A ball of sisal do-it-yourself with legs. Sisal Christmas tree: a master class on making

Such floristic fiber as sisal can be seen today in every flower shop. More than one photo or video master class is devoted to the manufacture of sisal crafts. Sisal is made from the leaves of the Mexican agave, it is such a herbaceous shrub from the subtropics. Sisal fibers are coarse and hard, but very strong. Ropes, ropes, washcloths, brushes are most often made from this fiber. That is, production, far from artistic creativity.

But it was the masters of arts and crafts who drew attention to the fact that sisal is appropriate in needlework, as well as in the most different types decor. And now the video instructions tell you how to build such beauty.

Before making a beautiful souvenir tree, you will need a MK (master class) for making the sisal itself. If you could not find it anywhere, you can make it yourself. Where you should start is by visiting a hardware store. Buy a brush for whitewashing houses there, it is cheap, and you can pull a lot of fibers from it.

Choose brushes with a thin, durable pile, the pile must certainly be natural.

The next point is how to make such a sisal colored:

• Use dyes in tablets or powder;
• Fill any vessel hot water, add one tablespoon of vinegar there, and then the dye itself;
• Soak the sisal divided into strands in the resulting solution for two and a half hours;
• When the material dries, you can lay it out to dry on ordinary landscape sheets or napkins (of course, clean ones);
• For getting interesting colors you can mix shades;
• Used and natural dyes- in the photo you can appreciate how beautifully sisal is painted with ordinary potassium permanganate, beetroot juice, coffee grounds, etc. with your own hands.

And if you need a snow-white blank, you can soak the sisal in Whiteness, increasing the soaking time to six hours.

Very important: do not dry the sisal on newspaper or magazine sheets, it is possible that the letters will be imprinted on the material.

There is also such a thing as wicker (linen) sisal. How to make it with your own hands? Another small master class. Take an oilcloth, lay the prepared fibers on it in any order, and cover it well with wallpaper glue on top. Cover it all with another layer of film, press down with a flat board.

A day later, such a woven fabric can be used - for example, to make a sisal topiary.

Sisal Topiary (video master class)

Sisal balls for topiary: how to make

And one more simple master class for the future great diy. It involves the creation of sisal balls with your own hands.

How to make sisal balls:

• Divide the sisal into small pieces;
• Roll each piece slowly in your palms.

You yourself determine what size you need to make a ball for the topiary. Rolling circles is very simple, the denser, the more securely they will hold, the better the crown will turn out.

How to roll sisal balls (MK video)

Sisal Topiary: Master Class

Well, now you can start making sisal topiary. If possible, shoot the process on a video or photo, so that later you can make a video or photo master class, teach other novice masters.

So, you will need:

• Sisal of a certain color (for example, purple). You can take several colors if you are sure that you can combine it correctly.
• Pot.
• Gypsum.
• Styrofoam ball or any other base ball.
• Water.
• A branch from a tree. Of course, the trunk may be different, but the twig will do the job just fine.
• Scissors.
• Glue gun.
• Wire cutters.
• Decorative items of your choice.

Sisal topiary (photo master class step by step)

When the product is almost ready, the final touch remains in the form of a "zest" in the decoration.

Sisal Christmas Tree Topiary: New Year's Master Class

The most relevant video and photo tutorials are devoted to the manufacture of sisal topiary, the model of which is a herringbone. Such New Year's souvenir will great gift friends and relatives. This New Year's souvenir is made very simply, and how such a Christmas tree will help out on holidays - a do-it-yourself thing is always a more valuable present when there is such a New Year's occasion.

How is such a Christmas tree made? The main crown for such a tree will not be a ball, but a cone. Well, if the ball is clear where to get it, then how to make a cone? The easiest option is to twist it out of cardboard. And it is better to fix the cone with adhesive tape, and not ordinary, but painter's tape - the future Christmas tree will be stronger.

Also, a plastic base for a children's pyramid or a foam blank is suitable as a blank.

• The bottom of the cone must be closed in a circle;
• Take a piece of wire, bend one end of it;
• Pass the wire through the top of the cone, secure it with hot glue;
• Make a hole in the circle with scissors, thread the circle onto a pencil;
• Finally, glue the cone itself (future Christmas tree) on top of the pencil, glue the circle from below;
• Tear off a piece of sisal and fix it on the end of the wire with the same hot glue;
• Wrap the sisal tightly around the wire, and then begin wrapping movements around the cone, securing each turn with hot glue;
• Sisal should thus be wrapped around the entire cone;
• A pencil-trunk can be wrapped with twine or pasted over with silver narrow tape.

Decorate the pot too, moreover, you need to do this so that the color of the decor of the pot is in tune with the Christmas tree. For example, the Christmas tree is blue and the Christmas pot is also blue. If you want multicolor, it should also be in harmony. For example, the Christmas tree is green, and the pot is golden. In a word, the Christmas tree and the New Year's pot should overlap in color.

Well, such a Christmas tree will already be decorated the way you imagine. View photo or video examples of how other craftsmen decorate a similar colored sisal topiary. The Christmas tree can be decorated with a mini-garland, New Year's beads. It can even hang a festive ball, and not one - only very small ones.

Decorate the pot with your own hands - with golden braid, satin ribbons, snow-covered fruits. Inside the pot, on top you can put a small new year photo to make it clear who the gift is from.

Today you can make a decorative Christmas tree to decorate your home from various materials. For this, tinsel, cones, garlands, paper, cardboard, yarn, fabric are perfect. And for the decoration of such homemade Christmas trees buttons, beads, ribbons are used. There is another material that creates a wide field for needlework and crafts. These colorful sisal Christmas trees recent years very popular. At the same time, a sisal fiber herringbone can become chic decoration at home or a great gift.

How to make a sisal tree with your own hands

Necessary materials:

• cardboard A4
• sisal different colors(green, red, yellow)
• decorative ribbons
• a thread golden color
• gift wrapping paper
• beads
• cones

DIY sisal Christmas trees: master class

1. Cut out the template from cardboard and twist it into a cone, fixing it with glue

2. Cut out 8 cm squares from the sisal fabric. Roll them into balls.

3. Make boxes out of gift wrapping paper. Inside you can put foam bars. Tie nicely with ribbon.

4. Start at the bottom of the cone blank. Attach sisal balls and other decorations

5. Additionally, you can decorate the sisal Christmas tree with beads

6. Glue bows and other decorations, and you can put a red star on top

There are a lot of varieties of sisal Christmas trees. Each of them can take its place in your home. If you want to make a sisal stomp Christmas tree, consider the description in more detail. This fun craft will be a great addition to your Christmas decor.

Sisal Christmas tree master class

You can make your own Christmas tree from sisal in any way. One of them is described in this article, but you can, or.

The difference between the topotushka is only that instead of a pot it is necessary to put a Christmas tree on its legs.

Therefore, we will consider how to make the legs of a topotushka Christmas tree with your own hands

Necessary materials:

• glue gun
• eggs from kinder
• scissors
• glue "Moment"
• decorations

Cut off a piece from a small part of a plastic egg, as shown with a black marker

Attach this cut piece to the larger part of the egg.

We circle the resulting legs on cardboard in order to make two soles of the base

Paste the blanks with corrugated paper

Using hot glue, we collect all the parts of the boot in a pile

Glue the bottom of the boot with felt and make a stitch in front

Christmas tree is essential attribute New Year, on this holiday I want to please with a gift made by myself. great idea will make a Christmas tree topiary with his own hands.

coffee tree

There can be an unlimited number of options for making Christmas tree topiary, as far as human imagination can allow. The most versatile topiary is coffee, but what if you make it in the shape of a Christmas tree? IN this master class will be introduced step by step photos manufacturing process.

First you need to make a cone out of cardboard or thick paper. As a basis, you can use paper, newspaper, cloth or cotton wool, the main thing is to push it all inside. How to make a cone: a sheet of paper must be rolled up in the form of a bag, or you can first mark the diagram with a compass. The workpiece is overlapped with a thermal gun, ordinary glue, adhesive tape (double-sided can be used) or fastened with a stapler.

The cone can be planted on a paper coffee cup. The joints are glued with PVA or other suitable glue.

The cone is wrapped with twine, it is glued to double-sided tape or to Moment.

A golden ribbon bow is tied to the top of the Christmas tree. Instead of a bow, there can be any other decor.

From the bottom edge, the cone is glued with coffee beans. How many rows to do, everyone decides for himself, but you can lay out three or four rows, and then leave the twine. The first layer dries for about half an hour and only after drying can the next layer be glued.

Now the second layer of grains is glued.

The more chaotic, the better. So the topiary will look more voluminous. If desired, you can paint the grains with acrylic.

Now you can start decorating the cone. Bows are made from a ribbon, for example, of silver color and glued with hot glue, grains are glued into the center of the bows. You can arrange the decor arbitrarily.

The coffee tree is ready.

Another variation would be a Christmas tree with a trunk made from a tube or branch and planted in a pot. This is done like a standard topiary, it differs only in design.

Other options for decorating coffee trees are presented below:

Sisal product

An interesting option would be to make a sisal Christmas tree. What is sisal? This material is made from the leaves of a shrub - Mexican agave. Its fibers are very tough, coarse and very strong. No special technology is required to make the fiber. Its main purpose is the creation of decorative crafts, various brushes, washcloths, all kinds of ropes and ropes.

If you want to create a New Year's topiary from sisal, then you need to stock up on spruce needles and the corresponding decorative elements: tinsel, broken Christmas decorations, confetti, etc. The sisal Christmas tree is made in the same way as any other tree of happiness. The only difference is the shape of the crown. A sisal Christmas tree will be a great gift for loved ones or colleagues.

The crown of the tree is made of dense material, rolled into a cone. Tinsel, rain, bows, miniature toys are glued or strengthened with decorative needles on it. Also, a sisal tree can be an excellent lamp if you attach a garland to the form.

If it is difficult to independently choose the option of its design, then photos of finished works can help:

If the top of the Christmas tree is slightly bent, then it will resemble a tree from a magical forest and will surely appeal to both a child and an adult. You can give it as a gift or put it as an interior decor in your own apartment. A spectacular sisal Christmas tree will certainly create a festive atmosphere in the house. The decoration of the stand can be varied: cones, spruce needles, tinsel, ribbons and beads.

Christmas tree topiaries look especially beautiful if they are decorated with various small decorative elements. The option may be as follows: beads or beads are strung on a thread or wire and wrapped in a spiral product. The same can be easily done with fine satin, brocade or other decorative tape, lace or braid.

Artificial snow can be glued to a Christmas tree or a pot. It can be store bought or made from cotton wool. You can also cut out small snowflakes and stick on a tree. The gaps between the ribbons can be filled with small balls or bows. Not only Christmas trees decorated with small details will look beautiful, but also trees made of sisal balls. The only difference is that the surface of the topiary will be uneven. You can place larger balls at the base, and small ones at the crown. Simple and tasteful.

Video on the topic of the article

Sisal gives great opportunities for creativity. In the master classes below, you can see various designs and ways to create a Christmas tree:

Most best gift for family and friends - made by hand. Christmas tree can be made, for example, from sisal.

Sisal is a fiber made from agave and comes in a variety of colors, so the Christmas tree can be made in any color. Sisal is sold in a florist shop, you can also order it online without any problems.

Sisal tree: materials and tools

• blue cardboard;
• sisal blue;
• wire;
• white satin ribbon;
• blue organza ribbon;
• silver brocade ribbon;
• Christmas tree balls are small silvery;
• small beads of silver color on a thread;
• more silver beads;
• building plaster;
• small disposable cup
• wire cutters;
• scissors;
• simple pencil;
• scotch;
• glue gun;
• glue stick;
• masking tape.

Building gypsum is diluted with water to a state of thick sour cream. Pour into a small disposable glass, filling it about half way. Immediately, until the plaster has hardened, we insert a simple pencil or some kind of twig into the center, hold it so that it does not fall until the plaster seizes.

Cut off the empty part of the glass with scissors or a clerical knife.

We twist the cone out of cardboard, fix it with masking tape, you can use ordinary tape, but the masking tape, as for me, holds better. We also cut out a circle that will cover the bottom of the cone.

Cut off a piece of wire with wire cutters, twist one end.

We push the wire with a smooth end through the upper part of the cone, fix it with hot glue so that the wire does not scroll.

We make a hole in the circle with scissors and put it on a pencil.

Glue the cone itself on top of the pencil, to which we glue the circle from below.

We tear off a piece of sisal and attach it to the end of the wire with hot glue.

We tightly wrap the sisal around the wire, then we begin to wrap it around the cone, fixing each turn with hot glue, distributing the sisal over the entire cone.

Glue the pencil with a silver ribbon.

We glue the pot with blue organza tape. From a silver ribbon we make a bow and attach it to the front side of the pot.

Glue the sisal to the top of the pot with hot glue and cut it with scissors.

We attach small beads on a thread to a sisal tree, starting from the top, where the wire is.

Glue the beads with hot glue, around the cone, in a spiral.

TO Christmas ball tie a silver ribbon with a bow.

Glue to the end of the wire.

We tie several bows from a silver ribbon, which we attach to a do-it-yourself sisal Christmas tree in a checkerboard pattern.

In autumn, you often begin to think about the coming of the New Year with its festive mood, meetings with friends and family, and, of course, gifts. Besides, New Year all of us have been associated with a Christmas tree since childhood! Let's talk about her.)

Fortunately, people are increasingly thinking about what not to cut live Christmas tree for the sake of a few public holidays. "Cross" and I fully support this decision and believe that a do-it-yourself Christmas tree is much more interesting and humane! In addition, these are great options for those who have nowhere to put big Christmas tree(for example, there is no free space, or there is an active young child in this free space).

We bring to your attention large selection master classes on creating decorative Christmas tree with their own hands, which will serve wonderful decoration your home and original gift for a wonderful holiday!

Christmas tree made of cones

Very original Christmas tree with your own hands can be made from pine cones. But we will not use the whole cones, but only their scales, so that the Christmas tree is not too bulky.

So, to begin with, we will separate its scales from the cone. This can be done with a sharp knife, wire cutters or secateurs.

Be careful, take care of your hands!

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We turn the paper into a cone, glue it on the side and cut off the excess at the base.

Then we just take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, you can, as here, one above the other.

You can glue a clove on the top of the Christmas tree (such a spice))

After the glue dries, you can start painting our beauty. To do this, you can take spray paint or regular acrylic paint.

If you choose acrylic paint with a metallic effect, then your Christmas tree will look much more spectacular.

Then we cover the ends of the "twigs" with PVA glue and sprinkle sparkles on them.

This beauty is obtained as a result of these uncomplicated actions:

Exactly according to the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

Another very popular way to make artificial Christmas trees with your own hands is to weave them from beads. This is perhaps the most painstaking way, but for lovers of beading, nothing is impossible!

The detailed process of weaving Christmas trees from beads cannot fit in one article, so we share with you links to master classes previously published on "Cross".

Christmas tree made of paper and cardboard

If you have nothing to do in the workplace) or just want to add a little holiday to the office, make a Christmas tree out of paper. What's easier?)

And this Christmas tree is very similar to the design one, don't you think? It’s all the fault of the colored designer cardboard, which is so beautiful and bright that you don’t need to decorate the Christmas tree with anything else) which simplifies the process of making a Christmas tree with your own hands.

Secondly, to make a designer Christmas tree, you can use threads that are wound around paper cone according to the technology of manufacturing openwork balls.

Thirdly, flower netting and bouquet netting.

The manufacturing technology of these three Christmas trees is very similar, so the process of their creation is shown in one master class.

Feather Christmas Tree

Yes, they do too! You can buy feathers in hardware stores, or maybe you have stocks of bird feathers? For brightness, they can be dyed with food coloring. It looks original, beautiful and so airy!

Candy tree

A candy tree is not only beautiful, but also delicious! Such a gift for the New Year will be appreciated by everyone: both adults and children! Watch the video tutorial from Kateryna Bay and create!