DIY jewelry made of beads and ribbons. We weave bracelets from ribbons and beads with our own hands - diagrams, step-by-step descriptions of the progress of work and videos

Bracelet in French means wrist. This jewelry has ancient roots, when many years ago it was made of elephant bone, leather or wood, and served as an excellent amulet. Today they are in great demand and are an addition to stylish look many women.

We will consider the production option with my own hands beaded bracelet. As a result, its owner will have original decoration on the wrist.

To make it, you need to prepare:

- seven pearls or other beads;
- a tape about 3 mm wide;
- fastener;
- a candle;
- two rings;
- two clamps.

How to make a bracelet:

In this case, you can choose any color that you like. We direct the lit candle to the end of the ribbon - this is done so that the beads pass freely into the hole. Tie a knot on the ribbon.

Take one bead and thread it through the ribbon.
Then tie a knot again.
Thus, the bead will hold well, as it will be fixed on both sides.
In turn, we do the same with all the other beads and do not forget to make knots.
We try on the tape on the wrist and cut off the unnecessary part, and then singe the other side with a candle.

Bracelet made of ribbons and beads

Ribbon and bead jewelry is a handmade product that will surprise you in its ease of creation. Since all that will be required is minimal costs, in contrast to the purchase of jewelry made using this technique. In general, the tape is quite widely used by craftswomen when assembling jewelry with their own hands. Their variety is the most diverse: satin, velvet, nylon, shibori ribbons, both wide and narrow. All of them are used in various types scenery. For example, beads, necklaces, pendants, chokers.

DIY bracelet

And now, dear needlewomen, I want to show you several master classes available. I'm sure everyone can do it. I bring to your attention such a gentle spring bracelet.

Preparatory process

In order for us to get started, we need:

• beads
• fishing line
• Candle
• Scissors
• Needle
• Satin ribbon

Video master class bracelet made of ribbon and beads

Step by step creation

It is necessary to choose a strip that matches the diameter of the bead. A needle is needed with a narrow eye. A thread to match the color can serve as a replacement for the fishing line.

We unwind the line, the length of which is 18-21 cm. The entire length is not useful, the remaining one is needed in order to make it convenient to string our ribbons and beads. We thread the line through the needle and tie a double knot at one end only. We take a segment of 45-55 cm. Stepping back from the free tip of 20 cm, we thread it with a needle.

String the bead on the fishing line and thread the ribbon down with a needle, vertically to the extreme point.

Step back 1.5 mm, bring the needle up, and string again. Similarly, 8 more pcs. The future bracelet is already visible.

At the end, in the same way as at the beginning, make 2 simple stitches. Hold the knot at the beginning, pull the beads together. Straighten the resulting accordion

When the result is visible, tie the end of the fishing line to the 2nd knot and cut off the unnecessary end.

It is necessary to hide the forest knots, therefore, in their place, tie knots on both sides. Do not overtighten, it is necessary to preserve the visual lightness of the product. This kind of knots are necessary in order to hide small flaws.

Trim the ends and burn. As a result, you get an original bracelet made by hand.

Festive necklace

But just as we girls love to be feminine and beautiful not only on holidays, but also on ordinary weekdays, I want to show you extraordinary beauty - an ornament for any outfit. It will take a minimum of time. Even a boring office outfit will look festive if you put on such a product.

Accessories for work

To create a necklace we need:

Video master class of an incredible necklace

Necklace making technique

Let's get to work!

Loosen 35 cm from the edge, thread the needle. String a bead and tie a knot over it.

We pass the needle with the thread to the wrong side and apply our bead near the knot. We sew it through the holes.

We return to the beginning. We find a knot and begin to tighten the working thread. Here's what should happen.

With the help of beads we fix the last stitch and be sure to burn the ends.

Flower for product decoration

We use two colors: beige and brown. Their length should be 56 cm. Put on top of each other and tie a knot

This is how the beauty comes out.

The final stage remains - gluing the flower to the main product.

Incredible beauty! Try it and you will surely succeed!

Chain, ribbon and beads necklace

The peak of popularity today in the world of beauty is all kinds of jewelry for the neck from chains of different links with rhinestones.

IN given master The class will need materials such as:

• crystal beads 8 mm
• chain 26 cm
• ribbon pink 130 cm
• two cords of 60 cm
• scissors
• lighter

There is nothing easier than making your own necklace in just ten minutes! Be beautiful!

Video master class “Jewelry from ribbons and beads”

Bracelet with ribbon and beads in 5 minutes: step by step photo tutorial

Do you have a loose satin ribbon and some beads? In just 5 minutes, these little things can be turned into a beautiful and original bracelet. Such a bauble is made very simply, even a novice needlewoman can easily cope with it. To make a bracelet with a ribbon and beads with your own hands, you will need the following materials and tools (Figure 1):

• Satin ribbon. The length should be equal to the circumference of your wrist plus 20 cm for ties (10 cm on each side). For example, if your wrist circumference is 15 cm, then the length of the tape should be approximately 35 cm.

• Large beads (15-20 pieces, depending on the length of the ribbon).

• Fishing line.

• Needle.

How to make a beaded bracelet

1. Stepping back from the edge of 10 cm, fold the tape in half to make a small loop. String the first bead on the needle with fishing line and pierce the loop with the needle as shown in Figure 2.

2. Make a second loop from the tape and pierce it with fishing line, pull it up. You have the first cell of the bracelet: a bead surrounded on both sides by a ribbon. (Figure 3)

3. Make such loops from a ribbon, stringing beads along the way. You should end up with exactly the same as in the next picture below. Make loops with beads until there is 10 cm left to the end of the tape.

4. When all the beads are strung, fasten the bracelet. Step back a little from the last bead and make a few stitches, as if wrapping the ribbon with fishing line, as in Figure 5.

The bead and ribbon bracelet is finished! It will be possible to fasten it on the arm with the help of two ties that you left on both sides: just tie them with a bow and that's it.

Such a cute bracelet will go well with a dress or any casual outfit. If you have a satin blouse or dress, then you can choose a ribbon exactly to match their color and make such a bracelet - you get a small ensemble. Instead of a satin ribbon, you can use a thin leather strip - you get a casual bracelet. Such an accessory can be worn in a casual outfit with jeans, a T-shirt and a leather jacket-leather jacket.

Now making jewelry with your own hands has become not only profitable, but also fashionable, and beads are the simplest product. There are a lot of ways to make homemade beads, so you can choose the most interesting option. In needlework stores, a lot of blanks and accessories for making beads are sold, so the main condition is a flight of fancy, which can result in stylish and beautiful accessories.

A variety of beads allows you to choose them for any outfit, from a business suit to beach dress. Usually beads are worn in the warm season, so now is the time to start thinking about making them. In this article, we offer several options for making beads of various types.

Bead and ribbon necklace

To make a bracelet with satin ribbons and beads you will need:

1. Satin ribbons of different widths

2. Beads 10-12 pieces, depending on the size of the bracelet and the size of the beads

3. Needle and thread according to the color of the ribbons

4. Scissors

5. Lighter to burn the edges of the tape.

For the bracelet, you need to choose ribbons of two colors. One tape can be taken 1.5-2 centimeters wide, and the second already - 1 centimeter. Need to narrow tape was placed on top of the wide one, and the edges of the lower tape were clearly visible. A wide ribbon will need 100 centimeters, and a narrow one - 30 centimeters. The color of the ribbon should be chosen according to your own preference. When choosing beads for a bracelet, you should consider their size and the size of the ribbon. For more large beads it is worth choosing ribbons of sufficient width. By choosing different colors of ribbons and beads, you can create many original bracelets for each set of clothes. Multi-colored bracelets that even children can wear also look original. It is important that the colors of both ribbons are combined with each other and the color of the beads. Making a bracelet.

The first stage is preparatory.

First you need to lay out the tape on a convenient surface. First you need to spread out a wide tape, step back 10-12 centimeters and put a narrow one on top. In the middle of the tape you need to sew with a regular seam, you can sew on a typewriter. The seam is needed only so that the tapes do not slip.

The second stage is the assembly of the bracelet.

Next, you need to sew all the beads to the ribbons one at a time. At first glance, this may seem simple, but here's the rub. Satin or silk ribbons are too slippery. Beads are also difficult to sew on. The first bead should be sewn on simply, without constrictions. Further, a small fold should be formed from the ribbons so that the bead turns out like between two tubercles. The fold of the ribbons must be fixed with a thread. When sewing beads, you should consider them round shape and leave enough space between the folds so that the bracelet does not bend in different directions. One bead should be left to decorate the latch bow. When all the beads are already sewn on, you should thread a needle and thread through all the folds and beads so that the bracelet is assembled into a single whole. Such stringing of beads can be done two or three times for greater strength of the jewelry.

The inside of the bracelet will not be very attractive. All seams and threads will be visible here. This can be decorated with a small piece of ribbon. To do this, you need to measure how much tape is needed to close the seams, and cut off the desired piece from the tape, the one that is wider. Carefully, making a minimum of noticeable seams, you need to sew a piece of tape on the inside of the bracelet to hide the seams.

The third stage is the collection of a bow-latch for the bracelet.

Use a lighter or matches to burn the edges of the ribbons so that the threads do not split. On the side where the smaller part of the ribbon protrudes, it must be folded in half and tied in a knot near the first bead. The knot should turn out neat, you need to tighten it gradually. On the other hand, there should be a lot wide tape. From it you need to make a bow yourself, which will serve not only as a decoration, but also as a latch for the bracelet. The ribbon needs to be folded several times. It can be wound on two or three fingers, depending on what size the bow should be. In the middle, you need to flash the folded ribbon with a gathering seam to make a bow. In the middle of the bow, you need to sew the remaining bead. It is important to take into account the size of the bow and loop. The bow should go through the loop and hold the bracelet.

Bright wooden beads

Now it is very fashionable such a phenomenon as "colorblock" - combination of several bright colors. Making beads in this style is very simple, you just need to stock up on large round blanks for beads made of wood. You can color these beads acrylic paints, which can be the brightest colors. In addition, such paints after drying are not smeared and do not shed. You will also need a thin brush, jewelry wire or fishing line. Each of the wooden beads is painted with paints of half the diameter, painting over different colors every bead. Take better bright colors- pink, yellow, turquoise. The painted beads are left to dry, and then strung on a fishing line or wire so that they touch the painted halves. It is better to alternate colors. At the ends of the beads, fasten a clasp or tie a strong bow and put the product over your head.

Chanel style necklace

This stylish necklace was first shown at the fashion show of the house of Chanel. Similar decoration can be created at home. To do this, you will need several large uncut amethysts or decorative purple crystals. You also need accessories for the fastener, a large silver-colored metal chain and two rings.

The chain is cut into two parts, equal in length. At the end of one segment of the chain, a wire is threaded and attached. Next, stones or crystals are strung on it, and then the second end of the wire is fixed at the second end of the chain. A metal clasp is attached to the free ends of the chain using rings.

We girls always want to look our best. When going to work or for a walk, many people spend most of their time choosing clothes. Clothes thrown out of the closet, lying in a mountain on the bed, are a common thing. Often this is an indicator that the girl is going to an important event. In such chaos, we often forget one thing. important detail- accessories. Beads, necklaces, bracelets, rings are an important part of a woman's wardrobe. Unfortunately, not everyone remembers this, and some deliberately neglect decorations. But still, any girl should have at least a few of these accessories. What to do if it is not possible to buy all this in expensive stores?

IN Lately as never before, things made by one's own hands (the so-called handmade) began to be valued. Modern fashion shows that they are more popular among fashionistas than factory ones. Moreover, it is not difficult to make such accessories. The most simple in execution are the tapes. It may seem that for a girl who has never experienced this, it is impossible to do this. But that's not the case at all.

Types of beads

First of all, you need to understand the types of materials for weaving. There are a huge number of different beads, so you need to know at least a little about them. The simplest is In addition, there are more expensive beads made of semi-precious or precious stones. Many have heard about them more than once, they are also used in weaving jewelry with their own hands. But such decorations are already expensive. handmade, so you should start learning from the simplest material.

From beads and ribbon?

There are many different bracelets. In this, as in any other matter, you just need to figure it out. Let's start with one of the easiest bracelets to make. It is worth noting that such a bracelet is very popular among fashionistas, because it looks very beautiful. For weaving, you will need beads, fishing line or silicone thread, a needle. Silicone thread can be found at any craft store. So, thread the fishing line or thread into the needle, tie the ends. Leaving 20-25 cm from the edge, tie the ribbon with a small knot and start weaving from it. The needle must be inserted in the middle of the tape. Make a small fold of the tape according to the size of the bead and stretch the fishing line. Next, we put the bead on the fishing line and again pierce the tape, after making a fold. The weaving process is clearly visible in the photo.

So we continue weaving to the desired length of the bracelet. At the end, you need to make a knot from the tape directly near the last bead.

Beaded necklace

As you can see, any girl can weave bracelets with her own hands from beads and ribbon. Learning to weave simple bracelets, you can go to more complex weaves jewelry. You need to find patterns for a beaded necklace, choose the one you like and get to work. And here, too, it is better to start with simple ones. In addition, master classes with step by step photos. With the help of such lessons, everyone can learn to weave jewelry. Weaving bracelets with your own hands from beads and ribbon is an opportunity to have exclusive jewelry made in your own style.