Kanzashi pillow for rings. DIY wedding pillows for rings (photo)

Marriage is a responsible and serious event that requires you to carefully prepare and think through every detail. The ring pillow is just one of those for a wedding. And sewing it, it turns out, is not only easy, but even interesting.

We make a delicate pillow for rings for a wedding using the kanzashi technique

The kanzashi technique is the most popular for making such wonderful pillows. You only need a little patience to be able to master this subtle art.

Materials: a piece of red fabric measuring 35x20 cm, threads, a white mesh, cotton wool, an adhesive gun, tweezers, a knife, a lighter, a burgundy five-centimeter satin ribbon, as well as white and green with a width of 4 cm.

Step by step description of the work progress:

1) Sew the fabric on three sides. Stuff with cotton, and loosely, otherwise there is a risk that the rings will roll off the pad. Stitch the last side.

2) With a white ribbon, leaving 2 cm clothespins every 4 cm, sheathe the edges. For convenience and greater strength, you can first fasten with pins, and then lay the stitches.

3) Make a figure eight out of another piece of tape and sew it into the corner part. Paste the grid into the remaining space.

4) Now the rosette itself. To create it, cut a wide burgundy ribbon into 50 squares of 5 cm each.

5) Bend the square diagonally so that you get a triangle. Next, wrap its edge so that the corner is in the center of the bottom. Do the same with the second one.

6) To get a rose petal, you need to cut off the base, solder the layers and form something like this:

7) Twist the petal and make a bud out of it. Next, glue the rest in a spiral so that they look even, and the middle does not bulge or fall out. And yet, the reverse side of the rose should be glued evenly and in the same plane.

8) Now it's the turn of the leaves. Cut out pieces of ribbon that are shaped like the original leaves on a rose. After that, you need to singe them and bend them more often with your fingers about every 2 cm. Thus, the leaves should become more voluminous.

9) Now you need to warm up the knife and make veins. Then glue the leaves and narrower ribbons, forming a composition. Sew on a rose. Make a depression in the middle with your fingers for future rings. Ready!

Let's make a pillow in white colors with interesting accessories

Another option interesting accessory made by hand.

You make a pattern from two identical squares 10x10 cm plus 2 cm allowances. Fold the cut out elements and attach them along the edges to sewing machine, except for one, leaving a hole in it for stuffing with filler. Make cuts on the corners, turn them inside out with a wooden stick and straighten them.

Put a filler inside, for example, cotton wool or synthetic winterizer. And sew with a secret stitch. The base is ready.

And also, so as not to take a new thread each time, after fixing the bead, insert the needle inside the pillow and bring it out at the place where the new one is fixed. For decor, use roses and twigs from satin or organza, which can be purchased ready-made or made using the above technique. Next, tie a bow from a satin ribbon, secure it with a few stitches, and place a bead in the center. That's all!

Let's make a pillow for presenting rings with a wedding date

Very elegant and useful pillow-calendar with your memorable day.

For manufacturing you will need:

Laser printer, A4 sheet, pins, two pieces of coarse calico 17x17 cm and 23x32 cm, needles for embroidery and sewing, cotton lace 70 cm long, scissors, 70 cm narrow tape from satin, a simple pencil, red and white threads, chalk, 1 cm of glue gossamer, tape measure, synthetic fluff.

Execution algorithm:

1. Build a workpiece. To do this, put a cobweb between a paper sheet and a piece of calico. Iron evenly.
2. Cut off excess fabric, focusing on the outline.
3. Print the required calendar page on the front side. In order not to wrinkle the material, you need to purchase a loose fabric on a natural basis.
4. Attach the completed blank to the second side of the pad and cut along the contour.
5. For reliability, it is better to iron it well again.
6. Pin the lace along the perimeter of the product 2–3 cm from the edge and sew it on a typewriter. And the remaining corner on the inner and outer sidewall is sewn by hand.
7. Bend the lace on the front side inward and pin with pins. Sew on a typewriter, retreating from the edge 1-1.5 cm and leaving one side untouched for the future filler.
8. Trim excess fabric, remove pins, insert sintepuh.
9. Embroider a heart or circle around the desired date. It remains only to manually sew the remaining gap.

And for dessert, especially for you, a photo of another no less beautiful work:

Video tutorials for beginners

Welcome to the section where you can learn something new from the experience of other bridal pillow makers. Good luck with your work and enjoy watching!

Wedding. How much of this word. The bride is tender and sophisticated. Already in childhood, we ask ourselves the question: how will my wedding go? I want the celebration to be held at a high level, so that only bright and good memories remain.

Preparation is a responsibility. The celebration should take place in the same style. You must not miss a single detail. Not the last role is played by accessories for the wedding. You will be offered many options for adding to your wedding, so many stores are open. Do not forget about such an accessory as a pillow for rings.

The exchange of rings is the first gift of newlyweds to each other. The ring symbolizes infinity, it is a symbol eternal love and it is very important that only positive memories of this symbol be. A pillow for wedding rings will perfectly help in this matter. Imagine: a few more minutes and the bride and groom will exchange rings, new family. The rings will lie on a pillow or tray.

If you decide to buy an accessory in the store, then you will be provided with a wide variety of models: round, square, with rhinestones, without rhinestones, with bright ribbons and made in a certain style. You can make a pillow for the rings yourself, it's not so difficult. A cute handmade wedding pillow will cause more approval from others. Can the purchased pillow express individuality? Of course not. In the future, you will look at this accessory and remember how much time and effort you have invested in this product.

The main thing is to choose right size and the style in which the product will be made. The ring pad should be small so that you can see the rings. You will need various decorative elements - beads, rhinestones, satin ribbons, pebbles, lace. Choose decor in any accessory store.

So you have decided for yourself that you will make the pillow yourself, now it's time to decide what shape your ring pillow will be, what will decorate it and how it can differ from the rest.

What are the types of pillows

1) Pillow for rings - a heart. A cute bow will be an addition to the pillow. You can choose any fabric, but satin and velvet in the color of the product are most suitable.

2) These can be products of various shapes: a circle, a square, an oval or the same rectangle. good decorations will serve: lace, beads, ribbons, beads and pearls. You can embroider the first letters of the names of the newlyweds.

3) Pillows with the image of things and objects. This option can be chosen if the theme of your wedding matches the idea that you want to implement.

4) Product with your joint photo. To do this, select a photo and print. The photo must be of a certain size and color.

5) Pillows on which vows given to each other are embroidered. Oaths can be written in different languages, in different fonts and colors.

6) Pillow for rings with the date of the wedding. Example: calendar and highlighted date.

7) Wedding pillows made of fresh flowers look very nice and cute. Wedding pillows for rings from natural flowers. Choose fresh flowers and, most importantly, that you and your soulmate are not allergic to this composition.

8)Themed pillows

- Trips. An example is a ring pad with a machine.

– Pillow in vintage style. All kinds of brooches, ribbons and small beads will help you here. Looks elegant and sophisticated.

- Marine theme. The predominance of green, blue, light green colors.

- Eco - pillows. Natural ingredients are an important component of such products.

- Your favorite book will become an original pillow for rings. The main thing is to give the right meaning.

- Confirmation of the fact that beauty is in simplicity, will be a pillow made in the Provence style.

- Unusual pillows will please the eye and surprise with their design.

You can see even more ring pads by watching this video.

If you still decide that making a pillow for rings with your own hands is not at all a problem for you, then a master class is offered to your attention.

Master class on creating pillows for rings with your own hands ( With step by step photos)

You will need:

- Textile. Satin and velvet are best. The size is approximately 30 by 25 cm.

– Satin ribbons: pink (30cm); 2 white ribbons (25 cm, 24 cm); green ribbon (all shades of green) 0.5 cm -1.5 cm; and white - 0.5 cm;

- Sintepon;

- Paper, pencil, scissors, needles.

- Beads. Choose any color.

Let's see how to make a DIY wedding ring pillow.

First of all, you will take paper and draw a sketch (we have this heart). The size and shape are up to you. The sample made on the fabric, circle 2 times on the reverse side.

1.5 - 2 cm of fabric needs to be made for seam allowances!

After you have outlined the sketch, you begin to embroider the stems: fasten the ribbon with a knot and bring it to the wrong side. The ribbon will need to be twisted, and then laid according to the pattern that has been circled. The tape is fixed with hand stitches (they are not visible), threads and needles will help you with this. Then bring out the needle with the tape (reverse side). The stems remain.

Straighten the heart, gently straighten the seams. For best results, iron through a damp cloth. This does not apply to stems.

Satin ribbons are folded in half, and the fold will need to be ironed. Cut the edges at a 45 degree angle. Lay the line yourself with a “needle forward” seam (along the edge). Rules for execution: bring the needle and thread to the straight side; stringing beads; stitch back; bring the needle forward, in front of the sewn bead (approximately 3 - 4 mm distance); then the next beads are strung.

The advice is this: try to melt the cut edges of the ribbons in a flame.

Let's start shaping the flowers. From any edge, pull the thread with which the tape is sewn along the length. The assemblies are made in a flower - form folds and fix them by sewing with a needle and thread. After that, the flowers are sewn to the stems (with beads along the edge of the heart). Make a loop of thread with beads. The beads are sewn with such a seam as a “back needle”.

A white satin ribbon is sewn to where the stems join.

The last step is to tie the ribbon on which the ring is put on into a bow.

Work is done. We get such a cute wedding pillow for rings.

You can buy a pillow or make your own. The main thing is that you like this pillow for rings! It will be a great addition to your wedding rings. Initially, it will seem to you that it is difficult and easier to do this just to go and buy a finished product, but you can do it with your own hands much more and more interesting. Years will pass, you will get this product and be transported to that day that completely changed your life.

I present to you one of best master- classes on making pillows for rings with your own hands. Enjoy watching!

Wedding accessories are charming details that create and complete a single image of this most important celebration in life. The decor of the festive hall, glasses and cutlery, the design of the place where the ceremony itself takes place - all this should be designed in a single style that matches the thematic direction of the wedding. Of course, one should not forget about such pleasant little things as a pillow for rings, because this detail is of particular importance in the wedding whirlwind. So, it is customary to photograph the rings of the spouses on a delicate and exquisite pillow, in addition, it pleases the eye during the ceremony.

Carrying out rings on a beautiful pillow is rather a Western tradition, since in Russian registry offices, newlyweds remove the symbols of their marriage bonds from a special saucer, which is issued by an employee of the institution. This tradition is common in Slavic countries. The pads are more suitable for an outdoor ceremony, which is common in the USA and Europe, from where the idea came to us to use special soft holders for wedding rings. Sometimes a child can take out rings on a pillow (), bringing an additional touch of tenderness to the ceremony.

Wedding pillows are on sale in all specialized salons today. They can be made in the same spirit with the dress and details of the groom's suit - this adds elegance and sophistication to the decor. Often, a pillow is ordered from a handmade decor master or from special firms that produce custom-made wedding accessories. This product is sewn mainly from expensive fabrics of all shades of white, less often - other colors. Brocade, satin ribbons, lace, natural silk, jewelry made of beads, pearls and organza. Decorate the accessory with embroidery, and rhinestones, and twigs, and fresh flowers.

The rings on the pad are usually attached to delicate bow or one of the satin ribbons, which creates charming image, favorably appearing in professional photographs. During registration, the spouses or the registry office employee pull the ribbon, and the rings are carefully released. This little ritual makes the wedding even more touching.

Ring pad size

If the pillow is made in the classic square version, its size should be no more than 15x15 cm. More often do 10×10 cm.

It is important not to exceed these dimensions so that the rings do not get lost in the decor and remain the main characters of this composition. Pillows in the shape of a circle, heart, flower, etc. should be about the same size. Sometimes they make large pillows - almost the size of a sofa, but they no longer look so gentle and touching.

Cushion for wedding rings: design options

Pillows decorated with retro lace and artificial flowers look original. Some weddings use a shaped stand big flower gerbera or chamomile, the core of which is a bed for rings.

If wedding decorations far from classic white and pink colors, since Provencal, rustic or vintage style is chosen for the decoration of the celebration, you can sew a pillow from thin burlap and decorate it with colored ribbons or lace. This is a very popular design today. On such pillows, the date of the wedding and the names of the newlyweds are often embroidered, or even a drawing of the calendar is applied.

Wedding pillows for wedding rings can be given a variety of looks: a heart, a flower, a bird's nest, a shell, a basket with a handle, a flower bed, etc. This product can be sewn in the form of a round Turkish “dumka” with drapery and a button in the center. In general, the brides and grooms do not hold fantasies.

Here's another idea: put a pillow for rings in a book with a “hiding place” cut out especially for it. A solid volume is placed before the bride and groom. They open the cover - and there are rings. The book, of course, should be about love. How else?

By the way, the pillow is not always accompanied by ties. Sometimes a recess is made in the center of the product so that the rings do not roll. Ties in this case are optional. Another option is ribbon loops through which the ring is threaded. And one more solution - large beads like ring holders.

IN Lately when the fashion for handmade is gaining momentum, many brides are interested in the question,. If you approach the matter with love and accuracy, it will turn out no worse than that of a professional or an experienced craftswoman. We bring to your attention one of the options for self-manufacturing pillows for rings.

Do-it-yourself pillow for rings: a step-by-step master class with a photo

In this master class, we will sew a very simple wedding pillow for wedding rings. The manufacture of this accessory does not require much effort and cost. It can even be sewn by hand, and not on a sewing machine.

We will need the following materials for sewing a wedding accessory:

• white satin fabric;
• white lace;
• white double-sided satin ribbon measuring 1x50 cm;
• white double-sided satin ribbon measuring 0.5x30 cm;
• pink satin ribbon measuring 0.5x30 cm;
• white threads;
• synthetic winterizer;
• needle;
• scissors;
• pencil;
• cardboard;
• ruler;
• lighter or candle;
• ear pins.

From cardboard we cut out a template measuring 10x10 cm. This size will be our pillow as a result. Fold the fabric in half so that the front side is inside and draw the outline of the template with a pencil. We cut out the blank for the pillow, making an indent from the contour by 1 cm on all sides.

Remove the top layer of fabric. The bottom layer remains, which looks at us with the front side. It is necessary to prepare lace measuring 5x12 cm. You can cut blanks from very wide lace or guipure. The main thing is that one side is openwork. We place the lace on both sides end-to-end along the edges and fasten it to the fabric with pins. In the middle, we deliberately leave a free space to tie the pillow with a ribbon.

We put a layer of fabric back on top and fasten all the edges along the allowances with pins. You can sew with a running stitch instead of pins.

We begin to sew two layers of fabric along the contour. If you sew with your hands, then with a seam. In the process, gradually remove the pins so that they do not interfere.

We leave a distance between the beginning of the seam and its end at 5 cm, we tie a knot at the end.
We cut the corners obliquely, making indents from the edge of 2-3 mm.

We turn out the blank for the pillow. We do this carefully so that the seam does not disperse.

Now you need to fill the pillow with padding polyester or some other filler. If it is a synthetic winterizer, then it needs to be torn into small pieces. Using a sharp object with a blunt end, we fill the pillow to evenly distribute the filler in the corners and not tear the seam.

After we have finished stuffing the pillow, we sew the hole. All stitches should be the same size and very short so that the edge looks neat and is barely noticeable.

The pillow is ready. Now we will decorate it with an additional decor of satin bows. It is better to choose double-sided tapes, as with them the product will look more elegant. Cut off a white ribbon measuring 1x50 cm, singe the ends. We place it strictly along the central line, free from lace. The ends of the tape should be the same length on each side.

We tie the pillow with a ribbon and tie it with a simple knot. Now we cut off the tape with a size of 0.5x30 cm and tie the already tied knot of the previous tape twice. The ends should also be aligned along the same length and singed. With this tape, the rings will be attached.

Now wide ribbon tie into a pretty bow.

Let's add some flair. Cut off a pink ribbon 30 cm long and thread it through the top knot of the bow. The ends must be singeed and aligned in one length. Tie the ribbon back into a bow.

We get such a handmade wedding pillow for rings.

Pre-wedding photo session Love Story

wedding in black and white it's hard to surprise anyone. Newlyweds strive to make their holiday not only unforgettable, but also unique. Therefore, more and more often the celebration is dedicated to any theme - sea, olive, birch. Young people with a special bright temperament make pink weddings, in which red is everywhere, a symbol of fiery love and roses, denoting sensuality and tenderness. For pink wedding all accessories must be unusual. I want to visually demonstrate to you how to create a pillow in red with a rose for offering wedding rings.
You will need a piece of red cloth 35 by 20 cm, threads, cotton wool, a white ribbon, a white mesh and a satin wide (5 cm) ribbon to create a rose. For the petals, get some green ribbon. Use hot glue to hold the rose petals together. The rosette is made using the technique, to create such petals, you can use tweezers and a lighter or a metal ruler with a soldering iron, you need glass to work with a hot soldering iron. When everything is prepared, we will begin to create a pillow. Sew the fabric on three sides.

Then stuff it with cotton wool or other soft material. Do not stuff tightly, otherwise the rings will simply roll off.

Sew up the fourth side at the pillow.

Now we sheathe the edge of the pillow with a white satin ribbon. A width of 4 cm will do. Make clothespins every 4 cm, 2 cm each.

You can first pin the folds with pins, and then overcast everything

From the middle tape, sew a figure eight into the corner.

Cover the rest of the area with a net. It can be sewn on or glued on.

Let's start creating a rose. The mode is a tape of 50 squares, their size is 5 cm. You can cut either with a soldering iron or with scissors, but with further melting of the edges over the lighter.

We bend the square as in the figure.

To create a petal for a rose, you need to cut off the base and solder all the layers, as a result we get the following blanks:

We twist the first petal - this is a rosebud.

The reverse side of the flower is glued in one plane.

Let's start creating green sheets. To do this, take a grass-colored ribbon and cut out the petals with scissors, resembling the original roses.

A lot of accessories are used for a wedding celebration. All of them are made in a certain style and color scheme. A pillow for rings is also created from different materials depending on style and design. Handmade is always better appreciated and the things created will be unique.

Master class: do-it-yourself pillow for rings

This master class shows how to make such a pillow with your own hands using the kanzashi technique.

For work you will need:

• Crepe satin or satin squares of blue color 17x17 cm - 2 pcs.
• Pieces of lace 8.5x19 cm - 2 pcs.
• Blue satin ribbon 5 cm wide.
• White satin ribbon 2.5 cm wide.
• Blue satin ribbon 0.6 cm wide.
• Threads.
• Needle.
• Candle.
• Lighter.
• Brooch.
• Scissors.
• Sintepon.

Manufacturing process

• The edges of the two base squares are singeed over the candles so that the fabric does not crumble.
• One square is placed face up and two pieces of lace are applied to it. white color a little overlap. Lace is sewn with thread and fabric on the sides.
• A blue ribbon 5 cm wide is cut off 19 cm long and the edges are singeed.
• A white ribbon 2.5 cm wide is cut 19 cm long and the edges are singeed.
• With the help of a thread with a needle, a blue ribbon is sewn on the sides. The tape should be exactly in the middle. To do this, you can use a ruler or measuring tape for accuracy. Before sewing the second edge of the tape, it must be moved 0.5 cm towards the center of the pillow so that it bends this distance. This is so that when the pillow is stuffed with padding polyester, the ribbons do not pinch it.

• A white tape is laid on the blue tape exactly in the middle and everything is done the same as with the blue tape.
• Take the second square of fabric and lay it face down on the first square. The edges of the base are stitched with a thread. Reaching the places where the lace was sewn to the fabrics, they carefully open the fabric and alternately pull out temporary threads. The fabric is held by hand so that everything stays in place.
• The pillow is stitched along the edges with an indent of 0.5 cm. But 6 cm are left from one edge not stitched. This edge must not touch the tape. After that, the mark is removed. Excess ribbon and lace are cut off and the edges are scorched over the fire. Small cuts are made in the corners with scissors so that they turn out well.
• The pillow is turned inside out so that the lace and ribbons are face up. Using the back of the brush, go over the back of the edges so that they are better expressed.
• The pillow is stuffed with padding polyester. The edges are filled first, then the rest of the space.
• A hole on the side of the pillow is sewn with a blind stitch.

• The middle of the pillow is seized with a thread and a needle to make a pillow with a recess. The ribbons in the middle are pulled together a little on the thread.
• A 0.6 cm wide blue ribbon is folded at an angle and glued in the middle. Apply glue and stick the tape to the pad.
• A white ribbon 2.5 cm wide is cut into squares. Each square is stitched in the corners from all sides and the thread is pulled together, forming a flower. The resulting flowers decorate the pillow, sewing each flower to it.
• Attach a brooch.

You can make such an accessory in the form of a heart. To do this, a blank of the appropriate shape is cut out. You can decorate it with ribbons, artificial flowers, beads and lace. The pillow hat looks good. It can be decorated with feathers and stones, rhinestones, ruffles and flowers.

This pillow can be crocheted. For this, a base of threads is knitted and stuffed with synthetic winterizer. You can decorate it with various knitted elements using and combining multiple colors. A good color scheme would be a combination of white with Provence.

How to make a pillow for rings with your own hands in the form of a nest

Recently, it has become fashionable to use non-standard solutions. Numerous photos are full of new ideas. One of these is a do-it-yourself ring nest. It is popular and very easy to make.

For work you will need:

• Decorative ball of twigs.
• Paper filler (artificial grass).
• Beads.
• Satin ribbon 0.5 cm wide.
• Scissors.
• Copper wire.
• Hot glue gun.

Manufacturing process

• A ball of twigs is given the shape of a nest, shifting the upper part to the bottom. If some places cannot be crushed, then they should be fixed with copper wire.
• A piece of wire 1 m long is taken and beads are strung on it. One end of the wire is fixed on the base of the nest, and the other end is tucked in so that the beads do not crumble. They begin to wrap the nest with wire, threading its end inward and back. It is necessary to ensure that the beads evenly fill the surface.
• The nest is filled with filler.
• A bow is formed from the ribbon and attached with hot glue.

By using self made you can make the most unusual wedding accessories that will decorate this celebration and make it unforgettable.

Video on the topic of the article