Stencils of snowflakes from paper for cutting. We decorate the house with paper snowflakes (templates for cutting)

Irina

During my childhood, we made paper snowflakes in a completely different way - I personally saw the templates for cutting out only a couple of years ago. And looked at them as if spellbound. Well, is it really possible to cut a snowflake out of paper so beautifully using such a template? Carved edges, the thinnest curls - and then with ordinary scissors made of thick paper folded in twelve layers?!

Of course, I doubted not in vain. It turned out that not every Nice picture capable of becoming an equally beautiful reality. I have no doubt - there are true masters of paper snow lace, but personally I am not able to cut edges less than a centimeter thick - the hand with scissors jumps off and I make a fatal cut in the wrong place. Everything, the snowflake over which you puffed for half an hour, is hopelessly spoiled. And on New Year's Eve, every minute counts! Here you will find templates for adults with an average level of development fine motor skills. I promise you will enjoy. I personally cut out each pattern. So great! If you don’t need to explain how to use the templates, skip further explanations and go straight to the section where you can download templates for cutting paper snowflakes and print them completely free - in A4 format.

Again, I would like to involve children in the process, requiring without fail to do paper crafts with them on New Year 2017 DIY. Snowflakes - why not a craft? Especially if they turn out spectacular and neat. Of course, very little peanuts can’t cope with the template, so for them we fold the paper blank six times, hand over the scissors and, having given plenty of shredding the paper, as God puts it on our souls, we sit down to teach the kids to make neat corners, triangles and similar circles around the edges. Then we go on a creative flight. But for children 5-6 years old, templates for cutting snowflakes out of paper with thick, one and a half to two centimeters lines are already on the shoulder. For the first experience, we have selected the most suitable pattern. Here the paper folds six times, so no special effort is required. Plus, all the lines are straight - so failures are practically excluded. 20 minutes with the help of a small children's team you can make a whole paper "snowdrift", which is enough to cover the entire apartment with snowflakes, and at the same time the stairwell.

How to make a paper snowflake according to a cutting template?

Click on the "Print" link and you will download the template in A4 format (pdf file). Print it out on a regular black and white printer. Fold the paper along the dotted lines so that the paper snowflake template design is facing you. Cut out the snowflake along the lines with sharp scissors. That's all you need to do.

There are 20 cutting templates in total. paper snowflakes. I have sorted them by difficulty. Determined by experience. In the process, my scissors became dull - even metal scissors are not easy to cut through sheets of ordinary office paper folded 12 times. Part of the snowflake templates is made in such a way that you need to fold the paper 6 times. And cutting them is much easier. But some thin openwork patterns, of course, need to be done with big amount additions. And it is better to try to look for thinner paper. Although if you print patterns for snowflakes on a printer, then it can chew the tracing paper.

Now I will lay out the templates in turn. From the simplest to the most complex. Choose which one you like best.

The easiest patterns for cutting paper snowflakes

A simple classic snowflake of a fairly large size. All cut lines are straight, there are no broken corners, no thin elements, the paper folds six times, so it is easy to work with scissors. A first grader is quite capable of cutting such a snowflake.

I cut this snowflake faster than all the others. Straight short lines, sixfold addition, classic style. A child of 5-6 years old will cope. And most importantly - if you need to quickly decorate the room with paper snowflakes, you can cut tens of five of these in an hour in two hands.

The simplest template of all offered. Short lines, all cutouts are angles or triangles, no parallel lines. You can entrust cutting to a preschooler.

Here, too, there is nothing complicated, except that you need to carefully walk with scissors along arcs with pointed ends. You can cut in about a minute.

Medium difficulty snowflake templates

A good snowflake template for adults (and also suitable for middle schoolers), who have never made a “snowy” decor. It does not require any special diligence or a long time, while it turns out to be very spectacular in appearance.

A simple and quick template for those who know how to cut wavy lines with scissors. Due to the large central cutout, it does not hold its shape very well on its own.

At first I wanted to refer this snowflake to the first section, where the simplest ones are collected, but nevertheless, in practice, it turned out that curly semicircular cutouts in oriental style requires some skill due to parallel lines.

The technique for carving this snowflake is very similar to the one we were taught in kindergarten. Small cutouts on the sides, more - to the edges. In principle, to create such snowflakes, templates are not even required.

This snowflake was invented by some artist and posted for free use for everyone.

Hearts are a trendy theme for girls 5-6 years old. Adults will have to cut it out - in the heart itself, accuracy is needed to maintain the parallelism of the contours.

The openwork snowflake is still from the section of simple patterns - it all consists of simple contours and corner cutouts. It does not wrinkle when cutting, it can be handled even with not very sharp scissors. It takes two minutes. A great option if you want something beautiful, but at the same time there is no desire to make an effort.

Here the difficulty is only in cutting out thin brackets in the center of each face. Some precision and care is required. It is necessary to fold the snowflake blank as accurately as possible so that they all turn out to be approximately the same in appearance.

Here, quite thin strips of paper remain, so if you start cutting it, for example, from below, then the petals will move apart. So start at the top, then work your way down, cutting out both the inner patterns and the sides of the edges, and trim the center at the very end. Looks quite unusual.

This snowflake seems very simple, but in fact there are certain difficulties with cutting out thin stripes. They cut well along, but diligence must be exercised to neatly trim the short perpendiculars. Paper gets stuck, sometimes you have to lay out a snowflake to cut those places where it does not want to separate.

This snowflake is more difficult than the previous one, because you need good eyesight and strong hands to cut through thin cascades in paper folded 12 times.

Patterns for cutting openwork snowflakes (difficult, but feasible)

If you want to decorate your house with highly artistic paper snowflakes, but have never tried to cut them out, then this option with butterflies is the most suitable for the first experience. I got it right the first time. And while some of the details below are slightly asymmetrical, the intricate pattern draws attention away from the imperfection of the workmanship.

Actual snow pattern with small Christmas trees. I spent five minutes with her. Be sure to fold as precisely as possible, start cutting from the top edges, going down. Not the most convenient template, but quite capable of coping.

This snowflake unexpectedly turned out to be one of the most difficult. Thin edges strove to open up, I had to put them together, as a result, the center did not work out. I didn't go for the ideal. I think it will be more interesting to see what can happen the first time.

Well, here is the most complex template from our collection. I think already appearance everything immediately becomes clear. I couldn’t cope with it with ordinary scissors - what you see in the photo, I cut out with very sharp scissors for metal. But it turned out beautifully, I do not argue. Small errors do not spoil openwork pattern. It's hard to straighten it out. And then it is advisable to put it under the press or in a book so that the antennae and curls do not stick out in different directions.

Add recipe
To favorites

Good snowy day, friends. Why snowy? Today your warm windless houses will be filled with bewitching snowflakes. Precipitation indoors is unlikely, I will just reveal the secrets of creating various "ice" crystals. The methods are suitable even for those who failed to pacify the scissors during school lessons labor. Follow the tips, then do-it-yourself angular sloppy paper snowflakes will become sophisticated ornate works of art.

For a graceful carved craft, you will need 3 simple ingredients: sheets, sharp scissors, plus fantasy. The rules here are observed only when preparing the base, and the pattern can be absolutely anything: Christmas trees, stars, monograms, hearts, rhombuses, intricate lines.

I tell you how to cut snowflakes out of paper with your own hands in stages:

To a beginner, the scheme will seem complicated, confusing. But the principle of work will definitely come during the process, you just have to take a sheet and make 1-2 correct blanks. short practice - The best way figure out how to cut snowflakes out of paper with your own hands in stages.

The folded "semi-finished product" must be filled with a pattern. It is drawn in advance with a pencil or improvised - each craft will turn out to be unique. The cuts at the base correspond to the edges of the finished product, at the top of the triangle - to the middle, on the sides - to the "body".

Keep in mind: the sheet has been folded several times, all the notches made will be mirrored, duplicated in each segment of the circle.

Simple schemes for beautiful paper snowflakes

Is fantasy letting you down? Creative skills cause distrust? Use existing cutting patterns to create crafts. Snowflakes are created along lines kindly built by other people. The drawings are printed as a whole or redrawn on a folded triangle and unnecessary segments are cut off.

There are a lot of options for schemes. The surface of the improvised "icicles" is filled with abstract patterns, flowers, figures of people, animals, cartoons, fairy-tale heroes. Here are the easiest guides.

"Herringbone"

From the top to the middle of the base, draw a straight line 0.2-0.5 cm wide, focus on the size of the sheet. On both sides, draw several equidistant segments to the "equator" at an angle of 30 °. The resulting series of strips must be cut through one. Leave the vertical line intact, otherwise the product will fall apart in two.

"Angels"

A more complicated option, but the availability of the necessary scheme is the question “How to cut snowflakes out of paper with your own hands in stages?” removes instantly. Draw the outlines of 1-3 angels, if desired, complete the pattern with lines. Cut off unnecessary material. When you go around the contour of the figure, leave thin paper "bridges" - the character must stay on the body of the craft.

"Monogram"

Monogram "icicles" are amazing with a minimum of effort. The pattern is repeated throughout the product, it seems too intricate, difficult for a person to perform. Take the diagram, fill in the blank with any monograms you like or a lot of intertwined lines. It remains only to get rid of excess material and unfold the sheet.

See what other results you can achieve with. The process of creating products corresponds to simple principles - we translate the drawing, we use scissors. The result looks like a real frosty miracle.

Cut out beautiful paper snowflakes according to the schemes: 3 tips

My beautiful paper snowflakes did not start to turn out right away, at first I had to ruin several dozen sheets and sacrifice pride. Through countless trials and errors, a list of rules for creating crafts appeared. I use it when I plan to surprise others with the ability to control scissors, and I advise you to follow the points.

1. Choose the right material. For crafts that are attached to windows, walls, it is better to take thin sheets. You can stop at notebooks, tracing paper, napkins. For hanging products, office paper, craft, whatman paper is suitable. The materials are thicker and hold their shape well. Only cutting them is more difficult, the tool will need a strong, sharp one.
2. Spend more time on the product. The drawing doesn't have to be complicated. The main thing here is a lot of matching lines, notches. The more, the more complex the pattern seems, even if you cut through a dozen of the same stripes, like the Herringbone.
3. Find scissors with a thin blade. The graceful tip of the tool will allow you to remove small dots, stripes - the craft will only benefit. Some consider nail scissors to be ideal, but they will not take thick paper. Look for tools to suit your needs.

Volumetric paper snowflakes

Volumetric crafts are less sophisticated than carved counterparts, but they look more attractive as a decoration of the space. Didn’t understand how to cut snowflakes out of paper with your own hands in stages? Try to master the options below.

"Fan"

The creation of the "Fan" can be entrusted to a child or a person far from creativity.

1. Take some sheets. The more of them, the denser the craft will turn out.
2. Position one vertically in front of you.
3. Draw the sheet with horizontal equidistant stripes - optimally after 1-3 cm.
4. Change the length of the indent - the final look of the product will be different from the previous ones.
5. Next, fold the base with an accordion: bend the first strip to the left, the second to the right, the third to the left again - and to the end.
6. Squeeze the accordion, fold it in half vertically. Glue the adjacent sides.
7. Create several parts, connect to each other. Unusually beautiful paper snowflakes will turn out - a kind of pleated skirt.

"Flower"

The voluminous craft is ready, it remains only to hang it up. Manipulations in the process of creating the "Flower" are simple and understandable, the result is incredibly beautiful.

Are you going to fill the interior with a winter fairy tale? Simple creativity is still worth mastering. For me, the creation of "crystals" - great way relax, unwind. Successful snowflakes make the fantasy work harder, come up with more and more intricate patterns, and tools make it more skillful to bend around thin lines. Try to captivate with household chores, New Year's mood, you are provided with comfort.

See you soon, share your successes and subscribe to blog updates in anticipation of new creative ideas.

Decorating your home for the holidays is not an easy task, but nothing is easier if you figure out how to make a snowflake out of paper - such decor looks attractive and has been relevant for many years. Moreover, you can make not just ordinary flat decorations, but also voluminous ones. By the way, they can be used in interior design, holiday table or even decorate a Christmas tree with them.

Traditional garlands made of paper leaves have been cut out for several generations, this is the most popular type of decor. It is best to get the whole family together and do this activity - so you can have a good time and make snowflakes with your own hands - with different designs.

Traditional decorations are obtained by folding the sheet six times - you can see the patterns of snowflakes. However, if you want to get a more sophisticated decor, you should not dwell on the classic options, it is quite possible to fold the leaf any number of times - so the snowflakes for the new year will turn out to be diverse.

What you need in order to make paper snowflakes yourself:

• paper - plain office white paper is suitable, as well as an album for children's creativity. Particularly dense varieties like watercolor should not be taken - such a blank will not be very easy to bend and cut.
• craft knife and stationery scissors - directly for cutting. If you plan to make paper snowflakes with your kids, make sure they have scissors with rounded ends.
• pencil and eraser - for marking and patterning on the workpiece.

Several ways to create

How to make a beautiful paper snowflake if you have never done it before? You can go through trial and error if you have enough time and enthusiasm. Fold the sheet in any way convenient for you, and then pick up scissors or a clerical knife.

This video shows 3 ways to fold paper to cut out snowflakes:

draw a pattern and cut it out correctly:

If you do not mind bending, then you can use nail scissors. First of all, you need to make a beautiful edge for your future snowflake - you can simply cut it with a smooth line, cut out ice crystals or even a few cloves. It all depends on your imagination.

Then you need to cut through the main decorative elements - they can be abstract or quite logical - for example, the herringbone pattern looks beautiful. After you cut out the main elements, add small ones - it is more convenient to make them with a clerical knife (you can put the blank for this on a special paper cutting mat or on a pile of old newspapers or magazines - this will help save the table).

Then the workpiece needs to be smoothed out. A few attempts will help you navigate and decide on the design.

If you do not understand how to fold paper, then you can use the most in a simple way- fold the paper sheet in half, then again - a rhombus will come out. Fold it again to make a triangle - the corner where the most folds will be central part, and the free sides - the edge. You can look at addition schemes to get elements with any number of rays.

A colored paper snowflake looks impressive - especially if it is double-sided colored paper with glitter effect. By the way, the finished snowflake can be decorated with decorative glitter glue.

Try folding paper for a snowflake according to one of the patterns and cut something of your choice, and if you don’t like the result, you can always print beautiful scheme and make snowflakes with your own hands from paper or blanks.

How to cut big beautiful snowflakes?

Download large paper cut snowflake patterns or check out beautiful snowflake stencils.

More volume

If you want to understand how to make a three-dimensional paper snowflake, then you first need to define the terms. Volumetric can be either an ordinary form, which was folded after cutting and fixed in such a way that it turns out to be corrugated, and a structure that is made of several elements.

The most spectacular look are beautiful huge snowflakes (larger than an A4 sheet), which are assembled from several fragments. Do big snowflake without an assembly diagram it is very difficult, you need to have good spatial thinking. To understand how to make each element and figure out how a three-dimensional structure is obtained from it, it is better to watch a short and understandable master class.

Best volumetric snowflakes do-it-yourself foil and paper are obtained when you follow inspiration and at the same time look at the working assembly scheme.

Do you want to figure out how to cut paper snowflakes with an unusual design in the form of Einstein's head or with symbols from the Game of Thrones? You will need snowflake templates to cut out - follow the instructions and you will get exactly the same result as in the image.

If you are confident in your own abilities, then you can try to draw your own stencils for cutting - first we fold the sheet as many times as necessary, then on one side we draw a drawing of what should be the result and cut it out.

With such decorative elements you can decorate an apartment or Christmas tree, and they can also be used at a party - of course, if it is in the spirit of a popular fandom. However, you can go the other way and not print the finished design, but study step by step wizard class and figure out how a folded triangle of paper turns into familiar symbols and faces.

Try cutting paper snowflakes using the cutout templates.

Unusual voluminous paper snowflakes can be made in another way - for example, using the quilling technique. You will need strips from which you will twist the spirals and glue them together.

Take advantage ready idea with a photo or video, or come up with something of your own. To make voluminous beautiful snowflakes from colored paper with your own hands - look step by step lessons and you will learn to do unusual snowflakes from paper and colored foil looking at patterns for cutting.

However, if you like to cut, you have a good knife for paper cutting, then you can do fan snowflakes with your own hands. This is a complex structure with interesting design, which is assembled from several layers - like a children's pyramid. Each layer consists of sheets of paper folded like a fan, on which fancy patterns are cut.

Here's what a large voluminous snowflake can be made from two sheets of paper folded like a fan:

A paper fan made in this way is glued with three or four of the same fans - this will be the largest circle. By the way, you can make it quite dense, without a large number openwork elements, or take sheets of blue or blue color- subsequent layers will shine through and the product will really glow with blue light.

The next paper circle is also made from fans, but already smaller, you can change the depth of the fold and pick up an interesting pattern. This is how several layers are made in stages - do not do too much, 3-6 layers will be enough.

To assemble a snow globe, you will need a drawing - you can print it out or come up with it yourself based on the master class. All that is required for this product is to figure out how many elements you will assemble your ball from, and how you will fasten the elements together (the easiest way is to glue them), and then prepare a template for one such element.

Now you can cut christmas snowflakes and can even bring a little winter decoration and comfort to your home even in the hottest summer.

Paper for cutting snowflakes can be taken office, colored paper for children's creativity, origami paper.

It is convenient to cut out relatively large sections of the pattern with ordinary stationery scissors, for example, along the edge of a snowflake.

For cutting small details and complex patterns, it is better to use hairdressing scissors and nail scissors.

DIY snowflakes

So, paper and scissors are selected, now you can proceed to the first stage of making snowflakes - folding paper. To get a hexagonal blank from which a snowflake will subsequently be made, cut a square of the desired size from a sheet of paper.

How to get squares of different sizes from an A4 sheet

1. Fold a sheet of paper in an arbitrary way, but so that one part is larger than the other, and then cut along the marked line.

2. Fold most of the sheet along the bisector.

3. Cut off the excess paper - you get a square.

4. The blank for the big snowflake is ready.

5. Repeat steps 2-3 with the smaller part of the sheet remaining after step 1.

6. The result is a blank for the average snowflake.

7. With the trim remaining after step 6, repeat steps 2-3.

8. It turned out a blank for a small snowflake. Thus, from one sheet of A4 format, you can make blanks for three snowflakes different size.

Piece sizes may vary slightly. They depend on how the original sheet was folded in step 1. In addition, a large snowflake can be obtained by cutting a square from a whole A4 sheet.

How to fold a hexagonal blank from a square

Now we need to fold a regular triangle from the square (in expanded form - a hexagon), from which a snowflake will be cut.

Method number 1

1. Fold the square in half.

2. Then fold the sheet "by eye" so that the angles indicated in diagram 3 are equal.

3. Turn the workpiece over to the other side.

4. The fold should go along the edge of the workpiece folded in step 2 of the layer, and the top edge should coincide with the left fold.

5. Cut off the excess paper evenly.

Method number 2

1. Fold the square diagonally.

2. Mark the middle of the leg of the resulting triangle (side).

3. Connect the top (right angle) of the triangle with the intended midpoint of the leg. Mark the fold line and again expand the workpiece to a triangle.

4. Now mark the middle of the base of the triangle.

5. Connect the middle of the leg with a point lying on the marking line obtained in step 3. The fold line should pass through the middle of the base of the triangle.

6. Connect the base of the triangle to the fold line obtained in step 5.

7. Cut off excess paper along the indicated line.

Advice

Choose the size of the hexagonal blank (large, small or medium) yourself based on the paper you use for cutting, the complexity of the snowflake, and your scissor skills.

Cut out the snowflake

1. Fold the regular triangle (unfolded hexagon) obtained by one of the methods proposed above in half. Perform all actions very accurately so that later you do not cut through the layers of paper folded crookedly with scissors. Make sure that the top circled in a circle (see diagram) is in the center of the future snowflake.

2. Start cutting. In the diagrams, areas of paper that need to be removed are indicated in bright pink. First form the outer edge of the snowflake. To do this, cut out the pattern on the top side of the workpiece, as shown in the diagram.

3. Then cut out the pattern on both sides of the workpiece. The last to cut out small elements inside the workpiece and near an acute angle.

4. The snowflake is ready, it remains only to carefully unfold it.

We will cut out all the presented snowflakes according to this description, starting from point 2, when the regular triangle is already folded in half. The fact is that all snowflakes are cut out in the same way, only the pattern changes, so we did not repeat the description of the work many times, but limited ourselves to exact diagrams.

The process of making each snowflake consists of 3-5 sequential schemes, on which the removed sections of paper are marked in black. The last diagram, which shows a snowflake fully cut out but not yet unfolded, is also a template. You can “by eye” draw a pattern from it onto your workpiece or transfer it using tracing paper and carbon paper.

Advice

The snowflake should look like a graphic image with a well-read pattern, so follow all stages of work very carefully and accurately.

Snowflakes. Scheme

Such snowflakes will be beautiful New Year's interior decoration .

More snowflake options

Snowflake. Step by step manufacturing process

Take a rectangular sheet of white paper and, following the instructions, cut out a snowflake from it. Fantasy, invent your own patterns, and you will get the most unusual and beautiful snowflake!

Good afternoon dear friends. New Year's Eve chores will begin very soon and you will need to have time to do great amount affairs. From decorating windows with paper snowflakes to decorating an apartment for the New Year. Also, do not forget that you will need to choose a gift or gifts for each family member, and even about the fact that you will need to prepare a lot, I am generally silent about this, since this is a special expense item. Do not forget to write for the holiday outside.

And of course, everyone wants to decorate their home in such a way that it would be the best and most beautiful on the street or in the entrance. And this dear friends can be done without much cost. You can decorate your windows with paper snowflakes and not spend almost a penny on it. Below in the article you can find a variety of patterns for cutting paper snowflakes.

Even if you don't have a printer to print these patterns, you can hold a sheet of paper to the screen and trace the pattern with a pencil.

Making paper snowflakes is a very fun family activity as the whole family can take part in decorating. When we were kids, we had competitions to see who would have the prettiest snowflake.

In order to cut a snowflake you will need

1 sheet of A4 paper
Scissors

Cutting steps

We take a simple sheet of paper. The photo shows the diagonals along which we will fold the sheet.

Carefully fold the sheet and cut along line B.

After you cut it off, you have such a triangle in your hands. Fold it in half exactly.

Now we divide the resulting triangle with two lines into three more triangles. You can fold on the "eye", but it is better to use a ruler.

Let's wrap one side first. Then another.

Here's what happened in the end. You need to cut off the bottom part to get an even source for cutting out the snowflake.

Well, now you can start cutting out the snowflake the way you want. The top of the triangle will be the middle of the snowflake. For now, try and fantasize without templates. You can cut whatever comes to your mind.

Here's what I got as a result of my first experiments.

The cut out snowflake is not yet very ready, as the fold lines are clearly visible. To avoid this, you need to straighten these lines with an iron.

Now your snowflake is even, beautiful and completely ready. Do not be afraid to experiment and you will definitely succeed.

Stencils (templates) of snowflakes for printing

Below I attach a large selection of stencils for printing on a printer. You will need to save the picture to your computer, and then print the image you like on the printer. It will also be possible to simply circle the image with a pencil by attaching a piece of paper to the screen.

Pictures of Christmas snowflakes for printing

Here's another big selection snowflake stencils that can also be glued to windows. In order to cut a snowflake according to these stencils, you also need to save and print any picture. Then fold the printed image in half and cut out the object along the contour. If you want to involve children in this business, then it is better to choose simpler schemes. so that the kids will definitely succeed.

Volumetric snowflakes on the windows for the New Year 2020

You can also decorate your windows with beautiful volumetric snowflakes. It will not be difficult to do this if you follow our detailed instructions. I propose to make just such a beautiful two-tone winter beauty. To do this, you will need two sheets of colored paper, scissors and glue.

And so we take the first sheet of blue color and make a square out of it. We bend it as shown in the photo below.

The resulting triangle is bent in the middle.

We do everything exactly as if the edges are not even, the snowflake will not turn out beautiful.

This is what it looks like from the top.

Pick up the upper part of the common fold with your fingers and connect to the side where there are three folds. You should get a triangle with a long acute angle.

Trim the folded triangle at an angle to the right. Here is what should happen in the end.

Now we take the workpiece in our hands so that we have the fold line on the left, and the side with three additions on the right.

And we make very thin cuts from the addition side. The thinner the cuts, the fluffier the snowflake will turn out.

We make cuts almost to the very end to get such a blank of the second level.

Carefully unfold the workpiece. And look how beautiful we have already turned out, but this is not the end.

Now you need to take a white sheet of paper, bend it into a triangle with sides of 15 cm, since the first snowflake was cut out of a triangle with sides of 20 cm.

Just like we cut out the first snowflake, we cut out the second one. We also bend the square into a triangle.

And we make the same small incisions.

After we unfold the blank, we already have two snowflakes of different colors in front of us.

It remains to make one more blue snowflake, but with sides of a triangle of 10 cm.

As a result, when we have three snowflakes of different sizes. From which it will be possible to collect one beautiful and voluminous snowflake.

The second can be done with a different alternation of colors.

As you can see, making such a snowflake is not at all difficult. I think that even a child will cope with such a task.

Video on how to make voluminous snowflakes to decorate windows

You can try to make such decorations for the New Year's interior. The video describes in detail step by step how beautiful voluminous snowflakes are made.