How to choose quality shoes. How to choose the right shoes

Poor-quality shoes or boots that don't fit well and that press when walking lead to blisters and deformities of the feet. The main advice on how to choose quality shoes, concerns the rejection of beautiful and uncomfortable couples. You are buying shoes, not a vase, so comfort should come first. And after that, aesthetics.

It is better to shop in specialized shoe stores of well-known brands. Here you will not be looked at suspiciously if you stare at the last of your boot for more than 5 minutes, and they will not dissuade you from bending the sole. Why? Consultants know their range will stand the test of strength.

· Sample is required. Before choosing high-quality shoes, try them on. Walk around the gym and make sure that the pair fits the size: snugly fits the leg, but does not press.

· Everything should be natural. Upper, lining, insole. Ideal materials are leather and suede. They absorb moisture and protect the skin from irritation.

· Casual shoes are comfortable shoes. Nothing will distract you in the office and on the subway during rush hour, if you prefer a stable heel or a solid sole to high stilettos. The optimal lifting height is 2–4 cm.

· Orthopedic insoles. Arch support in shoes will save the foot from deformation and relieve stress. Since you care about your health, choose shoes with orthopedic insoles, it is they who are considered to be of high quality.

Lacquer, nubuck, suede, leather - let's talk about materials

For any season, the best material is genuine leather. It does not block access to oxygen and does not interfere with natural heat transfer. The foot feels comfortable and does not sweat.

The skin can be smooth and patent, as well as with a pile. The latter type includes natural suede, velor, nubuck. Patent leather shoes do not allow air to pass through, so they are not suitable for summer. Another drawback of glossy leather is susceptibility to mechanical damage and temperature changes (it cracks when the thermometer drops to -10 and rises above +25 degrees). Since we choose high-quality shoes for a certain season, these points should be taken into account.

Capricious and suede. It treats scratches and scuffs easier, but removing dust and dirt is difficult, even when using a special rubber brush. Nubuck and velor also greasy and wear out over time, but better resist moisture. To prevent your nubuck boots and boots from getting wet, treat them with a moisture repellent before going out.

Choosing shoes for the season

Summer

Don't choose for summer patent leather shoes, since they do not pass air well, this does not mean that the shoes are of less quality, this is logical for your comfort. Gloss is best left for publication. For weekdays, open sandals (female version), moccasins and brogues (male) made of genuine leather or textiles are appropriate.

Spring-autumn

Boots and boots for the off-season should not let water through. This means that if zippers are provided in them, the latter ideally reach the sole. Speaking of soles. The thicker it is, the better - this is the only way you will find yourself above the puddles, and not in them. Make sure there are a few millimeters between the boot and the foot. These are not sandals or sandals to be worn on bare feet.

Winter

How to choose high-quality winter shoes? Here, as in the case of the spring-autumn season, the sole is important. It should be thick (at least 1.5–2 cm) and ribbed. The relief on the tread prevents slipping, which means injury on ice.

The next step is the lining. Boots and boots with natural sheep fur or zigeyka will protect against colds and flu. Remember the rule to keep your feet warm?

We look for defects and reject poor quality

· Smooth/rough inner surface. Seams and joints are flat. Nails and fasteners are not felt through the insoles. Otherwise, you have a marriage that will rub your feet.

· Rolled/open edges. If the heel is sewn in one piece, it is genuine leather. Since choosing quality shoes is your task, discard a product in which the seams are carefully hidden. Manufacturers disguise leatherette for accuracy.

· Flexible/solid outsole. The sole of the right shoes, shoes and boots is flexible. It should bend easily and not crack. The exception is models on wedges and platforms.

· Correct/incorrect heel. If you put a pair on a flat surface, it is stable. The sock, turned up 1.5–2 cm up, compensates for the rise. The heel is located under the heel and does not move back when you press the insole. The absence of at least one feature does not speak in favor of the estimated pair.

· Straight/irregular seams. Since when choosing high-quality shoes, you rate them on a number of parameters, do not forget about the line. It should be straight, without defects, with a stitch length of 2-3 mm. If the stitch is less than 2 mm, the effect of perforation is triggered when worn, which threatens the divergence of the boot at the seams.

We have given a solid list of parameters by which products are evaluated. We hope you find them useful when you decide to buy. winter boots or walking shoes.

Sports boots

What winter shoes do athletes choose? Of course, sports. The answer is obvious. In addition, boots of this type are optimally suited for everyday style. Modern technologies, synthetic compounds that make boots light and warm at the same time - these are the main advantages of living in sport style.

Overview of women's winter models

Warm and practical, yet fashionable - new items for the winter of 2016-2017 meet these criteria.

Practical boots

Insulated waterproof Women's shoes with thick soles - a must-have for the Russian winter. They cover the ankle to keep out the snow and are paired with wide flat heels. You can wear shoes with leggings and skinny jeans in an ensemble with an elongated sweater and a matching scarf. For outerwear, the best option is a parka.

Classic boots

How to choose winter shoes that will go with a skirt + jacket or dress set? Opt for boots. This season, models with wide straight tops are relevant. Heel - low or its complete absence. In fashion collections, the ratio is 50 to 50.

You can combine boots with pencil skirts and other models of a classic cut. Dark dresses above the knee and plain coats look good. It is better to prefer leggings to match the jeans, which will visually lengthen the legs.

Fashion sneakers

A fashionable novelty of recent seasons is sporty chic. So active ladies can safely choose sneakers. In winter, they are combined with absolutely everything that goes beyond the office dress code. This includes jeans, leggings, maxi skirts. In the latter case, you will get a grunge look. Ideal outerwear - sport jacket, parka or oversized coat.

We hope that our tips will help you find the perfect pair for every occasion, whether it's a regular work day, a friendly one.

Rubs, crushes and falls apart before our eyes due to the physical "conflict" with the foot. Usually, first the shoes win and the person walks in calluses, and then the foot starts to win - and the shoes fall apart. The good news is there is a way to deal with this.

What do you need to know about the foot?

Everyone's feet are different sizes and shapes. But two key characteristics are important to us now, length and width. The size of the foot is determined by its length. The width is usually not indicated separately anywhere, although the feet, with the same length, can differ in width by 1.5 times. Here, for example, is a photo from Wikipedia with just such a case.

To buy proper shoes, you need to measure its length and width in advance and in the right way and remember these numbers forever in centimeters. You need to measure in a flattened state. Neither on weight, nor on some kind of insole old shoes, no imprint of paint.

Take 2 sheets of paper (to make the foot fit completely, you can glue several sheets together or staple them together), put them on the floor and stand on the sheet with each foot in turn. Your goal is to circle the foot at the moment when the weight of the whole body is on it. It is this form that the foot takes when it receives a load when walking. And it is in this position that she and the shoes cause each other the greatest mutual damage. You can measure your foot with a sock if you always wear socks.

Step on the sheet and trace around the perimeter of each leg individually with a pen so that the sheet has a full projection of the foot. Do not dip the handle under the foot, but do not lean outward either. Be sure to circle both legs to find out at the same time whether they are symmetrical or not.

After the correct stroke, the drawing needs to be measured correctly. Imagine that you want to place your foot in rectangular box, the walls of which are adjacent to all sides of the foot. Draw a rectangle around the circled foot and measure its long side. This will be your foot size in centimeters, which, according to the manufacturer's size charts, can be translated into shoe size.

What you need to know about dimensional grids shoe manufacturers?

They are different for everyone and the grid spacing is also different. The same foot length may have different sizes from different manufacturers. If you want to buy shoes from a specific brand, like Convers or Vans, you can look into their mesh specifically.

Comparing these grids, you can see that 26 cm for Converses will fall between sizes 8 and 8.5, while Wens will clearly be a size 8.

Remembering what Russian, Italian, English or Chinese size you have is pointless. It’s easier to immediately remember in centimeters and then either correlate it yourself, or torture consultants. If you have legs different sizes- shoes are selected according to the larger foot.

After the age of 30, legs should be measured approximately every 5 years. May increase by 0.5 - 1 size. Especially if there is proskostopia.

Now let's move on to the width of the foot.

The width is usually not indicated in any way. Some manufacturers have shoes of different thicknesses, they are also labeled differently, there are no world standards. But the fullness of the foot is not always the width, it can simply be an increased volume of the boot, but not in breadth, but upwards. Therefore, here it is necessary to analyze visually. (Although if you buy shoes from a single manufacturer, you can remember its markings.)

Here on this one, a. There are 218 pairs for a narrow foot, only 15 for the widest one. Well, if you look at the photos, you can see that somewhere for a full foot wide shoes are offered, and somewhere just with a large volume, apparently for a high rise.

Measure the width of the narrow edge of your rectangle. Write down, compare the feet and remember this width. If you remember that your flattened foot is 10 cm wide, it will be easier for you to understand if the boot will fit, even just by holding it in your hand. If you have feet different widths- shoes are selected according to the larger foot. (Orthopedists, by the way, measure all this differently, but they have completely different tasks there)

The third point is the shape of your fingers.

The toes are usually the most troubled parts of the foot. As you can see, their forms are very different, but there is no intelligible measurement. Well, except perhaps for such a picture, which, it seems to me, has nothing to do with reality).

Here you need to remember the shape of your fingers and love it with all your heart. When you love something, you start to "find" it in space automatically. On the shelves and in the photographs, you will instantly catch your eye on shoes with the same sock shape. See what different toes the shoes have, maybe one of them follows the curve of your foot?

So, you are now familiar with the most important characteristics of your foot (but not all, by the way). And now we can move on to shoes.

What you need to know about shoes

Shoes are sewn not just like that, but according to certain blocks. And if you have a lot of money - it's best to order shoes tailoring for your feet. But if there is no such possibility, we will study the materiel.

To choose shoes that will “conflict” with the foot the least, you need to understand two points for yourself:

1. how hard / soft shoes to change on the foot


2. how close the manufacturer's last is in shape to your foot

The softer the shoe, the more it can deform and take the shape of the foot. But here you need to understand that the possibilities of shoes are not unlimited, and if your foot stretches something very much, this something will die as quickly as possible. Here are the boot options. The first is made of soft, non-glued leather. The second of the rigid, glued. The more molded the shoes, the more carefully you will need to select the shape. And the softer - the more small discrepancies can be allowed. But you need to understand that the more these mismatches, the faster the shoes will wear out and acquire not beautiful creases. (In the pictures, shoes for a narrow foot)

And the most difficult moment is the correlation of your foot shape with the shape of the manufacturer's shoe.

Here you will need to turn on the imagination, the eye, and sometimes take the ruler. We look at the boot from above (or from the side of the sole) and try to imagine how our foot will enter there. Here on these examples I show how the thought should move. Here, using the example of my feet, it is clear that no matter what soft sneakers are (which, by the way, are with increased fullness!), The foot will not be comfortable there, because when loaded, they will strongly rest against the side parts. Such shoes can not even be tried on.

But in this example, everything is ok. Almost nothing will stretch or crush.

With boots, you need to think in a similar way, but choose even more carefully. Here, for example, a boot for a narrow foot and for a wide one. Everyone understands that if you try to stuff a wide foot into this narrow boot, the nose will be completely empty, the boot will stretch in breadth and the nose will start to lift up from this?

Wide-footed people usually suffer from corns on their little fingers, they have to take shoes a size larger, wear them in, stretch them. The foot seems to hang over the sole on the sides.

If your foot is narrow, you will have another problem. In length, the shoes are already back to back, the finger hurts, but it continues to slosh. Narrow-footed people usually suffer from choosing a smaller size, and then they rub their heels or fingers. The laces are tightened as much as possible, not beautiful voids and creases are formed on the molded shoes, which can press when walking.

But if you choose shoes according to these principles, most of the problems can be avoided.

Countries and shoe widths, is there any dependence?

It is generally accepted that southern shoes (for example, Italian) are usually sewn on a narrow foot, and northern shoes (for example, German and Finnish) on a wide one (and Chinese shoes run small by at least 2 sizes :)). Such a dependence does exist, but not in 100% of cases. If a company sends a collection to a certain market (for example, Russian), then it can specifically select certain lasts. Or maybe not choose. Each individual case needs to be looked at with the eyes.

In Russia, we have about half of the men with ordinary, normal feet, and half with wide and very wide (for women, by the way, this is also the case). There are fewer narrow feet. The figures are very approximate, I focus on my experience and on the comment of a Japanese shoemaker who studied Russian feet in order to enter our market. In Italy, according to rumors, normal and narrow feet predominate. Perhaps this will answer the silent question of our consumers "why such narrow shoes are sold everywhere." Yes, they just bought it in a bunch at the base, brought it and sell it.

In Russia itself, different shoes are produced, but usually for increased fullness. So the owners of wide feet can also look at local factories.

And a few words about men's shopping.

Men like to wear shoes to holes, then come to the store in them, immediately change shoes and throw out the old one. But it's better not to do that.

1. If you have a difficult long-suffering foot, give yourself more time to choose. Look for pictures on websites (almost all popular brands are on wildberry and they are photographed from above), walk around the store longer.

2. After buying shoes, you have 2 weeks to return them without giving reasons if you have not worn them. That is, it means that you can try everything on at home, walk around the apartment for a couple of hours and see how your legs will feel. And if any inconveniences are found, you take it back to the store in a box and with a check (do not forget to take your passport with you).

Now you know how to improve your shoe selection skills. Will you use it? Are you going to look at the legs and look at the shoes? What is your foot? What tricks did you find when choosing for yourself?

And so, having learned what materials shoes should be made of that meet all the requirements of comfort and hygiene, let's determine how to choose high-quality shoes, and also move on to the issues of hidden defects when buying.

What are quality shoes made from?

In 90% of cases, good and high-quality shoes are made from the skin of the following three animals: calf (bull), pig and goat. The remaining 10% are exclusive and exotic shoes. The most durable calfskin is suitable for the most severe weather conditions. Its thickness is 1.8 - 2.5 mm. Possible faults include the presence on the skin of many small defects from insect bites and the like. Pigskin is cheaper than calfskin, has a greater distribution, and is thinner. The disadvantages include high hygroscopicity and loss of shape when wet frequently. You can choose this material for non-critical elements in the product, such as lining, insoles, bootlegs and all kinds of applications. The most thin skin(0.8 - 1.5 mm) - goat skin, - at the same time the most beautiful with a minimum number of defects. High-quality model women's shoes are often made from it. When choosing such shoes, you need to understand that such shoes are not very durable and reliable, but they are great for non-critical elements.

Skin types and their features

Now let's talk about skin types and their features. Genuine leather can be smooth, patent, may have pile (suede, velor, nubuck). Patent shoes poorly breathable, so it is not recommended to wear in hot weather and with excessive sweating of the feet. In addition, it is very susceptible to mechanical damage (scratches, etc.) and cracks at temperatures below -10 degrees C or above 25 degrees C, and from dampness it becomes covered with small cracks. Suede is not afraid of small bumps and scratches, but it is difficult to remove dust and dirt from it even with a special brush. Nubuck is even less protected from dirt and greasy than suede and velor, but more moisture resistant. In general, shoes made of suede, nubuck and velor are quite capricious, requiring constant care with water-repellent agents due to their high hygroscopicity.

When buying shoes made of nubuck and velor, be sure to take care of buying paint suitable color. Only paint will be able to paint over quickly formed and poorly removed scuffs and traces of dirt.

Possible defects in shoes

Pay attention to the inner surface of the selected pair of shoes. The inner surface of high-quality shoes should be even, smooth to the touch at the joints, otherwise tights and socks will constantly tear on the sharp edges of the seams, etc.

Take a close look at the heel of your chosen shoe. The heel can be decorated not with the usual straight vertical seam, but with a sewn-on one-piece piece. Such a detail can be either a consignment note, and then its cut is clearly visible, or have the edges of the seams tucked inward. If you find the heel part in just such designs (turned inside), then in this case the likelihood that the shoes are not made of genuine leather increases significantly. By turning the edges inward, manufacturers of cheap low-quality shoes may be trying to hide the true material and avoid questions from overly meticulous buyers. On the other hand, very high-quality shoes of well-known brands are also often produced with turned-in edges. Therefore, if you do not have a world-famous brand of shoes in front of you, and you are not in a company store, then the selected edges should be alarming. In addition, the presence of an open cut in the product will help determine the thickness of the skin, which is an important factor in intensive wear.

Now consider the heel on the selected product. Place your shoes on a flat surface. When viewed from the side, a pair of high-quality shoes should stand steadily, on the entire surface of the heels, otherwise they may loosen and break the arch support. The heel can be either solid-cast from plastic, rubber, metal or wood, or prefabricated - from 2 or more materials. Plastic is fragile, wood rots from moisture. A metal rod is inserted inside thin plastic heels (studs) to reinforce the structure. The worse the quality of the metal, the softer it is, the more likely the heel will break. The second reason for a broken stud on low-quality shoes or boots is that the metal rod is not inserted for the entire length of the heel. Heels, as well as other parts, tend to scratch. You can tint them in repair shops. At home, you can try to tint with a waterproof marker. Choosing a color for a black heel will not be a problem, but choosing other shades can present certain difficulties even in repair shops. This must be taken into account when buying shoes with non-black heels.

It doesn't hurt to check the back seams on your chosen pair as well. They should be even, sewn with stitches of 2-3 mm. If the stitch is smaller, then when worn, the effect of perforation is triggered and tearing is possible, which, of course, is not a sign of quality.

It will not be an exaggeration to say that your health, and sometimes life, depends on whether you know how to choose winter shoes. Frost, slush, ice, reagents that are generously sprinkled on the roads - all these are real tests for boots and boots, and not every pair will cope with them. Therefore, to feel warm and comfortable, choose shoes responsibly. To help you, we've put together some top picking tips. winter shoes.

Upper materials

The answer to the question of how to choose high-quality shoes for winter lies primarily in right choice the material from which its top is sewn. Despite the development of technology, the shelves of most stores are still divided into two parts: more expensive shoes from natural materials and budget options from artificial. Genuine Leather it can be smooth and fleecy - this variety includes suede, velor, nubuck, beloved by many. Consider the pros and cons of each type of shoe.

Smooth natural leather holds heat well, restores its shape after deformation, endures low temperatures, repels moisture, and prevents the foot from sweating. In addition, natural leather is able to adapt to the shape of your foot when worn, so it is more comfortable.

Shaggy types of leather - suede, velor or nubuck - have most of these properties. The only exception is that they allow moisture to pass through and, moreover, under the influence of water and dirt, they can lose a neat appearance. Salvation can be special sprays, but they cannot be called a panacea. Therefore, in bad weather It is better not to wear such shoes. But it has a beautiful appearance and is suitable for holiday exits.

Modern industry has invented hundreds of synthetic materials for making shoes, but no matter how good they are, they cannot keep up with genuine leather in quality. Leatherette shoes are less durable - as a rule, they last for one season. It is not as warm and less comfortable. The biggest plus of shoes made from non-natural materials is the low price.

Shoes should be placed in a separate category sports type. Synthetic materials and heaters like foam rubber are often used for it. As a rule, they do a good job of maintaining heat. But to wear such shoes with business-style clothes, you see, will not work.

How to choose quality shoes

1. To determine whether natural or faux leather shoes are made, gently touch it with a needle. Genuine leather will bend elastically, and then restore its shape, a puncture mark will remain on the fake one.
2. Examine the pair carefully and find places where you can see the wrong side of the material. If a fabric base is found there, it is leatherette.
3. Evaluate the quality of the seams - the manufacturer of good shoes will not save on its processing.
4. Examine the heel counter adjacent to the heel - it should be firm, but pliable to hold the foot. From the inside, it should be covered with a bike or leather. It is pointless to make the backdrop furry - the pile will be wiped off instantly.
5. The sole should be firmly and neatly fastened - without smudges of glue or knocked down protruding threads if the shoes are stitched.

Interior decoration

It is clear that one of the best options for interior decoration of winter shoes - natural fur. It perfectly maintains heat and does not allow the foot to sweat. In addition, it does not fall off for a long time, which means that an air gap is preserved between its villi, thanks to which the leg does not freeze.

To distinguish natural from artificial insulation, you need to push the villi and examine the base of the lining. If you see a fabric base there, then the insulation is not natural.

Please note that often manufacturers use different linings for the top and bottom of shoes. In hard-to-reach places adjacent to the foot, low-quality material may suddenly appear.

The insoles of winter shoes should be soft enough. Well, if they have a Seitz roller - a special thickening under the forefoot.

Sole

The minimum thickness of the sole for winter shoes is one centimeter. Keep in mind that the thinner it is, the sooner the leg will cool. The best materials are polyurethane, rubber, polyvinyl chloride. A good "grip" to the surface provides a corrugated pattern, but sometimes it is not enough. If the shoes turned out to be slippery, you can ask the workshop to glue special linings on them. However, this will require additional costs.

Heel

Modern doctors are gradually moving away from the idea that comfortable and safe shoes must have a heel. We will not interfere in the discussions of orthopedists and note only one thing: high-heeled winter boots are not an option for every day, and you need to move in them as carefully as possible.

A more or less safe heel height for hiking on snow and ice is up to five centimeters. At the same time, it is better that the heel is wide and stable.

Make sure that under load the heel does not move back, and the toe, even without your weight, does not rise more than one centimeter above the floor. If these requirements are not met, it will be very difficult for you to stay on your feet in ice, and in general it will be uncomfortable.

Lightning

Immediately appreciate how neatly and competently the zipper is sewn. On the inside, a valve should adjoin to it, which will allow you not to tear your socks and tights when fastening and not damage the zipper itself. At the same time, it should not reach the bottom of the shoe, otherwise water will constantly get inside through the fastener.

How to choose the size of winter shoes

1. Come to the shoe store in the afternoon when your feet are already a little swollen.
2. If you plan to wear shoes with a sock, put it on immediately when you try it on.
3. Put on new shoes and measure how far from the edge of the shoe your big toe is. Experts say that it is optimal if it is one centimeter. In any case, make sure that all your fingers are not squeezed inside, and they can crack. In places where shoes constrain the foot, in winter there is a great danger of frostbite.
4. Leather shoes should sit comfortably, but at the same time fit snugly around the foot (recall that leather is able to take the shape of your foot over time).
5. Keep in mind that leather shoes if it is broken in, then only in width. If your thumb it is not free in it when trying on, even a long sock will not change anything - it will always be so.

1. Shoes made of genuine smooth leather with a heel no more than five centimeters are the most practical and safe.
2. Assessing the material from which the lining is made, examine not only the top, but also the part where the foot is placed directly. Manufacturers often skimp on the inconspicuous parts of their products.
3. Press down on the instep of the boot in the middle - the heel should not move back.
4. Winter shoes should not be tight - in places where they will squeeze the leg, you risk getting frostbite.
5. The sole of high-quality winter shoes cannot be thinner than one centimeter.

When choosing clothes and shoes, be sure to pay attention to the manufacturer. This will directly affect the convenience, quality of materials and the price of the item. After all, you agree that best shoes is it something you don't feel on your foot while walking? Buying a low-quality thing, you doom yourself to permanent corns, corns, curvature and the like. Below we will determine how to choose the right brand for men and women. women's shoes, and make a rating of the best manufacturers for 2017.

How to choose the right shoes?

A properly selected pair of shoes (sneakers, sneakers, ballet flats, louboutins, moccasins, underline the option you need) prevents the appearance of growths, corns and similar muck. Inappropriate shoes can rapidly develop these same diseases that will constantly remind of themselves (according to my own bitter experience).

Let's take care of our feet and choose comfortable shoes for them. So, here are a few key rules that will help you avoid foot problems:

1. Go shopping in the late afternoon, when your foot has time to trample and increase in size a little.

2. During the first fitting, be sure to make a few circles around the store, and carefully "listen" to your feelings.

3. Be sure to take the insoles with you (if you wear special orthopedic or shoe inserts).

4. Don't pay attention to shoe size (within reason, of course). Many manufacturers may run small or large. Therefore, it often happens that your 38 size may fit 36 ​​or 40.

5. Do you order from an online store? Then take measurements of the foot immediately before buying. Foot size changes throughout life, so if you measured the size once at the age of 18, this is not an indicator.

Coming home, we recommend to give your feet freedom. Walk barefoot (if there are no diseases that prevent it), or buy light fabric slippers. After a hard day at work, it will be the perfect soothing for your fingers and feet.

Rating of the best brands of men's shoes

Do you want to experience the beauty of life? Then choose shoes that have stood the test of time. Below we present to your attention the brands of men's shoes, which, in our opinion, are the best.

1. Caterpillar - stylish and practical

This brand mainly produces boots and low shoes in a classic, sporty and casual style. You can find not only male models but also female. On this moment, the Caterpillar boot brand is only gaining popularity in the CIS countries. But already, judging by the numerous customer reviews, it is one of the most reliable manufacturers in terms of quality.

The price of boots can be said to be average (in the region of 5000 - 6000 thousand rubles). Can be easily picked suitable model for winter, spring, summer and autumn. The rubber sole keeps well in any weather, does not peel off. In general, this Best offer on the market at the moment.

Pros:

• Affordable shoes (not too expensive).
• Very high quality, can be worn for years.

Minuses:

• Not revealed (although there is a marriage everywhere).

2. Nike - sport and comfort

Probably one of the most popular companies in the production of sneakers and sneakers. Interesting fact A: In 2016, Nike became the most popular brand in the world. And this is not only a merit of good marketers in the state. Nike produces some of the highest quality and most stylish models to date. You probably won't find one young man or a girl who would not like to buy AirMax for herself.

The price for one pair of shoes is very different, starting from 650 rubles and ending with an incredible 30,000 rubles. The quality of each model is excellent. The sole and upper materials are well combined, and withstand any load. Thus, it is very good shoes for daily wear and sports.

Pros:

• Price. You can find a budget model.
• High quality materials.
• Wide range for women and men
• Good for sports (running, basketball).

Minuses:

• Thick sole that not everyone likes.

3. ECCO - Absolute Confidence

ECCO is popular with men all over the world. Great quality, innovative technologies and stylish design make ecco products one of the most sought after in the world. In the store you will find shoes for all occasions: sneakers, shoes, sandals, flip flops and boots.

The price of products of this brand, of course, bite a little. The price for most models starts from 7000 rubles. However, the store is constantly running discounts and promotions that allow you to buy some models at a much lower price. In general, this is a good manufacturer of shoes for stylish men.

Pros:

• High quality products.
• Wide range for men and women.
• There are always discounts and promotions.

Minuses:

• The price is great.

4. Ralf Ringer - European quality

Ralf Ringer has been on the market for quite some time (since 1996). Previously, shoes were produced only for men, now you can find a wide range of shoes for women and children. Shoes are designed for people from 20 to 45 years old. The main advantage of this brand is high European quality.

The average price for one pair varies from 2000 to 7000 rubles. It's a pretty reasonable price for the quality. Customer reviews of the product are mostly positive. This is not strange, because shoes from Ralf Ringer can serve you for more than one year.

Pros:

• Comfortable shoes for men and women.
• Relatively inexpensive in price.
• High European quality.

Minuses:

• Some models are not very well made.

The best women's shoe manufacturers

As a rule, women choose any elements of clothing very carefully. This also applies to shoes, sandals, sandals, loafers and the like. If you want to always look stylish, and at the same time not worry that the shoes will tear, then we recommend that you pay attention to the rating. best brands in 2017 for women.

1. Geox - start breathing

Italian manufacturer of women's and men's shoes, which has established itself as a quality brand. Geox specialize in the production of classic, everyday and casual models. The company is famous for its relationship with customers, as it strives to satisfy all their needs as much as possible. IN Lately, the manufacturer uses its own development of the sole membrane. It allows the foot to breathe while walking, and does not let moisture in from the outside.

The cost of production starts from 3,000 rubles and can reach up to 100,000 rubles. Depending on the needs and season, you can always find the right Geox model in the store. In general, user reviews are mostly positive.

Pros:

• There are collections for men, women and children.
• The sole allows the skin of the feet to breathe.
• Do not pass moisture.

Minuses:

• High price.

2. Rieker - comfort from Germany

Popular brand from Germany. They are mainly famous for their quality in casual shoes. You can be sure that it will last you several seasons without problems. On the other hand, it is better to choose more carefully for places where the climate is changeable. Judging by customer reviews, Rieker does not tolerate bad weather conditions.

The price for a pair, in principle, is average (around 5000 rubles). For this price you will get a pair of shoes or boots made of quality materials. The assortment of the brand is quite large, you can pick up shoes not only for a woman, but also for a man and your children.

Pros:

• A wide range of.
• Comfortable to wear.
• Sufficiently durable models.

Minuses:

• Poorly withstand severe frosts.

3. Bronx - good shoes as a tradition

Dutch manufacturer, which managed to spread in many countries. Due to the presentation of goods in different price categories, their products are used a large number of of people. Every year you can watch up to 4 Bronx fashion collections.

The price of the product can vary greatly depending on the selected model. For budget buyers, there is a collection called DIBA. Bronx products can be freely purchased on the territory of the CIS countries.

Pros:

• There are budget and expensive collections.
• The high quality of the materials used.

Minuses:

• Not detected.

4. Clarks - exquisite and tasteful

Clarks offers us a wide range of winter and summer shoes. For the production of shoes and sandals, only the most quality materials. You can find a suitable pair not only for women, but also for men.

Most buyers note the fact that the sandals are very comfortable and durable. The price, of course, is slightly higher than average, but this is a small price to pay for comfort and sophistication.

Pros:

• Comfortable and durable.
• Quality materials are used.