Cut a man's hair with a beginner's clipper. Machine haircut at home

The stores offer a huge range of equipment, which are designed to perform a variety of hairstyles on their own at home. machine, you must follow some rules for the technique of high-quality hairstyles.

Clipper haircut - the easiest way for home hairdressing

The technology of a more complex hairstyle is produced as follows:

• Nozzle No. 1 or No. 2 is installed. The device is held with the blade up. Treatment starts from the neck area, from the hairline. Curls are cut to the occipital region.
• Then the nozzle changes to No. 3 or 4 and the curls are cut to the crown. Then the nozzles are again replaced and the strands at the temples are cut off. Then nozzle 4 or 3 is fixed again and the strands are cut from the temples to the crown area.

• The device is led to the crown. It is impossible to cut along the growth of curls, since in this case the strands are obtained in different sizes.
• In the process, a comb is used, and the curls are removed on top of it.

Clipper haircuts always start at the back of the head. At the end of the procedure, the strands on the temples and neck are trimmed.

WATCH THE VIDEO INSTRUCTIONS

Before cutting your hair with a machine, you need to moisten it and comb it thoroughly. The strands are divided into several zones. In this case, parting is carried out from the depressions on the forehead to the back of the head. This is how the temples and the parietal region are separated.

The following zones are obtained:

1. parietal;
2. two in the temporal areas;
3. three in the back of the head.

What matters is the quality edging on the neck. It is trapezoidal or rounded.

With the help of a machine, a semi-box is made. It suits almost all men, except for too elongated faces.

In the traditional version, the back of the head is cut with a device with a small nozzle.

Long strands can start closer to the crown or much lower. The hairstyle is done with or without bangs. This option is not suitable for curly curls. It is forbidden .

How to cut under the machine with the transition?

In order for a model haircut to turn out smooth, you need to make the right transitions. At the same time, the processing process by the device must be accurate and of high quality. The comb must be held in the left hand.

The strands are sheared in stripes. First, the forehead area is cut, then the back of the head. For the back of the head, a smaller nozzle is used.

The haircut is performed from below, and the device is led up. First, the machine is pressed against the surface of the head, and the apparatus is torn off from the top of the head. This evens out the difference between the strands. Then whiskey is cut with the same nozzle.

From the parietal region, it is necessary to perform smooth transition. From short strands at the edging. The edging is made at the neck and behind the ears without a nozzle. Then the length of the strands is checked throughout the head.

All shortcomings in the haircut are corrected.

How to cut whiskey?

An important step is the edging of the temporal region. Whiskey can be oblique, rectangular, up to the lobe or middle of the ear.

Start laying should be from the temporal areas. In this case, the curl is separated by a diagonal parting. Then the hair is combed over the face, and the corner of the temple is trimmed. Then the strands are combed down, and the temporal part is trimmed.

The movements of the device should be easy and effortless.

How to cut bangs at home?

Under the machine with bangs are complex. For cutting bangs, the largest nozzle is selected. In this case, the bangs are cut with a comb, which lifts the strands to the desired distance. The cut with the device is done over the comb. It comes out right the first time.

Understand the most simple rules machine haircuts and go

With the help of a typewriter, you can make a short haircut or create a complex hairstyle.

Well-groomed appearance is important for everyone, but it is not necessary to go to the hairdresser and pay money for a haircut. With patience and the right tools, it is quite possible to cut your own hair right at home. Get your clipper and scissors ready and start by trimming the hair on the sides and then move on to the back of the head and the top of the head. A little patience and attention to detail, and in a matter of time it will be possible to light up with a neat and stylish haircut!

Steps

Part 1

Preparing your hair for a haircut

Wash your hair before cutting. Clean and combed hair will be easier to work with. Wet your hair with water and then use shampoo and conditioner. Be sure to rinse each product thoroughly after using it on your hair.

Comb your hair. Run the comb through your hair and use your fingers to detangle tangles if needed. So the haircut will be more neat and accurate.

• If your hair dries before you finish combing it, mist it with water until it's wet.
• Take advantage special tool to facilitate combing or its natural counterpart to detangle severely tangled areas.

1. Dry your head with a towel. It is better to cut hair with scissors slightly damp (but not wet), and a haircut with a machine involves working with dry hair. If water is still dripping from your hair, dry your hair with a towel to dry it. Then use the comb again and detangle the hair if it has tangled again.

   • When cutting wet hair, the result will be slightly different when the head is dry, as dry hair will lie differently.

2. Find a comfortable place to get your haircut. A haircut can take up to several hours, especially if you have never done it before. Choose a place where you can sit comfortably and not have to worry about a possible mess.

   • It is best to cut your hair in the bathroom, where you will have access to water and a mirror.

3. Position yourself in front of a mirror. You need to see all your manipulations well. A large wall mirror in the bathroom or on the wardrobe in the bedroom will help you see the hair being cut on the sides and top.

   • If possible, use a second mirror behind your head to improve your view. A large mirror can be hung on the wall behind your back, or you can use a small hand mirror to be held by your assistant.

4. Divide your hair into sections. Draw side partings from the forehead to the back of the head at the level where the vertical contours of the head begin to round. Then comb the hair between the parting and the ear in a downward direction. Do this with both side sections of hair.

   • If you have long hair, use bobby pins to secure the top of your hair and keep it from falling into the side sections.

5. Trim the side sections of your hair in sequence. Take the clipper, set to a short length, and bring its blade up to the head in such a way as to cut the side sections of the hair from the bottom up. At the top, tilt the clipper blade slightly away from your head to create a smooth transition from the cut area to the rest of the hair mass. Repeat the procedure with the second side before moving on to cutting the back of the head, and make sure that the smooth transitions on both sides are the same and are on the same level.

   • Working against the direction of hair growth allows you to achieve a better cutting result.
   • Some clippers have special attachments for cutting around the ears, which make it easier to work with these areas. Use them (if available) to get a better cut around the ears.

6. Move on to cutting the back of the head. After trimming the sides, trim the back of your hair to the same level you trimmed the sides. Make sure your haircut is even. To do this, ask a friend to place or hold an additional mirror behind you to give you the opportunity to see your manipulations during the haircut.

   • If you are going for a regular basic haircut, use the same nozzle setting for the back of the head as for the side sections.

7. Shorten the bottom section of your hair more. To create a smooth transition in the length of the hair in the haircut, additionally run the clipper along the bottom of the hair, moving the attachment to a slightly shorter setting. Approaching the level of the earlobes and temples, gently move the clipper blade away from the head to smooth the transition from one hair length to another.

   • Work slowly to ensure the smoothest transition of hair length.

Part 3

Cutting the top of the hair with scissors

1. Use hair clippers to shorten the top of your hair. For more precise cuts, as well as to give the hair the necessary texture, use scissors instead of a clipper. You can buy hair clippers online and in most specialty stores that sell hair care products.

   • Do not cut your hair with utility scissors, as they are not sharp enough for this purpose, which is why there is a high probability of making a mistake.

2. Trim the top section of your hair in sections. Use your fingers or a flat comb to lift your hair up. Work slowly, separating strands about 5 mm thick for cutting. They should run parallel to the hairline at the front. As you cut each next strand, try to grab some of the previous strand's hair to use as a guide.

   • The quality of the haircut in the upper part is always more noticeable than on the sides and back of the head. Be sure to start your haircut with a conservative hair length. Remember that you can always make your hair shorter, but you can't put back what you've already cut.
   • Finished with parallel lines hair growth in strands, you can check the uniformity of the haircut by selecting a strand perpendicular to the hairline. The hair in it should be the same in length.
   • When trimming the top of the head, be careful, as it is usually more sensitive than the rest of the head.

3. Also trim your bangs with scissors (if needed). If you go with bangs, divide it into small strands. Comb each strand with a flat comb to the desired level and cut off the ends of the hair along the comb with scissors.

Part 4

finishing touches

Straighten the sides. Look at yourself in the mirror and make sure that the sides are symmetrical. Comb your hair with a flat comb and select two horizontal strands at the same level from the sides. See if they are the same length. If the strands are different, remove the excess length and any irregularities with scissors, shortening the hair a little bit. Remember that it is always easier to remove less and then adjust the length further than to immediately cut too much.

Trim your sideburns to your desired length. You can shorten them either with a razor or with a hair clipper blade. If you want to keep long sideburns, cut them off at the bottom edge of the ears. To make the sideburns shorter, cut them about at the level of the cheekbone, using it as a guide.

• Bring your index fingers to the sideburns to check their symmetry after cutting.

1. Create a smooth transition from the sides to the top of the hair. Smooth the sides of the hair with a comb, hold the scissors vertically and round off the protruding corners with them, if any.

   Finish edging the hairline on the neck. Take a clipper or beard trimmer to trim the hair growing on your neck. Start trimming at the top of your hairline and work your way down your neck to remove excess hair.

   • Use a hand mirror to check the edging to make sure everything is smooth and tidy.

2. Style your hair right after the haircut. After finishing your haircut, take a shower to wash off the cut hairs remaining on your head and body. Then dry your head with a towel, part your hair with a flat comb and style it in your usual way. See if you are satisfied new haircut. If not, fix it yourself or see a hairdresser for more significant changes.

Anna Lyubimova

There are many people in the world who prefer their own bathroom to beauty salons. If it has a couple of good mirrors, convenient cabinets and shelves on which you can lay out everything you need, it may well turn into a modern hairdressing salon - only without queues, pungent smells of chemicals and strangers who do not take their eyes off the unfinished styling.

Haircut at home "sin" both men and women. All of them can be conditionally divided into three categories:

• people are busy and undemanding;
• zealous owners, "thrifty" by nature;
• creative individuals.

The latter is especially interesting to implement with my own hands some extraordinary idea, so they are aware of technical innovations and devices with which you can create a trendy hairstyle on your hair. But all the rest fans" home salon» , although they reject the services of professionals, they want to look attractive and well-groomed.

Publication from Training of male masters(@barberexpert.ru) 14 Sep 2017 at 10:36 PDT

Women achieve this goal more easily. Curls and curls hide some of the mistakes of an amateur hairdresser. But men's hairstyles require clear contours to look decent, smooth transitions from one hair length to another, which cannot be created without special devices. Therefore, creative housewives and cheerful young mothers who cut their favorite household members on their own should buy a good clipper. Not a cheap device sold in a tent near the market, but a real quality thing with comfortable ergonomics and a variety of attachments. With their help, both classic and extravagant models are created. All of them can be classified depending on the method of execution.

Haircut under 1 mm

In traditional men's hairstyles this minimal attachment is used to shape the lowest hairline at the back of the head, but now the possibilities of its application have become much wider.

brutal single haircut has been very popular recently. It is very difficult to distinguish it from the familiar “under zero” option, and yet this is a haircut performed by a machine with a special nozzle. She gives men a somewhat stern look with a slight touch of crime. Needless to say, it makes them very beautiful. But athletes, supporters healthy lifestyle and hygienic procedures of life appreciate it for its simplicity and functionality.

Most of all this image suitable for owners of the correct head shape, with a high forehead, rounded nape, strong and slender neck. Although people with such an appearance to face and many other options for men's hairstyles. They work “one” very carefully, slowly moving from strand to strand, section to section, until you reach desired result.

To create such a bow, no other hairdresser's tools are needed. But if over time there is a need to change your style and with it your hair, you will need well-sharpened scissors, a thin comb and a compact hair dryer.

Men's haircut under 2 mm

Another option for a sports-applied style hairstyle is created with a two-millimeter nozzle. You can also start it with a “one”, then moving on to a “two”.

This nozzle leaves hairs a little longer than the previous option, but the resulting hairstyle is no less practical. She has a lot of advantages:

• just wash your hair and dry it quickly;
• they do not need expensive shampoos and conditioners;
• in the heat, the sensations will be fresher, and in winter there will be no anxiety due to the fact that the strands will be pressed under a knitted hat.

Posted by Daniil Rusalejev (@daniil_style) Mar 10, 2017 at 7:20 PST

Two millimeters paired with a single one will come in handy when decorating the temples. They are in the foreground - on the contours of the cheeks, not far from the eyebrows - and are a very important element that can decorate or spoil the whole look. Therefore, it is necessary to work on them especially carefully, without haste and without risk. With some experience, it will be possible to complete this procedure much faster, but at first it is better to move in microscopic steps. Even experienced craftsmen in this case “do not cut off the shoulder”, but act according to the principle “Measure ten times, cut once”.

Men's hairstyle under 3 mm

It is well known to many generations of men "Boxing" and "Half-boxing". Previously, such hairstyles were more often worn by the military, geologists - those who have no time to take care of their appearance and at the same time want to look collected and fit.

Today triple haircut photo often found in glossy magazines for stylish men. This option is often chosen by successful businessmen who want to emphasize their vigor and determination. It looks very organically with a business suit, giving the owner the touch of assertiveness and slight aggressiveness that is necessary in some negotiations.

Traditional trio haircut performed very quickly. Having stuffed your hand, you can finish everything in a maximum of 18 minutes. Moving smoothly with the right nozzle over the entire surface of the head, you can achieve the effect of a velvet cover, even and smooth.

Men's haircut with a machine

Over the "Half-box" will have to work longer. Here you can go two ways:

• remove the hair at the temples and the back of the head with a “one”;
• treat the top of the head with nozzle No. 4.

In any case, it is important to get a sufficiently contrasting transition between the top and bottom of the hairstyle. In the most trendy options, bangs and even tiny “tails” are added that bristle above the neck or the back of the head.

Publication from Training of male masters(@barberexpert.ru) 12 Sep 2017 at 3:50 PDT

Haircut for guys under 4 mm

This hairstyle is also many years old. Once it was a distinctive touch of the appearance of bespectacled scientists and romantic students, then it was worn out of habit, and not so long ago it again became one of the off-season hits. Familiar from old movies "Hedgehog" returned to our everyday life. Now it is worn mostly by young guys.

Despite the apparent complexity, "Hedgehog" can also be done at home. But before you get down to business, you should critically evaluate your own hair. If they are thick, straight and hard, the haircut will look perfect, for soft and curly it is better to choose a different hairstyle. Otherwise, you will have to constantly wear a certain amount of styling gels, waxes and varnishes on your hair.

Here, too, you will need several nozzles - the minimum ones for edging and the main one - a four-millimeter one - for the main cutting on the crown, back of the head, above the forehead.

In traditional versions, the Hedgehog does not have bangs. It is an integral part of the total mass of hair. Modern young people want to see themselves as more original, and therefore make their own adjustments to their hairstyle:

• cut bangs;
• comb it to one side;
• make out "torn" strands;
• leave a long thin "tail" on the back of the head.

Clipper haircut

Men's haircut under 6 mm

It has similar features to the "Hedgehog", it is based on the legendary "Tennis", but the overall impression is completely different. Uniqueness and individuality haircut "Beaver" give:

• square shape;
• flat crown, resembling a flat area;
• sides and back of the head cut to transparency.

You need to take on such a haircut only when it is not difficult for a home hairdresser to work with different nozzles and transitions from the microscopic size of the hairline.

When creating this hairstyle, haste is especially contraindicated. Otherwise, the result may not be a fashionable look, but separate “patches” that do not merge into a single image. Then only a haircut “under zero” will save the situation.

One more caveat. Scars on the back of the head (which, of course, adorn a man) are better to “hide” under the “Hedgehog”, but on a well-shaped head, “Beaver” looks very impressive. Young people often add bold touches to their hair - bangs combed to the side, an elongated nape, which is sometimes styled with a hair dryer.

Let's talk about another haircut under 6 mm, where the arsenal of expressive means becomes wider, several nozzles are used in the process, and the length of the strands reaches from 3 to 6 cm. We are talking about new trend recent years– men's Tomboy haircut. The base for Tomboy was the forgotten male "bean", which is "overgrown" (depending on the option) either with an elongated bang, combed to the side, or naturally shaggy strands at the back of the head.

Stylists believe that this haircut will become the most popular in the next few seasons, so there is reason to take a closer look at it and start mastering its elements now.

Men's haircut under 9 mm

Such a haircut cannot be performed without a smooth transition from one hair length to another. If the strands on the parietal or occipital part of the head are too long, the excess can be removed with scissors or the largest attachment, and then you can proceed to the phased processing of different zones - parietal, occipital, crown, temporal.

The pros do it this way:

• make out the back of the head;
• from it they pass to the sides and temples;
• then proceed to cutting

Nine mm nozzle often used in the treatment of the back of the head, but it is quite suitable for the crown. Hair over the forehead is cut last. Depending on the individual characteristics of the appearance of men, they are left longer to be combed to the side, or slightly raised with thinning.

Haircut under the nozzle 12 mm

This is a real piece of work. You can’t start it without washing your hair and walking through it with a fairly thick comb.

At the beginning of the haircut, you can not do without scissors. Clamping individual strands with your hands, you need to remove the excess, and then calmly move on to the nozzles. Received on simple hairstyles experience will tell you which one to choose for decorating the back of the head, making transitions from one hair length to another.

In today's hairstyles, nape cut with the smallest nozzles prevail. To the crown, if we plan to make it especially expressive, you can also approach with a twelve-millimeter paper. She is useful for romantic strands on the crown, which will beautifully recline back or fall down on the sides.

Clipper with 12 mm nozzle

Video tutorials for men's haircuts with a machine at home

This is a great visual aid for those who want to master the art of hairdressing. On the Internet, you can find many more videos with master classes that will help you with the basics of hairdressing. By reviewing professional and amateur videos, you can master the techniques of qualified professionals and become a real ace stylist for your home. And the money saved on salons should be spent on joint trips to the park or cinema.

Conclusion

Performing a men's haircut of various levels of complexity is not at all difficult, especially if you know where to start and have the necessary equipment at hand. To do this, the home stylist needs:

• high-quality clipper (preferably from well-known manufacturers);
• sharp scissors;
• a pair of combs;

Add to this the desire to see your loved ones beautiful and your love for them, and no famous kuafer can surpass your work.

September 27, 2017, 00:08

After the decision was made to cut hair only at home, all the necessary equipment was purchased, and even the first victim was found for an experimental haircut, a natural question arises - how to cut with a machine so that the hairdresser's homegrownness is not conspicuous? Or how to cut your own hair without getting fresh scars?

Any simple or model men's haircut starts with buying a car. It seems like a common truth, but in fact, it is easy to get lost in the world of shearing mechanisms - there are so many models in each row. The division of all devices into three main types according to the principle of operation will help to understand the assortment.

Vibrating machines

This type of device is one of the most economical and noisy. In addition to sound accompaniment, the payment for a small cost will be a small power - up to 15 watts and a short duration of continuous operation - up to 20 minutes. At the same time, the clipper will independently tell you when it gets tired, simply by turning off. For these reasons, experts will not cut hair with a machine of this rank, and by the end of the day the hand would be tired from the strong vibration that distinguishes such a device.

There is another reason why clipper cutting at home with an economical device can be disappointing - these are non-removable knives that are difficult to care for. Among the more expensive models in this series, there are semi-professional successful options, such as the Oster 616, which solved this problem easily and elegantly.

Rotary hair clippers

Cutting with a rotary type clipper is more pleasant due to the reduced vibration background, and a strong engine ensures uninterrupted operation of the device for more than one hour. The device is convenient for both specialists and beginners, it almost does not vibrate in the hand, but it is much more capacious than the vibrating one by weight.

Complete with the model and separately, comes a large number of nozzles with which any men's hairstyles are formed. Hair density and stiffness do not matter - any men's haircuts with a machine of this type are equally good.

Cordless clippers

One of the lightest and fastest devices and, of course, costs accordingly. In addition, the power of such models is carried out both through the battery and through the network - a great advantage for painstaking men's haircuts with a machine, especially for a beginner. The knives in the device change at the speed necessary for professionals, and the weight of the device - within 150 grams - makes it a toy compared to previous categories. You can cut, trim your hair with this battery mechanism both for yourself and for any other person.

What you need to know before starting a haircut

It is better to start a career in men's haircuts with a machine at home, with the formation of the most elementary models - boxing or semi-boxing. The schemes of both models are characteristic sporty style, that is, they imply a shortened nape and temples and an elongated crown. How to cut correctly can only be understood by capturing the essence of what should be the result, and this requires not a single haircut under the typewriter.

When cutting a man's hair with a machine in the absence of experience, there is no need to rush and strive to start the device, as soon as the "client" took the chair. Perhaps before that, your counterpart had a model haircut and to redo this beauty, you will first have to use scissors. Below is a fairly complete step-by-step instruction, for those who do not agree to be able to cut only bald.

Men's haircut step by step

The simplest men's haircuts for a typewriter begin with the removal of excess length and only then - from work, directly, with the device. Step by step instructions The steps on how to cut a man's hair are as follows:

Using a razor after the clipper is finished is the finishing touch of the process, but this trimming step is only required if the hairline at the back of the head dangles too low on the neck and is not aesthetically pleasing. Take a simple disposable machine and baldly remove the ugly and stiff bristles below the haircut line.

How to cut your own hair with a machine

How to cut your own hair if there is no way to turn to outside help, but the machine and the desire to learn how to do without a hairdresser are available? If you have not yet decided on a hairstyle, remember that the box half-box that goes to most male representatives is a male haircut with a machine, which is contraindicated for bright blond representatives who have short haircuts will create a feeling of baldness and those who have focal thinning of hair on their heads. The latter category of men is often advised to either grow their hair to a classic length, or shave their heads bald.

So, step-by-step instructions for those who cut their own hair:

• Wash your hair and dry it well. strands middle length you also need to comb well;
• If you have already had the opportunity to cut a man with a typewriter, then it will not be difficult to transfer the same actions to yourself. First, prepare the appliance by putting on the knife that matches the desired length of the bangs. Then sit down near the dressing table with a mirror and immediately prepare a second mirror on the stand, so that later it would be convenient to cut yourself with a machine from the back of the head;
• Try even if long hair do without scissors - with an independent haircut it is inconvenient. In extreme cases, if the technique fails, and the device cannot remove the required length in one go, first style the hair on the maximum nozzle, and only then adjust the desired length;
• Bring the device with the attached nozzle to the roots from the side of the bangs and, moving the device towards the crown, lay the first track along the central device, without deviating to the right or left side. The following paths will pass alternately to each ear, adhering to the angle of the knife at which the nozzle is constantly in close contact with the head;
• You can cut your own hair with a machine on the back of the head, already with the help of a second mirror, a smaller one, in which you need to look in such a way as to constantly see the entire back of the head and neck in the main mirror. Do not immediately try to organize smooth transitions, endlessly changing the length nozzles - process the back of the head with a small knife to the edging, give the desired length to the hairs on the temples and around the ears, and only then, using a knife No. 2 or No. 3, soften the borders of the transitions wherever necessary.

Important! It is advisable, at the final stage, when a razor is used and the space of the neck under the back of the head is outlined baldly, to turn to the help of a third party.

How to cut with a machine?

Hair has always been considered special decoration men and women. But everyone knows: it is not enough to have from nature beautiful hair, you also need to periodically cut them. How to cut hair with a machine?

Of course, haircuts created with a hair clipper are popular today, but not everyone knows how to do it. Scissors are harder to cut, but hair clippers are now great amount And yes, they are inexpensive. In addition, the ability to cut with a machine will help in Everyday life: it will be possible to cut your beloved man and a capricious child. In fact, curbing this "electric beast" is very simple and from our article you will learn how to cut hair with a machine.

Features of a haircut machine

In order to know how to cut with a machine, you first need to understand how it works and how it works. The hair clipper consists of two rows of teeth: the lower row consists of fixed teeth, the upper one consists of movable ones, while the former are larger than the latter. Hair cutting is obtained by sliding the upper row along the lower one, that is, the teeth of the machine work on the principle of scissors.

Remember the following points:

• machine cuts only dry hair. If you cut wet hair, then you will spoil the whole haircut, and greatly dull the blades;
• if the hair has grown a lot, then cut the ends of the hair a little with scissors before cutting;
• the machine cuts the hair only when it meets the resistance of the hair. This is the principle of the hair clipper. If you move the machine in the direction of hair growth, then the hair will bend down to the head and will not be in the teeth of the machine;
• when the machine, cutting the hair, reaches the top of the head, it is undesirable to abruptly take the machine away, because you can damage the hair. It is necessary to slowly separate it from the head.

Machine haircut technique

So, how to cut with a hair clipper? Let's say you found someone who trusted you with his head, combed his hair, plugged in the machine. For the first time, it is better to cut just under one nozzle in order to get used to the operation of the machine.

Take the car to right hand- should be on top thumb, and let the remaining fingers wrap around the machine from below.

1. Put the nozzle of the desired length on the machine and start cutting from the lower occipital area. Insert the machine into the hair under the roots and move it from the bottom up. Shake hair off the machine periodically to keep it from clogging. Thus, go through the entire occipital area.
2. Next, cut the frontal-parietal region (from the back of the head to the forehead) and temples. Do not leave protruding missed hairs and if you see them, run the machine again in that place.
3. Near the top of the ear shells, hair grows differently, so the movement of the machine teeth must be changed to direct them against the growth of the hair. A skilled hairdresser bends his ear with his left hand, and bends his left thumb, and the right one with the little finger.
4. Now you need to complete the edging - to give the haircut a finished look. Change the nozzle on the machine to the smallest one and gently smooth out the uneven transition from hair to body. Try not to shake your hand, otherwise you can ruin everything. If you try hard, the haircut will come out neat and even.