Knitting by hand without the use of knitting needles and hooks. We study large knitting on hands and on objects What can be knitted without knitting needles

Did you know that you can knit a trendy scarf collar without any knitting needles and hooks in just an hour? You don't believe it? Then you - here!

Now I will tell you an extraordinary story about how in a certain kingdom in the Astrakhan Museum of Local Lore, at an interesting, exciting master class, magic is taught! Here everyone will be taught how to make a trendy and practical thing - without exaggeration!

In order to learn to knit, you do not need anything but yarn. Don't believe? Sleight of hand and no cheating.

To the one who came up with the idea to use instead of thick knitting needles own hands, you need to give the Nobel Prize Order for the idea. Knitting with your hands without knitting needles and a hook is simple, fast and downright masterpiece! Knitting on fingers is much easier for beginners to learn than on knitting needles. Because the loops can easily run away from the knitting needles, but not from the fingers.

Using this technique, you can weave a scarf, snood, belt. Once the algorithm is memorized, you can knit even with your eyes closed (or under the table at work 🙂).

For knitting by hand without knitting needles and a hook, you can use any yarn. From thick and fluffy yarn products are obtained voluminous, and from thin - fantastically openwork.

To knit a fashionable and beautiful snood, you will need:
- 3 skeins of yarn;
- scissors;
- your hands.

Loop set. Knitting with hands without knitting needles and a hook begins with a set of loops, right on the hand.

Take the threads from 3 skeins and make the first loop at a distance of about 1.5 m from the end of the threads. Put the loop on your right hand and tighten.

With the tail, throw a loop on left hand from bottom to top, take left hand left behind working thread and pull out the loop.

Put a new loop on your right hand and tighten. Make 10 loops (the width of the future product depends on their number).

Take the ends of the thread with your left hand and dial the loops with your right. Do it as if you are knitting with knitting needles. Knit like this until the length you need.

Finish knitting on your hands as follows. Transfer two loops to the left hand. Take the nearest loop, pull over the second and tighten. So on the left hand there should be one loop. Repeat the steps until the knots on the right hand run out.

Leave the last loop on the left hand. Cut the thread coming from the ball. Pass the tail through the remaining loop and tighten. Turn the scarf inside out. Sew the edges of the product by hand.

Thanks to such amazing needlework as knitting by hands, we got such an unusual scarf-snood.

Are you weak to tie one with your own hands without knitting needles and a hook? If you know how to use these tools, then it will be easy for you to understand knitting with your hands. Surprise yourself. Good luck with your work.

Master class host Roza Malmanova (left) with the author of the article (right)

Many thanks to Roza Malmanova for the interesting and useful master class! And now - look, I specially shot a video for you, where I show how to knit with my hands without knitting needles:

© Text, photo and video - Ainagul.

If you have never held knitting needles or a hook in your hands, then you should start by buying these tools.

Spokes are:

• Straight (A). At one end, as a rule, there is a plug so that the loops do not fall off.
• Circular (B). They are interconnected with a string.
• Stockings (B). Double-edged, usually sold in sets of five.
• For knitting harnesses and braids (D). They are distinguished by a bend in the middle.

They can be made of metal, plastic, wood or bone. To learn the basics, you need ordinary knitting needles. Best of all, steel ones, since aluminum ones can stain light-colored yarn, wooden ones cling to fluffy threads, and plastic ones often break.

Hooks are made from the same materials. There are models with handles and cheeks for holding.

Knitting needles and hooks differ in numbers. The number is the diameter in millimeters. It is usually indicated on the instruments themselves. The larger it is, the thicker the yarn should be. An important role is played by the material of the knitting needles or hook. For example, steel hook No. 1 will be slightly different from the same plastic one.

The metric systems of knitting needles and hooks differ by country. Keep this in mind if in the future you will knit according to English or Chinese patterns, of which there are so many on the Internet.

Yarn is natural (wool, angora, cashmere, mohair, cotton, linen), synthetic (acrylic, viscose, polyester and others) and mixed (for example, 25% mohair and 75% acrylic). For your first stitches, it is best to use synthetic or mixed yarn. She is smoother and more obedient.

The label will help you choose knitting needles or a hook for yarn.

Manufacturers usually indicate the footage and weight of the skein, the composition of the threads and the recommended number of knitting needles or hooks. Yarn labels are best kept.

In addition to yarn, knitting needles or a hook, colored paper clips, pins, scissors, a tailor's centimeter will also come in handy.

How to read knitting patterns

Many girls first learn to knit from their grandmothers and mothers, and only then they get acquainted with the patterns and instructions. If you didn’t have such a school, it’s better to figure out how diagrams are read right away.

When knitting, the pattern is indicated by cells. The number of cells horizontally corresponds to the number of loops in a row, and the number of cells vertically corresponds to the number of rows. In every cell symbol one loop or another.

Here are the typical designations for loops. But in specific schemes there may be other signs. Always study them carefully.

When knitting, the rows in the diagram are read from bottom to top and alternately: first from right to left, then from left to right. Circular rows are always read from right to left.

When crocheting, the rules are the same. IN circular knitting crochet pattern is read from the center to the edges.

The rows in the diagrams are usually numbered: the odd ones are facial, and the even ones are purl. Also on the diagrams you can find round or square brackets. They highlight the repeating part of the pattern - rapport.

Any item can be knitted or crocheted. , as a rule, know how to do both, but prefer one thing. We invite you to try both knitting techniques to find out which one is closer to you.

Set of knitting stitches

There are various ways to cast on knitting needles. The following is considered traditional:

Front surface

Knit and purl loops are the basis of knitting. Having mastered them, you can knit your first simplest pattern- gum. But first, an important point.

Any loop has a front and back wall.

knitplanet.com

You can knit for one or the other, but the result will be slightly different. Therefore, the front loops are divided into classic (those that fit in the front wall) and grandmother's (knit in the back wall). Clinging and pulling the thread behind the back wall is easier, especially for beginners.

This is how grandmother's facial loops fit.

And here is the classic method of performing facial loops.

Pick up the loops and try to knit several rows of facial loops: grandmother's or facial loops - your choice. This facial surface or garter stitch.

Wrong side

Purl loops are divided into grandmother's and classic according to the same principle. Watch the following video tutorial and you will understand how grandmother's purl loops are knitted.

Classic purl loops.

Knit several rows in one way or another. You will get the wrong side.

Elastic band 1×1

Having practiced knitting and purl stitches, you will be able to complete your first knitting pattern - 1 × 1 elastic. You have probably seen it on sweaters and scarves.

By the same principle, you can knit an elastic band 2 × 2 or 3 × 3.

Closing loops

To complete knitting, the loops must be closed. This is also done in different ways.

The Russian method is used most often.

The elastic method is usually used for rubber bands.

To close the loops in the Italian way, you will need a needle with a large eye.

The crochet hook can be held like a pencil (left) or like a knife (right).

Try it both ways and decide which is more convenient for you. After that, you can begin to master the basic loops. In crochet it air loops and double crochets and without.

Chain of air loops

In crocheting, any fabric begins with the first loop and a chain of air loops. You can make the first loop in various ways. Their variety is presented in this video.

Single crochet

Another base element in crochet - single crochet. Here's how it knits.

But at the loops crocheted, also has an anterior and a posterior wall. Depending on which of them you will start the hook and pull the thread, the pattern of the canvas will change.

Double crochet

Knitting is all about practice. The more you knit, the better it will turn out. Having perfected single crochets, you can move on to a more complex element - single crochet or multiple crochets.

Knitting resources and YouTube channels

During the Soviet shortage, many women were fond of knitting. But there were very few sources for learning and inspiration. Pattern patterns and various techniques were copied from each other by hand, and also carefully cut out from home economics magazines.

In the age of the Internet, there are many more sources. Online great amount sites and YouTube channels with educational articles and videos on knitting.

If, after knitting your first loops, you feel excited and want to learn more, bookmark the following resources.

Cold, inhospitable weather helps to warm up. And what will warm you better than a thing made with your own hands? This little guide will teach you how to knit scarf without using knitting needles.

Our article contains detailed video thanks to which even a beginner can knit such a magical scarf!

How to knit a scarf without knitting needles

YOU WILL NEED

• 4 skeins of very bulky yarn (1 skein - 100g/40m or 150g/100m)

WORK PROCESS

An alternative to knitting is weaving. You just have to choose the threads of your favorite color and pleasant structure, find half an hour of time and be inspired. Anyone will be delighted with such a gift! Watch and learn how it's done.

Surprisingly simple, right? When I watched this video, I immediately wanted to do something like this knitted thing. Now such scarves are very appropriate, they look super cool with many outfits. beautiful shawl not only warm, but also add aesthetics to any image. And most importantly - the creation process is not at all complicated, shown in detail.

I confess that I have a violent passion for voluminous scarves. Because I hate wearing hats!

Various color schemes beckon ... I hope our article will help you meet the cold season in full readiness.

This helpful video will help you learn how to wear a snood scarf like a pro. It can also be stacked and tied in different ways!

A small gift for everyone who is not indifferent to snoods. Such charm can be made even from a sweater!

And even a thin scarf can be tied like a snood! Fold the scarf in half lengthwise and tie the tassels together. Turn the scarf over so that the tassels are inside, wrap around the neck several times.

If the video instruction made you want to urgently run after the threads, there is nothing surprising. Show your friends an easy way to weave a warm scarf by sharing this article with them. Cosiness and warmth to you in these chilly days!

For many, winter and cold are primarily associated with things coarse knit, and the first among them is a large cozy scarf. Today we will learn how to knit the best of these scarves, and so as not to be bored, we will literally knit it on our hands. Interestingly, this knitting with its giant loops is super-fast, and you still have time to impose similar gifts before the New Year for the whole family.

To you will be required:
- About 280 m (3 large skeins) of thick (refer to the picture below) non-fluffy and preferably natural yarn;
- Scissors;
- Cardboard paper towel tube (it's long and wide enough to hold the loops when you take a break; any equivalent will do, and not necessarily that wide).

1. You will work with 3 skeins at the same time: unwind the ends from each and evenly combine them with each other into a “bundle”. At the same time, it is convenient to put the skeins in a basket / box / package so that they do not “scatter” from you during operation.

2. For every 10 loops, you will need about 1-1.4 meters of yarn: you need a thread of sufficient length to make enough loops that will “sit” on your wrists and a little further on your arm. To cast on, start by setting a 1.4 m “tail” from the triple tip of the yarn, because the first time you will cast on 11 loops.

3. Start with a slipknot. Put the yarn on your left hand, in your right hold the tripled end of the yarn that comes from the skeins. With your right hand, make one turn of the yarn around the fingers of your left hand.

Holding thumb with the left hand the crossed ends of the yarn, remove the resulting loop and insert the upper end of the yarn into it from the back - see picture - forming a second loop.

Then just pull on the second loop on one side and the loose ends of the yarn on the other, tying a knot.

4. We put the final loop on the right hand on the wrist. To reduce the loop, simply pull on the end of the yarn that goes to the skeins.

5. To cast on the second loop, grab the loose tail of yarn (not the end that goes to the skeins) and form a separate new loop from it, as shown in the picture below.

Insert your left hand through this loop and, after inserting it, grab the end of the yarn that goes to the skeins.

Turn the loop that you hold with your left hand slightly counter(!) Clockwise and put it on your right hand. Tighten the loop by pulling on the ends of the yarn. Be careful: your yarn is triple - never pull on only one thread out of three, otherwise you will quickly get messy knots. The second loop is ready! Continue like this until you have cast on 11 stitches in total.

6. A scarf is knitted with right hand to the left, and then from the left to the right, then again from the right to the left, etc. In defiance of traditional knitting on knitting needles, instead of turning the knitting over at the end of the next row, you will knit loops from the left hand to the right, i.e. e. in the opposite direction - about this in paragraph 7. Now forget about the free tail until the very end of knitting.

Now in your right hand, it turns out that you have a new loop clamped, which you need to put on your left hand. Put on by pulling your hand through the loop at the top side and forward, as shown in the picture. Putting the loop on the left hand, tighten it.

Next, we continue to knit all the loops from the right hand in the same way, only now it will be more difficult to do this, because both of your hands are closely drawn to each other, but it's easy to get used to. Do not forget to tighten and tighten, if necessary, the loops already cast on, otherwise they will turn out too big size.

7. Now all new loops are on your left hand. Then we proceed according to absolutely the same principle, just the opposite. With the right hand we take the tip of the yarn coming from three skeins.

With the right hand, we remove the loop from the left wrist and drag it forward. We release the loop that is in the right hand.

We pass the right hand from the top in front and forward through the new loop clamped in the left hand, we put on a new loop on the wrist of the right hand. Don't forget to tighten the loops. We continue the same process, changing hands, until we knit about 150 meters of scarf fabric.

8. Tired of knitting? Simply transfer the loops to a cardboard tube from paper towels or equivalent. Then take a thick thread, thread it through the pipe and tie the thread over the pipe and yarn so that the latter does not come off. When you put the loops back on your hand, make sure that the knitting is always facing - i.e. pigtails - towards you. To decide which hand to wear on, remember that the working tip of the yarn (which comes from three skeins) should point forward.

9. The specificity of this knitting technique is that the knots on the sides will alternate from too loose to too tight. This is due to the fact that here we do not turn the knitting over. Therefore, at the end, if desired, stretch some knots and, accordingly, pull the others along the sides of the knit.

10. When the knitted fabric is ready, you need to close the edge. Start, as with normal knitting, with a set of 2 new loops. And after that, you need to take the first new loop and drag it over the second new one on the same hand. And let go. As a result, you will have only one new loop left on your hand. It is these final loops that do not tighten too much!

You pick up another new loop, place it on your hand, again drag the one that was on your hand before through the new one and release it again: so to the end of the row, at the end we make a knot, pulling the ends of the yarn through the last loop. We leave the free tail of the yarn long for now.

When sewing, use the same remaining tip and zigzag it loop by loop without gaps between the two edges of the scarf. In order for the seam to “magically” get lost in the scarf pattern, both on the initial edge of the scarf (from which you knitted forward) and on the final tail of the yarn, we pass it under the “V”-shaped loops in the pattern on the front side of the scarf (see pictures).

At the end, we make a knot, tightening it tightly, we make another one on top. We leave 20 cm from the ends of the yarn and weave these ends into the seam from the wrong side of the scarf, making additional, but not too massive knots. Ready!

IMPORTANT: remember that such knitting with constant friction dries out and thins the skin of the hands, so think three times before just replacing the knitting needles with your own hands. However, thin gloves will be a great help here and will allow you to join the fun knitting technique without hurting yourself.

After reading the article, you will learn about what is knitting without knitting needles from thick yarn, and how to do it correctly. We will look at how to knit a beautiful and voluminous scarf with our own hands, without using knitting needles.

In addition to working on the hands, this master class teach those who want to knit on the fingers. If among you there are those who want to master knitting on a ruler, you also came to the right place, and you will find everything you need in the lesson.

To begin with, we will conduct the first master class in the lesson, in which we will consider exactly hand knitting where, apart from yarn and your hands, no more materials and tools are needed. Needlework on hand is simple and fast, as well as fun and fun activity which allows you to make great things.

In the lesson, we will look at how to knit a stylish, voluminous scarf without knitting needles, exclusively with our own hands. Let's start looking at knitting by hand with the choice of yarn.

You can knit a product on your hands from any yarn, but the quality of the scarf will be completely different. By purchasing thick or fluffy threads for this knitting technique, you will get a voluminous and loose fabric. A thin thread, on the contrary, allows you to tie a thing with a magnificent openwork pattern.

We knit without knitting needles fashionable and stylish scarf under the name "Clamp".

To make a scarf with your own hands, you will need three skeins of thick yarn, where one skein weighing 100 grams contains 100 meters of thread. In this case, woolen or mixed (wool with acrylic) yarn is most suitable. Snood measures 150 centimeters (cm) long and 30 cm wide.

Video master class on knitting snood on the hands

To better understand the topic "Knitting on the hands", you are offered a video that will tell you in detail and intelligibly about this type of needlework. The work is done from very thick yarn, in two threads. The master class tells how the set of loops on the hands is carried out.

The typing technique is exactly the same as the one we talked about earlier. After dialing P, you need to tie the first R, and then all subsequent rows. Having tied the fabric of the scarf to the required length, we close the P of the last row.

This video tells beginner needlewomen in detail about how to do hand knitting without knitting needles. By repeating all the steps that are shown in this video, you can make a stylish and spectacular accessory.

Video: Hand clamp

Two ways to knit on the fingers

Consider knitting on fingers, without knitting needles, which can be done with two different techniques. In the course of knitting with fingers in the first way, a single chain of threads is obtained. Such chains are often used to knit various things, as from thick threads.

Consider first way finger knitting.

Second way begins by wrapping the thread between the fingers in the same order as in the photo.

Video: Knitting on the fingers of a scarf necklace

This video master class will help beginners to consolidate the information received on how knitting is done from threads on fingers. Here, knitting a scarf necklace is done in the second way.

We examined knitting with our hands, learned to knit on our fingers, and now we will try to knit a scarf on a ruler.

Knitting a scarf on the Brumstick line with MK video

Video master class demonstrates knitting a beautiful openwork scarf with a hook and a ruler.

1. We will dial for the sample the number of loops, a multiple of five. In our case, 15 air loops are dialed.
2. Then we knit this entire chain with single crochets.
3. We stretch the last P to such a size that it can fit on the ruler.
4. Next, we grab the back wall of each P from the chain, and stretch the working thread through it, forming a new loop, and again placing it on the ruler. As a result, the ruler should get 15 new P.
5. Having received 15 P, we remove them from the ruler, and put on again only 5 pieces.
6. We grab the working thread, and we drag it through all 5 P. We make an air P, fixing 5 large loops.
7. We tie a group of 5 Ps with single crochets, after which we string the next five Ps on the hook, and we also tie them.
8. We finish the series with this technique.
9. We continue knitting, and draw new large loops from the top row of columns, placing them on the ruler.
10. After that, the knitting cycle is repeated again. Continue knitting on the ruler, following all the instructions of the video lesson.

What can be tied on the hands: photo ideas