home » Miscellaneous » What is the correct name for velcro fabric? Textile fastener (Velcro, Velcro, Velcro tape, contact tape, burdock)

What is the correct name for velcro fabric? Textile fastener (Velcro, Velcro, Velcro tape, contact tape, burdock)

All of us have had to fiddle with a naughty button or a deformed button fastener on a jacket for a long time and often unsuccessfully. These awkward moments spoil the mood, take away precious minutes, which is especially unpleasant when you have to rush to work, school or just on business. In many ways, this problem was solved when Velcro textile tape was invented. In everyday life, it has a different name, namely, Velcro for clothes. However, the use of Velcro does not end exclusively with clothing - it also found itself as an element of shoes, bags, tourist and sports equipment, curtains and even furniture.

What it is?

It is difficult to meet a person living in the modern world who would never have to deal with such an invention as Velcro tape. What is this element familiar to many of us?

Velcro tape is a textile strip that can be different color and width, it consists of two parts that interlock with each other due to the special structure of their surface. One of the halves is a rigid tape, covered with tenacious miniature hooks, they can have a different shape and structure. Their ending is somewhat reminiscent of fishing hooks, they are as diverse as tackle, because they consist of one, two or even four twisted tips.

The second half of the set, on the contrary, is a soft strip consisting of eyelets, thanks to which Velcro for clothes securely fastens what needs to be connected. Even the minimal contact of the two halves of the Velcro provides adhesion, sometimes so reliable that it is rather difficult to break the “stuck together” parts.

Velcro is useful everywhere and for everyone

Of course, the widest area in which Velcro is used is for clothing. Most often these are jackets, down jackets, windbreakers, tracksuits. With the help of a tape, the width of the cuffs and trousers is fixed, pockets, valves and clothing floors are closed (it acts as an additional fastener).

It is quite justified that Velcro is integral element casual, sports and children's clothing. The fact is that its base is a rigid nylon tape. Velcro is sewn on the inside, it will look rather rough from the outside, and besides, it is of little use for thin fabrics due to the fact that it will wrinkle and form sloppy folds.

In shoes, it has become a great alternative to laces, which is especially important for children. In the furniture industry, Velcro is used to create sofas and armchairs, it fixes pillows, armrests or even upholstery. IN Lately Velcro tape began to actively replace uncomfortable hooks and loops for attaching curtains and tulle to cornices.

How to choose a tape?

When making his choice, the buyer must clearly know for what purpose he is acquiring Velcro. Velcro textile tape, presented in clothing stores and accessories, is different. First of all, its color is different. You can easily find white, black, gray, blue, red Velcro. A little less often, sellers sell khaki ribbon, pink, light green or blue Velcro are just as rare.

Another important factor is the size of the Velcro. Manufacturers supply rolls of 25 m to retail chains, and they, in turn, sell tapes per meter, the price is set per 1 linear meter, and it directly depends on its width. So, wide Velcro is a five-centimeter tape, a narrower version is 2 and 1 cm. Of course, Velcro can be cut into pieces, because its base is a non-flowing synthetic material, but during production, its edges are processed with a narrow edge, along which the tape is sewn to product. The creators do not recommend stitching directly on the hooks and loops, as this deforms them and reduces their adhesion. There are also Velcro already cut into a certain shape - circles, squares and rectangles. The principle of their operation is exactly the same as that of the tape, but they can be fastened with rivets or glue.

Installation method

The last but very important difference that characterizes Velcro textile tape is how it is attached to products. Velcro for clothes is often simply sewn on, that is, it does not contain a sticky base. There are also samples that are treated with special hot-melt adhesives on the back side, they activate their effect after heating. Such a tape can be attached not only to fabrics, but also to metal, plastic, wood, glass.

The thermal tape is fixed to surfaces very reliably, it can withstand washing and a wide temperature range (from -10 to + 60 degrees Celsius). Such characteristics are especially important for clothing and footwear for special purposes (tourist, military, industrial, sports).

Care, replacement and precautions

The big advantage of sticky tape is that it doesn't require particularly delicate handling. Shoes and clothes with Velcro can be washed, even the most severe weather conditions are not afraid of it, that is, it will serve faithfully both in winter and in summer.

The only caveat is that sometimes the Velcro is damaged purely mechanically. Its soft side stretches, the loops cling poorly to the hooks due to stretching or tearing. The hard side can become clogged with dust, threads and lint. You can try to clean the tape of debris, but it would be wiser to replace it with a new one, just rebuff the worn part and sew a serviceable, undamaged Velcro to the old place.

fb.ru

Velcro | History of things

← The history of the gas mask The history of the hoop →

This is what is colloquially called the Velcro textile fastener, which works like a burdock. In 1948, it was invented by an engineer from Switzerland, Georges de Mestral. It was also called fleecy zipper, Velcro tape, pile, contact tape, burdock. Velcro in English-speaking countries was given the name "hook and loops", in translation - "hooks and loops", and it is also called "touch fastener" (touch fastener).

A type of clasp is a pair textile tapes with placed microhooks on one of them and microloops on the other. Microloops and microhooks touching and hooking. Thus, there is a "sticking" of one tape to another. Therefore, such a fastener was called "Velcro".

Swiss tourist and passionate inventor Georges de Mestral received his first patent when he was only 12 years old. The invention then was the design of a toy airplane. Once, returning from a walk with a dog in the foothills of the Alps, Georges found a lot of burdocks on his pants and on dog hair. Out of habit, taking off uninvited prickly guests from himself and his furry friend, he thought about the burdock.

The effort with which he had to tear them from the wool led him to the idea of a microscope. Examining the burdock under a microscope, Georges saw a lot of hooks that clung to the threads of clothing and dog hair. So the plant spread its seeds with the help of "living transport".

What he saw intrigued Mestral, and he decided to make a clasp according to the same principle as that of a burdock. He visited the world center of the weaving industry in Lyon, where he was advised by fabric experts on all matters of interest to him. Many of them were skeptical about his proposal. But there was one weaver who liked the idea set forth by Georges. On a small loom, he manually wove two strips of cotton fabric (one with hooks, the other with loops), which became the prototype of the modern Velcro fastener.

Georges noticed that on nylon fabric, if it is stitched by heating, hooks are formed, albeit small, but strong. Since then, nylon has become the main component of the fastener. Mestral worked for seven years before he managed to patent his invention. Swiss patent No. 2 717 437 "Velvet fabric and method of its production" was obtained by him in 1955. Georges de Mestral gave the name to his invention - Velcro (velvet hook). The Swiss company founded by him in 1952 was registered under the same name. The trademark, which appeared in May 1958, has exactly the same name.

But consumer popularity came to the invention of the Swiss almost 20 years later. It wasn't until Velcro found its way into NASA astronaut suits in the early 1970s that sales of the material began to grow exponentially. According to the wife of the late inventor, for the past 30 years they have lived only on patent royalties, which brought them the invention of Georges de Mistral.

xn----dtbjalal8asil4g8c.xn--p1ai

What is the name of the Velcro fastener

When purchasing shoes or clothes, often at the base there is such an element as a Velcro fastener. This detail allows you to improve the aesthetic qualities of the product, perfectly connecting different parts to each other.

Quite often, textile elements are used in production conditions, and for work on an industrial scale, quite a lot is required. a large number of accessories. You can buy products using the Internet by entering a sewing tape in the search bar.

Peculiarities

To begin with, it is worth saying that even such a product as a Velcro fastener has quite interesting story. The creator of the textile tape was the inventor Georges de Mestral, who drew attention to how the burdock firmly clings to clothes.

The man became interested in the plant, and he began to carefully examine and study it under a microscope. After that, the inventor decided to repeat the principle of connection, using textile material for this.

The product is based on two strips of cotton. Hooks were placed on the first, which captured the loops located on the second segment.

It was this technology that became the idea for the creation of Velcro products. A modern company is engaged in the production of velcro nylon fasteners, which got their name from the brand.

Such functional strips may differ from each other in the following qualities:

color;
size;
length;
material.

All of the above points depend on what clothes or shoes Velcro is used for. Often such strips are used in the manufacture of bags and briefcases. The main advantage of such sticky products is a high degree of fixation.

Main advantages

Compared to other types of fittings, Velcro fasteners have big amount benefits. These include:

the textile element does not impair the aesthetic qualities of clothing;
fasteners are functional;
Velcro are easy to use.

Quite often such fasteners are applied in tailoring of overalls as they do not create discomfort during work. High Velcro hold and ease of use allow you to quickly undress and dress without taking a lot of time to unfasten the locks and many buttons.

Another advantage is the low cost of products. Thanks to this, the price of workwear with Velcro fasteners is slightly different from other models.

It is worth noting that if dust or threads get on the surface, the strips still continue to work. The sticky side does not lose its functional qualities, and besides, it can be easily cleaned.

www.loveispassion.info

Textile closure - WiKi

Textile fastener (Velcro, Velcro, Velcro tape, contact tape, burdock) - a fastener used in light industry. Is good example biomimetics, because the principle is borrowed from the method of hooking burdock flowers, collected in spherical baskets with hooked wrappers. A kind of fastener, it is a pair of textile ribbons, one of which has micro-hooks, the other has micro-loops. When two tapes come into contact, the microhooks hook onto the microloops, and one tape “sticks” to the other, for which the fastener is called “Velcro”. The clasp is widely used in the clothing and footwear industry, and for special products.

Velcro is a registered trademark in many countries.

The idea of the invention came in 1941 to the Swiss engineer Georges de Mestral, the patent was received in 1955.

Georges de Mestral used to remove burdock heads from his dog's fur after walking with his dog. Once he examined them under a microscope, thanks to which he saw tiny hooks, with their help the heads cling to the hair of animals (for example, dogs). So de Mestral came up with the idea of Velcro. It took the engineer years of trial and error to implement it, as a result of which the inventor realized that Velcro is best made from nylon.

In 1955, de Mestral was finally able to patent his invention. Astronauts, scuba divers and skiers were the first to use textile fasteners. Over time, Velcro fasteners became widespread, becoming a common item. casual wear and shoes.

, Velcro with a sticky layer , Velcro fabric

Velcro is a Velcro contact tape, which is made on the basis of nylon (40%) and polyester (60%). We also produce velcro 70% nylon and 100% nylon. Hook Loop (English version of the name hook&loop) is a Velcro fastener that works like a burdock. On one of the two textile parts there are micro-hooks with a side cut, and on the second - micro-loops made of polyamide monofilaments. When they touch, the hooks and loops cling to each other. One of them literally sticks to the other, hence the name - "Velcro".

Velcro tape is widely used in various fields:

shoe industry;
garment production;
as a fixing accessory;
in the manufacture of curtains (lambrequins);
in the creation of special products, for example, body armor.

Velcro (velcro) - we produce contact tape in rolls of 25 meters, with a width of 16 mm to 100 mm. The color design of the Hook Loop textile fastener can be different - black, red, white, beige, blue, light blue, green, brown, yellow, orange, cornflower, burgundy, khaki, olive, gray, light gray and others.

Vesta produces Velcro contact tape in sets, that is, both parts are hook and loop.

The company also produces Velcro textile fasteners separately: loop tape (loop) and hook tape (hook).

Velcro 16 mm (1.6 cm) - characteristic: width 16 mm, color black or colored (white), price per pair (hook, loop).

Velcro 20 mm (2 cm) - characteristic: width 20 mm, color black or colored (yellow, beige, red, gray, brown), price per pair (hook, loop).

Velcro 25 mm (2.5 cm) - characteristic: width 25 mm, color black or colored (olive, khaki, blue, blue, purple), price per pair (hook, loop).

Velcro 30 mm (3 cm) - characteristic: width 30 mm, color black or colored white, price per pair (hook, loop).

Velcro 35 mm (3.5 cm) - characteristic: width 35 mm, color black or colored white, price per pair (hook, loop).

Velcro 40 mm (4 cm) - characteristic: width 40 mm, color black or colored white, price per pair (hook, loop).

Velcro 50 mm (5 cm) - characteristic: width 50 mm, color black or colored (olive, red, brown, green), price per pair (hook, loop).

Velcro 100 mm (10 cm) - characteristic: width 100 mm, color black or white, olive, army, blue, police, beige, gray), price per pair (hook, loop).

Why is it worth buying a Velcro fastener from Vesta:

has increased tenacity, in comparison with other manufacturers;
Velcro Velcro is resistant to dirt, high temperature and other influences from the outside, does not rust, easy to clean - can be washed;
fixes gently, but securely;
has a wide range of temperatures at which it can be used;
velcro maintains the integrity of the edges during the cutting process;
complies with standards and quality requirements.

We deliver Velcro in St. Petersburg to transport companies that take it to the points of sale: St. Petersburg, Moscow, Samara, Sevastopol, Crimea, Sakhalin, Salekhard, St. Petersburg, Moscow, Nizhny Novgorod, Rostov, Rostov-on-Don, Lipetsk , Tomsk, Omsk, Vladivostok, Yekaterinburg, Kaliningrad, Simferopol, Novgorod, Veliky Novgorod, Nizhny Novgorod, Samara, Volgograd, Astrakhan, Arkhangelsk, Petrozavodsk, Stavropol, Krasnodar, Sochi, Krasnoyarsk, Perm, Novosibirsk, Tomsk, Irkutsk, Murmansk, Khabarovsk , Yaroslavl, Ivanovo, Kazan, Yekaterinburg, Pyatigorsk, Cheboksary, Kursk, Kostroma, Nizhnevartovsk, Yuzhno-Sakhalinsk, Belarus, Kazakhstan, Alma-Ata, Astana, Minsk, Luga, Pskov, Volkhov, Tikhvin, Kirishi, Vyborg, Vsevolozhsk, Voronezh and others. Delivery available to all cities Russian Federation(RF), where TK is delivered, as well as to Kazakhstan, the Republic of Belarus.

Looking for quality contact tape? Place an order in the Vesta online store and take advantage of all the benefits of the purchase: affordable price, fast delivery and easy payment!

Velcro in English-speaking countries was given the name "hook and loops", in translation - "hooks and loops", and it is also called "touch fastener" (touch fastener).

A kind of fastener is a pair of textile ribbons with micro-hooks placed on one of them and micro-loops on the other. Microloops and microhooks touching and hooking. Thus, there is a "sticking" of one tape to another. Therefore, such a fastener was called "Velcro".

Velcro) - a fastener operating on the principle of a burdock. Invented in 1948 by Swiss engineer Georges de Mestral. It is a successful example of biomimetics.

Other names: fleecy zipper, pile, textile fastener, Velcro tape, Velcro tape, contact tape, Velcro. The English version is "Hook & Loop".

A kind of fastener, it is a pair of textile ribbons, one of which has micro-hooks, the other has felt. When two tapes come into contact, the micro-hooks hook onto the felt, and one tape "sticks" to the other, for which the fastener is called "Velcro". The fastener is widely used in the clothing and footwear industry, and for special products.

Velcro is a registered trademark in many countries. The word is derived from fr. vel ours(velvet) + fr. cro chet(hook).

On the International Space Station, Velcro is used to attach items to walls. On the Russian segment, all the walls are pasted over with a fleecy part of the Velcro. And on tools, pencils, and other objects, a hooked part with a special sticky backing is molded.

In Star Trek: Enterprise and Men in Black (film) the invention of Velcro is attributed to aliens.

Links

Wikimedia Foundation. 2010 .

See what "Velcro" is in other dictionaries:

This term has other meanings, see Snake ... Wikipedia

The fastener is a device for connecting various items of clothing, shoes, haberdashery items and other things. Varieties Photo Name Description Velcro Fastener acting on the principle of burdock: elastic hooks hook ... Wikipedia

Clasp- device for fastening; A necessary functional element for most types of clothing. Z. allows you to freely put on and take off clothes, create a certain volume of the product. Depending on the shape and purpose of the product, it can serve ... ... Encyclopedia of fashion and clothing

This term has other meanings, see Velcro. Textile fastener (colloquially Velcro, original name Velcro) fastener, acting on the principle of burdock. Invented in ... Wikipedia

Textile closure- the same as Velcro, colloquial. velcro, fastener consisting of two ribbons. The front side of one of them is covered with loops of monofilaments, the front side of the other is covered with loops of monofilaments with a side cut, i.e., hooks. When connecting two tapes, hooks ... ... Encyclopedia of fashion and clothing

Velcro is a 2011 detective comedy film directed by Rob Minkoff. Velcro (Lapulla), a genus of plants of the borage family. Velcro fastener fastener, acting on the principle of burdock. Wiktionary has an entry for Velcro... Wikipedia

- "Velcro" or "Velcro" (fr. Velcro) fastener, acting on the principle of burdock. Invented in 1948 by Swiss engineer Georges de Mestral. It is a good example of biomimetics. Velcro is a registered trademark in many countries. ... ... Wikipedia

Clasp: Velcro fastener, fastener, acting on the principle of burdock. A zipper is a type of fastener designed to quickly connect or separate two parts of a material. A button fastener on clothes designed to connect it ... ... Wikipedia

A button is a fastener on a garment that is used to connect its parts. The button on one part of the garment is threaded into the loop on the other part, and thus fastening is carried out. The simplest button is a disk with ... ... Wikipedia

Combined-arms suit of a new sample. The combined arms suit of a new sample is made taking into account the latest requirements for uniforms and can actually be used all year round. Structurally, the suit is a light jacket (tunic) and loose-fitting trousers. It is made from a durable 70/30 polyester/cotton blend with a weight of 220 grams. per 1m2 of authorized colors "digital flora". The jacket is equipped with a zipper, which, in turn, is covered with a windproof valve, securely fixed with textile fasteners, has a stand-up collar that prevents the fighter from chafing the neck of the fighter with body armor, and five pockets. Two frontal, two overhead on sleeves and one internal, waterproof, for documents. The sleeves of the jacket are reinforced with a double layer of fabric, and are securely fixed at the wrist with Velcro fasteners. The cut of the jacket itself is thought out so that it can be worn under warming layers, worn either tucked into trousers or loose. For quick identification in an emergency, and the insignia required by the charter, the jacket has six reliable attachment points - three above the chest pockets, and three on the sleeves. The trousers of the suit are loose enough not to hamper the fighter's movements, the knees and other loaded parts are reinforced with a second layer of fabric, elastic bands are sewn into the belt for automatic volume control. This allows you to wear a warming layer quite comfortably and in critical cases do without a waist belt. To accommodate the minimum required by a fighter, the trousers have six pockets. Two overhead cargo on the sides, two slotted, and two rear. At the bottom of the legs there are drawstrings that allow you to securely fix the trousers over combat boots, as well as belt loops, they allow for more precise adjustment in height, and make wearing trousers tucked into shoes more comfortable. color pixel Main features: coloring green pixel durable material Velcro stand collar for patches inner pocket CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: rip-stop Composition: 70/30 Density: 220 gr. Cuffs: Velcro Sealing elastic bands: ties Pockets jacket / trousers: yes / yes Seasonality: demi-season

A set of windproof smoke (jacket) and warm liner with Primaloft ® Black insulation, which can be worn separately as a stand-alone jacket Smoke: Can be worn with or without lining High and wide collar. A hood with a peak in which plastic is inserted to give a rigid form. The hood has three adjustments for a close fit Front zipper with two locks, unfastens both from above and below Windproof flap that covers the front zipper Velcro cuffs for smooth adjustment of the wrist girth Front flap and pockets are fastened with Canadian (on a tape leg) buttons , which are more reliable than regular buttons. Buttons have big size making them easy to handle when wearing thick gloves Volumetric pockets on the torso have a folded entry that protects the contents from falling out Pockets: 2 volume pockets on the chest 2 volumetric pockets on the bottom of the jacket 2 “Napoleon” pockets with zippers on the chest one flat pocket on the left sleeve and one inner left with a zipper Drawstrings: at the waist and bottom of the jacket, with elastic cords to keep the cold out under clothing and fastening when worn as a separate jacket, is made with the help of convenient American-style lenticular buttons. Hood, adjustable to the shape of the face. Hood interior lined with fleece for comfortable wear Underarm vents Knitted cuffs for comfort Inside left zip pocket 65% polyester Smoka lining: thin blend, 35% cotton, 65% polyester Main liner: 100% polyester Insulation: body - Primaloft® Black 2×133 g/m 2 sleeves - Primaloft® Black 2×80 g/m 2 Product weight: 46/176 size -1969 g 50/176 size -2097 g 54/182 size -2181 g 56-58/188 size -2439 g Also on the site are models of trousers with insulation Primaloft® YOU MAY BE INTERESTED IN: We strongly recommend front loading washing machines, if you own a top loading machine we recommend washing your clothes and equipment in a mesh laundry bag to protect against possible damage from parts of the washing machine drum . Before washing, close all zippers and velcro fasteners and fully relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. To remove stubborn stains, you can treat the stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash before washing, allowing detergent soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend using special compositions to restore the splash-proof treatment of fabrics in the form of a spray, or poured into washing machine such as Grangers Clothing Repel or Performance Repel or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Monochromatic jackets are recommended as a set for the summer uniform "Guard" M4, M5 or M12 in the off-season. Pockets: 2 capacious external pockets and 2 internal 1 with a zipper with a section for a fountain pen on the left sleeve Material: Twill (Twill) -100% polyester with PU coating Insulation: Sintepon 150 g/m 2 Product weight: 44-46/170-176 size -631 g 48-50/170-176 size -662 g 52-54/182-188 size -689 g from a glider soaring in the sky - you will not pass by this model. Flight jackets, which were supposed to combine functionality with simplicity, are reflected in this lightweight and practical urban jacket. The shortened demi-season jacket "Pilot" does not hinder movements and is convenient for a bicycle, scooter or motorcycle. Thanks to the durable, water-repellent, wrinkle-resistant material (Twill (100% polyester with PU coating)) and synthetic insulation padding polyester (150 g/m 2), of which the jacket is made, the Pilot easily resists bad weather, is quickly cleaned and retains its original appearance for a long time. Elastic ribbing at the collar, cuffs and waist provides soft yet secure wind protection. The powerful metal front zipper with internal wind flap makes a statement of reliability. Volumetric side pockets will allow you to place everything you need and will not let your hands freeze, and for the safety of small items, the jacket is supplemented with two inner pockets and a pocket on the sleeve. Monochromatic jackets are recommended in the set for the summer uniform "Guard" in the off-season. On the camouflage version, you can use false epaulettes. We strongly recommend using front loading washing machines, but if you have a top loading washing machine, it is recommended to wash your clothes and equipment in a special mesh laundry bag to protect against possible damage from parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Monochromatic jackets are recommended as a set for the summer uniform "Guard" M4, M5 or M12 in the off-season Elastic knitted p / w elastic band on the cuffs and waist for comfort Metal front "zipper" with an internal windproof valve The site presents a camouflage version of this jacket, which allows the use of false epaulettes Pockets: 2 capacious external pockets and 1 internal 1 with a zipper with a section for a fountain pen on the left sleeve Material: Twill (Twill) -100% polyester with PU coating Insulation: Sintepon 150 g/m 2 Product weight: 44-46/170-176 size -611 g 48-50/170-176 size -721 g 52-54/182-188 size -741 g from a glider soaring in the sky - you will not pass by this model. Flight jackets, which were supposed to combine functionality with simplicity, are reflected in this lightweight and practical urban jacket. The shortened demi-season jacket "Navigator" does not hinder movements and is convenient for a bicycle, scooter or motorcycle. The Navigator differs from the "Pilot" jacket only by the presence of a false collar. Thanks to the durable, water-repellent, wrinkle-resistant material (Twill (100% polyester with PU coating)) and synthetic insulation padding polyester (150 g/m 2), of which the jacket is made, the "Shturman" easily resists bad weather, is quickly cleaned and retains its original appearance for a long time. Elastic ribbing at the cuffs and waist provides soft yet secure wind protection. The powerful metal front zipper with internal wind flap inspires confidence. Volumetric side pockets will allow you to place everything you need and will not let your hands freeze, and for the absolute safety of valuable items, the jacket is complemented by two inner pockets and a pocket on the sleeve. Monochromatic jackets are recommended in the set for the summer uniform "Guard" in the off-season. On the camouflage version, you can use false epaulettes. We strongly recommend using front loading washing machines, but if you have a top loading washing machine, it is recommended to wash your clothes and equipment in a special mesh laundry bag to protect against possible damage from parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Attention! The price of the jacket is indicated without the cost of the edge. You can order the trim separately. A warm yet lightweight Alaskan down jacket for harsh winters. Features Loose fit that does not restrict movement membrane tissue top with windproof and "breathable" properties natural fur convenient hood adjustment system (top flap, occipital and facial ties made of elastic cord with locks) shoulder pads made of synthetic insulation high warm collar trimmed with Polartec ® profiled sleeves fabric into the zipper a special strap protects the face from contact with the top edge of the zipper six external convenient pockets hidden zipped pockets under the outer placket and on the right sleeve four inner pockets warm cuffs made of Polartec ® with holes for under thumb Windproof skirt Waist tie with elastic cord with stoppers Specifications Outer fabric: Nylon Supplex Inner fabric: Advance® Classic Insulation: goose down Weight, g.: 1960 Insulation weight, g.: 470 Insulation type: natural Temperature range, C °: -30 Technology seams: simple Quantity of internal pockets, pcs.: 4 Quantity of external pockets, pcs.: 6 Windproof skirt Zipper type: two-lock Hood: fixed Water resistance, mm. water column: 3000 Vapor permeability, gr.m.kv / 24 hours: 3000 Membrane: Nylon Supplex ® Volumetric cut of the elbow zone Fill Power indicator (for down products): 670

On camouflage jackets, you can use false epaulettes. sleeve Material: Top material 45-P Shadow Alpha Industries - Splav: 100% nylon Twill (Twill) -100% polyester with PU coating 611 g 48-50/170-176 size -721 g 52-54/182-188 size -741 g Additional discounts do not apply to products with a red price loading, but if you are the owner of a top-loading machine, it is recommended to wash clothes and equipment in a special mesh laundry bag to protect against possible damage by parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

The jacket is oversized! If you wear 50 r you need to take 48 !!! Jacket from a winter field suit for servicemen of the Armed Forces of the Russian Federation of the sample of 2010. It differs from the original in external wind and moisture protection fabric, lightweight non-removable insulation and a more convenient central fastener. External fabric - Oxford PU (100% nylon). Unlike the mixed fabric of the original, it does not get wet, protects from the wind and has high strength. Lightweight lining synthetic fabric Central fastener with a zipper, covered on the outside by a placket with buttons (buttons in the original). It protects better from cold and wind, it is more convenient to work even with warm gloves For simplicity and convenience, the insulation (synthetic winterizer) is made non-removable. The amount of insulation is less than in the original, the jacket is more demi-season for its intended purpose. Reinforcement of the elbows with overlays from the second layer of fabric. False epaulettes included High wide collar lined with fleece. It fastens with Velcro. The hood is insulated with a layer of fleece and stows away in the collar. Stretches around the face, and in two dimensions at the back of the head. Fastens at the front with Velcro Waist is tightened with an elastic cord with two clamps on the inside of the jacket. Slanted entry at a comfortable angle, fleece-lined inner document pocket with velcro flap (heart side), made of waterproof fabric washing clothes and equipment in a special mesh laundry bag to protect against possible damage by parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Classic warm women's down short coat for the city. Durable fabric-blend upper with DWR water-repellent treatment keeps out wind and snow and is stain-resistant The optimal balance of style, comfort and reliable protection from the cold, weight, strength and durability of this model make it an obvious choice as a practical everyday urban outerwear for the cold season. Semi-fitted cut allows you to look feminine and at the same time provides more than the necessary freedom of movement Four-layer construction (separate down package) eliminates the migration of down Length to the middle of the thigh Comfortable stitched warm hood with height and front adjustments Removable trim made of natural fur Warm high collar Central two-lock notched zipper Padded internal security placket Padded external placket with press studs Sleeves with warm inner cuffs Articulated elbow fit Pockets: Two warm side pockets with flaps with press studs, soft velor burlap One internal chest pocket with zip Material: Shell fabric: 84% polyester, 16 % cotton, 191 g/m2 Lining: 100% nylon 20D 36 g/m2 Insulation: Quality goose down FP600 Down weight: 44/158-164-181.4 g 50/158-164-221.0 g 54/ 164-170-246.1 g SIZE FINDING: Download Down production

Warm and durable Winter Jacket. The most popular model. The site presents a camouflage version of this jacket. False epaulettes can be used Quilted polyester lining with padding polyester, which increases the service life of clothes (padding stays in place when dry-cleaning or washing) Frontal zipper with two locks, unzips both at the top and bottom of the jacket Pleats on the back for extra freedom of movement Windproof valve that covers the front zipper, knitted cuffs inside the sleeves prevent the penetration of cold under clothing It is possible to complete the jacket with a hood, collar and liner Stainless buttons are used Pockets: 2 chest pockets and 2 at the bottom of the jacket 1 inner pocket Drawstrings: cord for tightening the belt and bottom of the jacket Material: Oxford ( Oxford) -100% nylon with PU coating "Tourist" -100% polyacryl with polyamide coating Insulation: Sintepon 300 g/m2

Warm and durable winter jacket. The most popular model. The site presents a single-color version of this jacket. False epaulettes can be used Quilted polyester lining with padding polyester, which increases the service life of clothes (padding stays in place when dry-cleaning or washing) Frontal zipper with two locks, unzips both at the top and bottom of the jacket Pleats on the back for extra freedom of movement Windproof valve , covering the front zipper, knitted cuffs inside the sleeves prevent the penetration of cold under clothing Stainless buttons are used It is possible to complete the jacket with a hood, collar and lining Pockets: 2 chest pockets, 2 at the bottom of the jacket and 1 inside Drawstrings: cord for tightening the belt and bottom of the jacket Material: Oxford ) -100% nylon with PU coating Insulation: Synthetic winterizer 300 g/m 2 SIZE FINDING: Download

Attack tactical gloves provide all-round protection of the hand from mechanical damage Properly placed dense polyurethane foam inserts effectively protect the thumb and back of the hand Reinforcements on the palm of genuine leather designed to improve grip and prevent slippage Neoprene cuff with Velcro strap securely fixes the glove on the wrist, preventing it from slipping Wear it in good health and new adventures for you! Material: Genuine Leather Neoprene

Warm jacket made of 100% nylon, perfectly protecting from wind and rain. The site presents a single-color version of this jacket. Loose fit that does not restrict movement False epaulettes can be used Polyester quilted lining together with synthetic winterizer, which increases the service life of clothing (synthetic winterizer remains in place during dry cleaning or washing) Front zipper with two locks, unfastens both from above and below the jacket front zipper; the bottom of the jacket and cuffs, adjustable in size with the help of additional buttons, prevent the penetration of cold under clothes Stainless buttons are used Pockets: 2 chest pockets and 1 under the radio station 2 pockets at the bottom of the jacket and 1 inside pocket Material: Oxford (Oxford) -100% nylon with PU coating Insulation: Synthetic winterizer 300 g/m 2 Additional discounts do not apply to products with a red price MAYBE YOU ARE INTERESTED IN: Warm, durable, windproof and waterproof, good for both service and recreation. Due to the free cut, it does not restrict movement and warms easily and easily, especially in combination with insulated trousers or semi-overalls. However, if you need more protection, you can always purchase a hood and/or fur collar in the accessories section. The jacket owes its properties to the Oxford fabric used in its manufacture (100% nylon with PU coating). The polyester lining is quilted along with it, which increases the life of the jacket (the padding polyester stays in place when dry-cleaning or washing). Unlike expensive membrane fabrics and down insulation, these materials do not require special personal care and do not raise the price of the jacket to exorbitant heights. We strongly recommend using front loading washing machines, but if you have a top loading washing machine, it is recommended to wash your clothes and equipment in a special mesh laundry bag to protect against possible damage from parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

A set of windproof smoke (jacket) and warm liner with Primaloft ® Black insulation, which can be worn separately as a stand-alone jacket Smoke: Can be worn with or without lining High and wide collar. A hood with a peak in which plastic is inserted to give a rigid form. The hood has three adjustments for a close fit Front zipper with two locks, unfastens both from above and below Windproof flap that covers the front zipper Velcro cuffs for smooth adjustment of the wrist girth Front flap and pockets are fastened with Canadian (on a tape leg) buttons , which have greater reliability compared to conventional buttons. Buttons are oversized for easy handling when wearing thick gloves Volumetric pockets on the torso have a fold-over entry to protect the contents from falling out Pockets: 2 volume pockets on the chest 2 volumetric pockets on the bottom of the jacket 2 Napoleon pockets with zippers on the chest One flat pocket on the left sleeve and one inside on the left with a zipper Drawstrings: at the waist and bottom of the jacket, with elastic cords to protect against the penetration of cold under clothing ) Fastening to the smoke and fastening when worn as a separate jacket, is done with the help of convenient lenticular buttons of the American sample Hood, adjustable according to the oval of the face. Hood interior lined with fleece for comfortable wear Underarm vents Knitted cuffs for comfort Inside left zip pocket 65% polyester Smoka lining: thin blend, 35% cotton, 65% polyester Main liner: 100% polyester Insulation: body - Primaloft ® Black 2×133 g/m 2 sleeves - Primaloft ® Black 2×80 g/m 2 Product weight: 46/176 size -1969 g 50/176 size -2097 g 54/182 size -2181 g 56-58/188 size -2439 g Also on the site are models of trousers with insulation Primaloft® YOU MAY BE INTERESTED IN: We strongly recommend front loading washing machines, if you own a top loading machine we recommend washing your clothes and equipment in a mesh laundry bag to protect against possible damage from parts of the washing machine drum . Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Classic model Can be used with epaulettes Worn outside Belt is adjustable in size with side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose Attention! On this moment There are two versions available: - with Velcro base (loops) for placing a chevron - without a base Please indicate the desired option when ordering.

Straight silhouette, length to the middle of the thigh Hood with a detachable trim, adjustable in volume and oval of the face Insulated with two layers of synthetic winterizer, which is 270 g/m or washing) Front zipper with two locks, unzips both from the top and bottom of the jacket Windproof inner and outer flaps that cover the front "zipper"; edging on the hood; high collar and bottom of the sleeves, adjustable in size with Velcro with an internal knitted cuff, prevent the penetration of cold under clothing two inside pockets four pockets at the bottom of the jacket Drawstrings: along the waist and bottom of the jacket Material: 100% Polyamide with PU coating Product weight: 46/176 size -1140 g 50/176 size -1207 g 54/182 size - 1302 g 58/188 size -1430 g Designed as a combat jacket, which meant serious checks and tests, having survived outbursts of popular worship and periods of cooling, it returned to us calm and confident in its reliability, functionality and durability. Warm, durable, windproof and water repellent, thanks to the fabric used in the manufacture (100% polyamide with PU coating), "Alaska" provides complete protection from snow, wind, moisture and cold. Insulation - two layers of synthetic fiber synthetic winterizer (270 g / m 2), which, unlike down, does not absorb moisture and is not afraid of frequent washing. The polyester lining is quilted along with it, which increases the life of the jacket (the padding polyester stays in place when dry-cleaning or washing). Unlike expensive membrane fabrics and down insulation, these materials do not require special personal care and do not raise the price of the jacket to exorbitant heights. The hood, characteristic of Alaska, with fur trim, in combination with a high collar, covers almost the entire face, if necessary, and is adjustable in volume and oval of the face. Edge made from natural or faux fur(of your choice) can be detached from the hood. The inside of the collar and the edge of the hood that touches the face are lined with soft fleece. Serious barriers to wind and cold are also wind-shelter external and internal valves of the frontal two-way zipper, belt and bottom of the jacket pulled down with a cord. Sleeves with internal knitted cuffs are regulated by armor on "flypaper". The length of the jacket (to the middle of the thigh) allows you to stay in the cold for a long time, and the free silhouette does not restrict movement. Large buttons allow you to unbutton the jacket without taking off your gloves. Volumetric, warm front pockets are trimmed inside with soft knitted fabric , and large buttons on the upper pockets allow you to unbutton them with gloves. In addition to the six front pockets, there are two more pockets on the sleeve and two inside. Warm comfortable jacket designed for long stays in the cold. We strongly recommend using front loading washing machines, but if you have a top loading washing machine, it is recommended to wash your clothes and equipment in a special mesh laundry bag to protect against possible damage from parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.

Lightweight and durable tactical gloves Reinforced palms for added protection High-density polyurethane foam inserts effectively protect the bones of the first phalanx and the back of the hand Strap with Velcro fastener to secure the wrist Material: Genuine leather Tactical gloves are an absolute must-have for people dealing with cold weather or small arms. They protect hands from pinching mechanisms of small arms, cuts and bruises. Tactical knives are most often designed to fit tactical gloves. Thanks to open fingers, hands do not lose sensitivity and can perform the most subtle manipulations. Following the military, tactical gloves fell in love with tourists and extreme sportsmen. Drivers of SUVs, motorcycles, quads and bicycles, hikers, adventure racers and orienteers get lightweight and reliable hand protection in their face, allowing you to leave excessive caution and focus on the route. Semi-gloves "Storm" are made of genuine leather. On the palm of the hand, soft inserts for protection of the hand and better cushioning. The back of the hand and the knuckles of the first phalanx of the fingers are reliably protected by high-density polyurethane inserts.

The jacket is insulated, designed to be worn in the cold season. Stainless buttons are used. The front zipper is covered with a wind-shelter valve with buttons. The bottom of the sleeves and the belt are tightened with an elastic band. : 100% polyester Insulation: Sintepon 230 g/m 2 Discounts do not apply to this model! YOU MAY BE INTERESTED IN: We strongly recommend using front loading washing machines, but if you own a top loading machine, it is recommended to wash your clothes and equipment in a special mesh laundry bag to protect against possible damage from parts of the washing machine drum. Close all zippers and velcro fasteners and fully loosen all adjustments before washing. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash on a delicate cycle at 30°C with a double rinse cycle (it is better to use two rinse cycles to ensure that all detergent residues are removed from the fabric and insulation) and spin at medium speed. It is acceptable to use a tumble dryer at medium temperature (40-60°C) for 30-40 minutes or until completely dry, if the top fabric is membrane, it is better to dry the product with the lining out (turned inside out). You can dry the product in a suspended state with the lining out. For stubborn stains, before washing, treat stains with a special product such as Grangers Performance Wash or Nikwax Tech Wash, allowing the detergent to soak in for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore the DWR treatment on insulated clothing or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not forever. During the operation of the product, as well as after a certain number of washes, the effectiveness of DWR decreases. If water droplets have stopped rolling off the surface of the fabric and wet the fabric even after washing, it's time to restore the splash-proof treatment. We recommend the use of specific fabric re-spray formulations, either sprayed or poured into the washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First wash the product according to the washing instructions, then use the selected composition to restore the splash protection by spraying it directly on the front of the product while it is still damp, or by running the second wash cycle, first pouring the required amount of wash-in into the washing machine . The manufacturer's instructions for the restoration of the splashproof treatment on the packaging must be followed exactly. Many DWR reconditioning products require heat activation, so it is best to dry treated clothing and equipment in a tumble dryer or oven at medium temperature (40-60°C) for 40-50 minutes or until completely dry.