pasta of an interesting shape;
• coffee beans.

In order for the chestnut craft to be done neatly and in an original way, you should pay attention to a number of tips:

1. Chestnuts in mixed decor look interesting. For example, some of the fruits are left in their natural form or simply varnished. And others are wrapped, for example, with twine.
2. Separately, you can use hats from chestnuts.
3. Both the hats and the fruits themselves can be painted with spray paint. It is better to give preference to gold, silver, bronze shades.

Christmas tree from chestnuts

On the eve of the New Year, you can create an original Christmas tree from chestnuts with your own hands.

This will require the following materials:

• chestnuts different sizes;
• thick cardboard;
• hot glue;
• paints in spray cans;
• decoration material.

First, the basis for the New Year's beauty is made. To do this, a cone is made of thick cardboard, depending on the required height of the finished craft.

Before proceeding to the most important process, chestnuts need to be sorted by size. You need to start work with the largest fruits.

Using hot glue, chestnuts are attached to the cone made, starting from the bottom border. Toward the top, the size of the fruit should decrease.

Now it's time to paint the product. Spray paint works best. Color can be any, it all depends on the imagination.

After the Christmas tree has dried out, it's time to decorate it, for this you can use:

• tinsel;
• beads;
• homemade bows;
• tapes;
• small Christmas toys.

Decorative vase of chestnuts

To create an original vase decorated with chestnuts, you will need:

• base for a vase;
• fruits of a chestnut tree;
• hot glue;
• dye;
• decoration materials.

First you need to prepare the base for the vase. As a basis, you can use finished vase or make it from improvised materials, for example, from cardboard or take some kind of jar. The disadvantage of a cardboard product will be the inability to use it for fresh flowers.

To make possible gaps between the chestnuts not so conspicuous, you can paint the vase with brown paint and let it dry.

Fruits are attached to the chosen basis of our chestnut craft using hot glue and a gun.

When designing a product, it is first of all better to close the “emptiness”.

For decorating chestnut vases fit:

• dry flowers;
• coffee beans;
• beads;
• ribbons.

House of chestnuts

Children enjoy making crafts natural materials and especially they like chestnuts. Doing crafts for school or kindergarten, it is quite possible to create a composition with a chestnut house.

It will require:

• chestnuts;
• bright leaves autumn trees;
• dry branches of small sizes;
• legumes, such as beans;
• dried rowan berries;
• plasticine;
• hot glue.

Now consider the sequence of work:

1. We select the basis for crafts from chestnuts. It can be a box or just thick cardboard.
2. A small corner is covered with carefully mashed plasticine. But the rest of the "territory" is laid out with dried leaves. They can be fixed with glue from a gun.
3. A large flat oval is made from blue or blue plasticine - this will be a lake. finished part spread on the "plasticine" area.
4. Around the reservoir, you can lay out a fence of some seeds.
5. We select the basis for the house. It is best to use a ready-made box, make a cardboard roof.
6. We cover the base with chestnuts. They can be attached to plasticine, but it will be more reliable to use hot glue.
7. Places for windows can be left in advance by making them from plasticine yellow color. Or glue them on top of paper or cardboard. With plasticine windows, the house will look more comfortable.
8. From the branches you can make a pipe.
9. Now the product can be varnished.
10. The clearing around the house can be decorated at your discretion, depending on availability various materials. Next, we will consider how to make mushrooms and various animals from chestnuts. They can be placed in the clearing around the house.

chestnut mushrooms

To make mushrooms from chestnut fruits, you will need:

• plasticine;
• chestnuts;
• acorns;
• natural materials for decoration.

So, let's start making mushrooms:

1. For the base, you need to make a small clearing of plasticine. To do this, a small "cake" of green color is made.
2. An acorn is attached to the clearing - this will be the leg for the mushroom.
3. The chestnut is attached on top of the plasticine. It is better to lay it down with the rough side.
4. Ready mushroom can be decorated. For example, rowan berries will look original on a mushroom. Around you can make grass, it will turn out beautiful from spruce needles.

chestnut animals

Many different animals can be made from the fruits of the chestnut tree. Let's consider some options.

Bug

To make an insect, you will need the fruit itself and the peel from it, as well as plasticine, twigs.

The craft is done as follows:

1. The peel needs to be slightly dried, it is not required to divide it in half.
2. An oval or a flattened ball of brown plasticine is attached under the peel.
3. Branches are attached to the plasticine on the sides - these will be the legs of the insect.
4. Now the head of the beetle is attached from the chestnut, on it you need to make eyes from plasticine and antennae.

Caterpillar

To make a caterpillar you will need:

• several fruits of a chestnut tree of the same size;
• plasticine;
• toothpicks.

Let's start crafting:

1. In one of the chestnuts, you need to make two small holes and stick halves of toothpicks into them. It is recommended to stick small balls of plasticine on the tips. This will be the caterpillar's head with horns.
2. Plasticine eyes are attached to the same fruit.
3. The remaining fruits are attached to each other with small plasticine pieces. The chestnut head will be extreme.

Bear

To make a clubfoot inhabitant of the forest you will need:

• chestnuts;
• plasticine;
• "hats" of acorns.

1. The body of the bear is made from large fruit.
2. For the head, a smaller chestnut is taken and attached to plasticine to the body.
3. For ears choose the smallest chestnuts.
4. Paws are made from acorn caps, and the eyes, nose and mouth are molded from plasticine.

Spider

A spider can be made very easily and quickly. Required:

• one chestnut;
• 8 toothpicks;
• plasticine.

Four holes are made in the chestnut on the sides, broken toothpicks are inserted into them - these will be paws. And eyes are molded from plasticine. The spider is ready.

Cheburashka

To make a fairy-tale hero, you need 8 chestnuts and toothpicks.

It is done as follows:

1. Small holes are made in chestnuts for toothpicks to connect the fruits together.
2. Larger chestnuts are chosen for the head and torso, and smaller chestnuts for the ears and paws.
3. After all the chestnuts are connected, the face is drawn with a felt-tip pen or made of plasticine.

Creativity using natural materials is always a fascinating process. Create, experiment, create your own unique products.

63 photos of chestnut craft ideas

Ornamental trees or topiaries are firmly established among the popular types of needlework. Such crafts are made from various materials: paper, fabrics, sweets and almost any material at hand. But this is not the limit. Very beautiful topiaries are obtained from natural materials, such as chestnuts or acorns. The cost of making such a thing is minimal, and those who prefer things made from natural materials will appreciate such a gift. Good examples of such creativity:

Preparing chestnuts for work

Before you start doing this decorative tree, you need to know that after harvesting, chestnuts should lie in a cool place for 2 to 3 weeks. This is necessary so that the collected material collapses as slowly as possible, after all, chestnuts are not eternal. Their shape should be flattened on both sides, so the chestnuts will not bulge and lie more evenly on the surface of the base. In order to create a beautiful tree the first time, you need to study in detail our do-it-yourself chestnut topiary master class, proposed below.

List of materials for chestnut topiary

• Newspapers in large quantities to create the basis.
• Glue "Joiner".
• Threads to fix the shape of the base.
• Stick for the trunk.
• Flower pot. It is needed to create a stand.
• Gypsum, which is useful for filling the stand, this will improve the stability of the tree.
• Twine for decorating a flower pot.
• Chestnuts to create a topiary crown.
• Thermal gun.
• Bronze-colored paint and tea (they are needed to decorate the tree).

1. Creating the basis for the product

The creation of this kind of crafts always begins with a base - a ball or other figure, on which decorative elements are attached to create a crown. For the base, you can take foam ball or just make it yourself from newspapers. To do this, you need to take a large amount of paper and form a ball out of it. After that, glue all the bumps. Glue "Joiner" is well suited for this. Next, you need to wrap the future base with threads, it will become more dense.

2. The trunk and the attachment to it of the base

Like any tree, a topiary must have a trunk. It can be made from thick wire or Chinese sticks tied together. The easiest option is a simple, straight stick. In order to attach the base to the trunk, we take a ball and make a hole in it 3-5 cm deep, without damaging the threads that strengthened the base. Pour glue inside and insert the stick.

3. Preparing the tree stand

The topiary stand can be absolutely anything: a beautiful mug, a bucket, an old box, and so on. But this craft will stand in flower pot. In order for the tree not to roll and fall, it is necessary to strengthen the stand with some kind of filler. There are many options, ranging from ordinary pebbles (gravel) to gypsum. Just it should be used in this work, of course, more time will be spent, but the topiary will be more stable. Mix the solution according to the instructions, and wait until it begins to solidify little by little. Insert the stem with the base into the center and press a little so that the structure is fixed. Leave for half an hour.

4. Decoration of the stand, trunk and crown formation

After the plaster has hardened, you can proceed to the main design of the tree. The stand can be decorated with various methods: sequins, acrylic paint, decorative paper and much more. In this case, twine is used, which is tightly wrapped around the pot. In order for such a decor to fit snugly against the walls, you need to glue it every 4 cm.

Now it's time to start decorating the base. Chestnuts are glued from the center with a heat gun.

What this tool is and how to use it is described in detail here:

After all the chestnuts are glued, you need to close the gaps, they are very clearly visible in this photo:

This workshop uses tea. Coat all empty areas on the base with Joiner glue and sprinkle them with tea on top and press. It is necessary to make sure that not a single gap is left, otherwise the work will look sloppy.

We do the same with the stand from the inside: we grease the gypsum and the walls with glue, after which we sprinkle with a dense layer of tea.

The final touch: applying bronze-colored paint to the edges of the stand and decorating the walls with pieces of twine, dyed with coffee, in the form of curls. A chestnut can be placed under the trunk of the topiary, after getting rid of excess tea leaves. The chestnut needs to be planted on glue.

In order to diversify the chestnut tree, you can add another natural element to the composition - cones. But how to make a topiary from cones and chestnuts? Very simple! We do everything that is described above, up to point 4. Now, when you start gluing the chestnuts to the base, the gaps between them should be made a little wider. And instead of tea, use small cones so that they do not stick out too much against the background of chestnuts.

Inside the stand, they can also be added on either side of the chestnut.

We make topiary from chestnuts and acorns

This kind of crafts can be diversified not only with cones, but also with other natural materials, for example, acorns. Below is mk with detailed description and photo.

Work materials

• Newspapers to build the foundation.
• Gouache for coloring the base.
• Thick wire. It is used for the trunk.
• Twine for decorating the trunk.
• Thermal gun.
• Chestnuts and acorns, they are needed to create a crown.
• Iron can and plaster. They are needed to work on the stand.
• Beads, ribbons and colorless varnish. Decoration elements for working on topiary.

1. The basis for a tree of cones and acorns

This lesson uses newspapers as the base material. How to make an even and dense ball out of them is described in detail above.

The base is ready, now you need to paint it in Brown color using ordinary gouache. This is necessary so that the gaps in the process of forming a crown from chestnuts are not noticeable.

2. Creation of the trunk

The barrel is made of thick wire, which is wrapped with twine. The wire must be twisted, and the ends placed at an angle of 90 °, so that the future trunk is held more tightly in the stand.

Take the base and make a recess of about 4 cm in it, drip inside the hot glue and insert the barrel there.

3. Topiary crown decoration

In order for the tree to look neat and attractive, chestnuts need to be selected the same size. How to prepare them for work was written earlier. Glue the chestnuts tightly to each other in the form of a circle using a heat gun. In the middle of each ring we glue a twine twisted in the shape of a ball.

The crown is ready, it should look like this:

Now each gap between the chestnuts needs to be sealed with acorn caps.

4. Preparing the Stand

As a stand, you can take a small iron jar. Take the twine and start wrapping the future stand as tightly as possible. Every 4 cm, apply glue to the sides of the stand to help the string hold better.

After that, dilute the plaster, the mixture should be thick enough, so it will harden faster, and insert the barrel into the stand, exactly in the center.

When the plaster hardens, you need to paint it in the same color that the base was painted in.

After that, put chestnuts inside and acorn caps on top.

5. Product decoration

Using hot glue, decorate the crown with beads and ribbons, do the same with the stand.

And the final touch: cover the tree with a colorless varnish, this will make it easier to care for it and transform the final result of the work.

From natural materials that are lying almost under our feet, you can make a variety of beautiful gizmos. If we take chestnuts as a basis, then you can add any elements to them. For example, instead of acorns, nuts, then you get a full-fledged topiary of nuts and chestnuts. One has only to change one detail and apply imagination.

Autumn has fully come into its own, which means it is the right time to practice your favorite handicraft. And today we will learn how to make a topiary, or, as it is also called, a “tree of happiness”, from chestnuts. I recommend picking chestnuts at the end of September, when there is still no heavy rains. For a topiary, it is better to select chestnuts that are flattened on one side, they look neater on a tree and are easily glued to the base. And in order to refresh the rather dark chestnuts on the crown of the tree, we will alternate them with white paper flowers made using the quilling technique. So let's get started...

For work you will need:

1. Chestnuts;
2. Coffee beans;
3. Silicone adhesive;
4. Styrofoam ball;
5. Brown gouache, brush;
6. Can of coffee;
7. Water;
8. Building plaster;
9. Small wooden stick;
10. Brown tape;
11. Jute thread;
12. Satin thin tapes green, white and yellow;
13. White flower lace.
14. Stationery and manicure scissors;
15. Sheets of white and yellow paper;
16. A quilling tool or just a wooden skewer;
17. Ruler;
18. Simple pencil;
19. Glue - pencil;
20. Sisal green.

We take a wooden stick, which will serve as a tree trunk. The length and width of the stick depends on what kind of trunk you want to see in your tree. Completely wrap the stick with brown tape.

We will take a foam ball as the basis for the tree crown, if you do not have the opportunity to purchase such a ball, then it can be easily made from newsprint and thread. We put the ball on the stick, if necessary, lightly fix it with silicone glue. The ball should sit tightly on the stick, not swing.

Now we fix the future tree in a tin can or in any flowerpot. To do this, in a separate container, mix building gypsum with a small amount of water,

we should get a mass that is similar in density to fatty sour cream.

Pour the gypsum mass into a tin can and insert the tree trunk into it. We are waiting for the complete solidification of the gypsum. This will take approximately three hours.

The next stage of work will be decorating a jar or flowerpot. To do this, we will use jute, which, starting from the top of the jar, is wrapped in a circle, tightly gluing each subsequent thread with silicone glue to the joint with the previous one.

Here's what should happen.


Let's decorate our flowerpot with lace flowers,




in the center of which we glue one coffee bean.

Now let's take a look at the crown of the tree. So that in the future between the chestnuts glued to the crown of the tree no white spots can be seen, we completely paint our ball with brown gouache.

While the painted ball dries, we will make paper flowers. We draw a white sheet of A4 paper into strips 2 cm wide, and yellow - into strips of 1 cm.

Both sheets are cut into strips.


Now each strip must be carefully cut into a fringe, without cutting a few millimeters to the end.




Then glue the yellow one to the white stripe.

We insert the free end of the yellow strip into the quilling device and begin to gradually wind it up, slightly gluing it with glue - a pencil.

This is what the end result should look like.


After that, we put the flower with the petals down and lightly press on its middle so that the petals straighten out.


The flower is ready.


For the topiary, it will be necessary to make several of these flowers.


And finally, we start creating the crown of our topiary, that is, pasting the ball with flowers and chestnuts. We glue a flower on top of the ball,


and glue chestnuts around it.

In the second row we already glue 4 flowers, and between them we place chestnuts.

In this order, glue the entire ball.

To decorate the gaps formed between the chestnuts, we will use green satin ribbon. We cut the tape into segments 4-5 cm long,

fold each segment in half and glue it into the gaps between the chestnuts.



From above we decorate the flowerpot with sisal

and, as if by chance, a fallen chestnut. Under the crown we tie three multi-colored satin ribbons to match the whole composition: white, yellow and green.

Autumn chestnut topiary is ready!

This tree looks very impressive. And with a careful attitude towards it, it will be able to please you and your family for a very long time. Good luck and may the creative process always be a holiday for you!

Irina Demchenko
Сhudesenka.ru

Autumn chestnut topiary: tree of happiness in eco style

An excellent use for chestnuts can be found in creating topiary for interior decoration. In autumn, many craftswomen like to make useful stocks: collect chestnuts, acorns, nuts, leaves, berries and twigs. All this is done in order to see some interesting master class and create an autumn composition with your own hands. And why not topiary?

Do-it-yourself chestnut topiary: where to start

Chestnut topiary is made in the same way as other ornamental trees. Almost any master class assumes the presence of a base ball, a trunk, and a pot in which the tree is placed. Topiaries differ in the location and decor of chestnuts. It is possible to make a natural tree when the fruits are presented in in kind. Or you can color the chestnuts, give them a different texture, etc.

Twine, decorative braid and even artificial pearls are great for decorating the crown of a chestnut topiary.

Whatever the crown of the future tree is made of, it must be painted to match the chestnuts so that no gaps are visible

So, master class, stage one:

• First you need to make a base ball with your own hands. Today, foam blanks are being used more and more (you can buy it at a needlework store).
• If you do not have such a ball, take a children's rubber ball, tennis ball, any round object.
• You can make a ball with your own hands from papier-mâché, or simply crumple up newspapers and wrap them with thread. If you grease such a ball with glue, it will be dense.
• The second moment is the planting of the ball on the barrel. The trunk is actually any stick, from a twig to a pencil. Make a small incision in the ball with scissors so that the barrel enters it.

You can buy a ready-made flowerpot, factory-decorated, matching in color and texture with your tree.

You pour gypsum mortar into the pot, and when it starts to set, you insert a tree with a ball into it. While the plaster hardens, the trunk must be supported.

The decor of the pot can be deliberately simple. It all depends on whether you decorated the chestnuts yourself. If not, then decorate the pot more naturally: wrap it with twine, and in the middle of the lace thin ribbon with a beige button in the middle.

Foam ball for topiary (video)

Autumn chestnut topiary: step two

The master class is drawing to a close. Much is done by hand, and then you need to glue the chestnuts themselves onto the base ball. Not round chestnuts are considered ideal in work, but such flattened, flat ones. The bulge on the crown is also not needed, so glue flatter chestnuts on hot glue, starting from the top.

For a chestnut topiary in your arsenal, there must be materials for decorating trees and flowerpots

Gaps between chestnuts cannot be avoided, so they need to be covered with something. It is not difficult to guess that it should be something that matches chestnuts in color. For example, tea. Yes, regular loose loose leaf tea. Another master class suggests taking not tea, but sisal in the color of chestnuts or a flowerpot.

By the way, if you still decide to stop at tea, then it can be done with the top layer on gypsum. Tea is also a fragrant component of the topiary, which automatically makes the tree even more attractive.

So that the pot does not weigh down the structure, the gypsum mixture should be poured into 1/3 of the volume of the container

Well, what is a master class without additional decor?

To complete the image of a chestnut tree can:

• Pistachio shell;
• Small slices of dried citrus fruits;
• beads;
• Coins in a vase;
• Openwork braid;
• Corrugated paper, etc.

Depending on the presence of a particular decor, the topiary can be decorated in different ways. The main algorithm of actions is from large to small. That is, at first larger elements are attached to the crown, then the gaps that appear are already covered by small decor

So-called tandems can diversify the idea of ​​\u200b\u200bchestnut topiary. This, for example, is a topiary made from acorns and chestnuts, or from chestnuts and nuts.

Nut topiary (video)

Topiary from acorns and chestnuts: place and decorate correctly

The principle of creating a tree will be the same.

But since you have decided to make a mix of acorns and chestnuts, think about how it is more interesting to present them:

• Option one - paint. Aerosol paints in this regard can be considered the most suitable. Make some chestnuts and acorns golden, some just varnish. It remains only to glue in the correct order, avoiding the accumulation of parts of the same type in one place.
• Option two - write. Painting acorns and chestnuts, of course, is a delicate matter. But today this is a real trend - do-it-yourself painting of round smooth objects, such as stones and the same chestnuts and acorns. Are used acrylic paints, dot painting is preferred, in which light optical illusions are possible.
• Option three - creating embossed acorns and chestnuts. For example, painting acorns and chestnuts with white paint, and sprinkling salt on PVA. You will get such snowy embossed fruits, textured, unusual. For autumn topiary, such an idea, of course, is not suitable, but New Year's craft it will turn out what you need.

You can diversify the decor of chestnut topiary with greens, flowers, cones or acorns. Also perfect for this purpose beautiful autumn leaves or berries

The use of nuts is also welcome. It can be walnuts, small pine nuts or pistachios already familiar to everyone. They will have the same function as acorns - a mix of autumn fruits on one tree.

Autumn topiary (video)

There are some points that one master class takes into account, while the other does not offer to do. You, of course, with your own hands and your ideas can improve the situation, come up with something new and interesting.

But take the following tips into service:

• You can make a topiary from mixed chestnuts. Leave some, as they say, “natural”, wrap others with twine or twine. Then use the material for winding in the decor of the pot.
• In some places, only chestnut hats can be glued.
• The same chestnut hats can be dyed in golden color and fill with tea leaves. And dried circles of oranges and cinnamon tubes will make such a topiary a real appetite stimulant and the best flavoring.
• You can do this: on one side of the topiary, attach a small squirrel, which should hold one chestnut or nut with its paws. A squirrel, by the way, can also be made with your own hands.

It is not necessary to make a topiary crown in the form of a sphere. For autumn composition you can also use a heart or a hemisphere

A chestnut tree can be a symbolic gift, a sign of attention to a girl with chestnut hair. This is a subtle compliment that a brown-haired woman will definitely appreciate.

Selection of pots for topiary: respect for proportions (video)

Appetite comes with eating - you just decided to create your own chestnut tree, and it is already overgrown in your mind with elegant decor highlights, such cute “details” in the form of cones, rowan berries, beads and buttons.