Crochet doll pattern for an angel. Angel - knitted doll
Angel - knitted doll. Description for crochet.
Dear Christmas Angels - by tying them, you will give them the protection of your home, and it will also be a good gift for loved ones.
Size - about 18 cm
Materials and tools:
You can use any thread, because... starching is not required (in my version, the threads are Turkish acrylic “etamine”), for the wings and bell, Turkish iris with lurex, a small piece of foam rubber, 10 mm thick, a little synthetic filler for the head and body, a piece of cardboard for the base, a small piece of fabric for cone and base, a hook for the thickness of the threads, small beads or large beads for decoration (in my version, Czech beads).
VP - air loop
Sc - single crochet
Dc - double crochet
CC - connecting post
Inc - increase (2 stitches in one loop of the previous row)
Dec - decrease (knit 2 stitches of the previous row together)
Head - body:
Knitted in a spiral with single crochets
Chain of 2 v.p.
1st row: 6 sc in 2nd loop from hook (6)
2nd row: increase in each loop of the first row (12)
3rd row: (1sc, increase) x 6 times = 18
4th row: (2sc, increase) x 6 times = 24
5th row: (3sc, increase) x 6 times = 30
6th row: (4sc, increase) x 6 times = 36
7 - 13 rows: 36 sc = 36
Row 14: (4sc, decrease) x 6 times = 30
Row 15: (3sc, decrease) x 6 times = 24
Row 16: (2sc, decrease) x 6 times = 18
Row 17: (4sc, decrease) x 3 times = 15
18 - 19 rows: 15 sc = 15 (Stuff your head with synthetic filler)
Row 20: (1sc, increase) x 7 times, 1sc = 22
Row 21: 22 sc = 22
22nd row: (2sc, increase) x 7 times, increase = 30
23 - 29 rows: 30 sc = 30
Row 30: (3 sc, decrease) x 6 times = 24
Rows 31 - 33: 24 sc = 24 Cut the thread, leaving 20 cm for sewing the body to the skirt.
Knit the skirt separately. It’s more convenient to customize and correct all the shortcomings. Knit in complete rows with a rise stitch, alternating a row of sc, the next row of dc.
Cast on a chain of 25 ch and connect into a ring.
1st row: ch, 24 sc, connect = 24
2nd row: 3ch, (dc, increase) repeat, connect = 36
3rd row: ch, 36 sc, connect = 36
4th row: 3ch, (5 dc, increase) x 6, connect = 42
Row 5: ch, 42 sc, connect = 42
6th row: 3 ch, 42 dc, connect = 42
7th row: ch, 42 sc, connect = 42
Row 8: ch 3, (6 dc, increase) x 6, connect = 48
Row 9: ch, 48 sc, connect = 48
Row 10: ch 3, (7 dc, increase) x 6 = 54
11th row: ch, 54 sc, connect = 54
Row 12: ch 3, (8 dc, increase) x 6 = 60
Row 13: ch, 60 sc, connect = 60
Row 14: ch 3, (9 dc, increase) x 6 = 66
From row 15 to row 26 we alternate the row of sc and the row of dc = 66
ATTENTION: rows 21; 23; 25; we knit behind the back wall of the dc. We knit fans on the front jumper.
FANS: ch, skip 1 loop of the previous row, on the next we knit a fan of 7 Dcs, skip one loop, sc in the loop of the previous row, etc. to the end of the row.
In our version, we get three rows of fans. If desired, this amount can be increased.
Next we proceed to assembling the body. We make the base of the skirt from foam rubber 1cm thick. First, we make a pattern of a truncated cone on paper. From the corner we measure 9 cm and 20 cm, draw 2 circles, we get a half-sun-flared pattern, cut out the pattern, then cut out a blank from foam rubber, lengthen the strip a little so that the base is denser and a second blank from fabric to match the angel. Roll the foam rubber into a tube and cover it with fabric. Then cut a piece of cardboard to the size of the resulting cone, cover it with the same fabric and sew it to the cone. Then put a knitted skirt on the finished cone.
2.
If desired, the bottom can be sewn to the cone, or it can be left free. Fill the top of the body with padding polyester and sew it to the lower part of the body.
3.
GUIDELINES (2 parts)
Chain of 2 v.p.
2nd row: increase in each loop of the first row (10)
3rd row: (1sc, increase) x 5 times = 15
4th row: 15 sc = 15
Row 5: (3 sc, decrease) x 3 = 12
Row 6: (2 sc, decrease) x 3 = 9 fill the palm a little with padding polyester
Rows 7-22: 9 sc = 9 sc, cut the thread, fasten, sew the arms to the body.
SLEEVES (2 parts)
Chain of 2 v.p.
1st row: 5 sc in 2nd loop from hook (5)
2nd row: 3 ch, 5 dc = 5
3rd row: ch, increase, 3 sbn, increase = 7
4th row: 3 ch, 9 dc = 9
Row 5: ch, increase, 7 sc, increase = 11
6th row: 3ch, increase, 9 dc, increase = 13
Row 7: ch, increase, 11 sc, increase = 15
Row 8: ch 3, 15 dc = 15
Row 9: ch, 15 sc = 15
Row 10: knitting fans.
4.
HAIR - CURLS:
Cast on a chain of 8 ch and connect into a ring. Next, alternate simple chains of 40 -45 ch with chains made in the following way (curls):
We knit a chain of 45 - 48 ch, in the 2nd loop from the hook we knit 25 sc increases, then a chain of 20 ch, attach to the ring.
Each chain can be knitted separately, or it can be attached to the previous chain. In this way we tie the required number of chains to evenly fill the back of the head. Sew the hair evenly to the head, alternating a simple chain with a curl. The yellow angel's curls are raised up and pinned to her head. The white angel has simple chains knitted, sewn to his head, and a bunch of twisted threads is attached to the back.
5.
The wings are crocheted with Turkish iris and lurex 1.25
Cast on a chain of 30 ch plus 1 ch (increase stitch)
1st row: Knit 30 sc along the chain;
2nd row: 2 hc, 5 sc, 3 decreases sc, hdc, 8 dc, increase dc, 3 increases dc2n, dc, hdc, 2 sc; (31)
3rd row: 2 sc, hdc, 1 dc, 5 increases dc, 9 dc, 3 decreases dc, 2 hdc, 5 dc; (33)
4th row: skip treble, 6 ps, 3 sc, hdc, 18 dc, hdc, 3 sc; (32)
Row 5: a thin wire is tied (I use a wire that matches the threads, used for beading, diameter 0.33 - 0.4 mm, comes in different colors) with single crochets on both sides of the wing. Using a wire, the position of the wing is fixed, its contour and size are adjusted
Row 6: We tie the wing in a “crawfish step” as follows: 2 ch, ( (sc, ch) through the post) repeat until the end. We tie the second wing with a “crawfish step” in a mirror image.
6.
7.
You can see more knitted Angels in THIS section.
source - http://forum.myjane.ru/viewtopic.php?t=39324
How can you decorate a Christmas tree beautifully? Can buy beautiful toys, garlands, bright firecrackers and others original jewelry. Or you can go the other way - make them yourself, involving the whole family in this activity. For example, children will be able to make interesting decorations from paper, plastic boxes and other scrap materials, and mother will be able to knit beautiful angel. The work, however, is quite painstaking, but the result will exceed all expectations. The master class and a detailed diagram will help make angel crochet work enjoyable and exciting. This cute product can not only be a decoration for the Christmas tree and home, but also an excellent souvenir that can be given as a gift. The Christmas holidays will become even warmer with these beautiful crafts, the diagrams of which even a novice needlewoman can understand. Angels are the most beautiful knitted symbol of Christmas.
Openwork weightless angel
Knitted toys have some special magnetism; they charm and warm. And this sweet, airy angel will please everyone who sees him. It is not difficult to knit it, and such work will bring a lot of pleasure. Master class with detailed description will simplify knitting this openwork and light decoration for the Christmas tree or just for the interior.
Materials
This cute Christmas angel can be knitted with yarn white, a product in a soft blue color will look good. Iris yarn is best suited; you should not take synthetic yarn, but rather linen or cotton. You also need a crochet hook No. 1 - 1.5. You will need padding polyester or any other filler, pins, PVA glue, cling film, plasticine, and decorative tape.
Description
Head
These cute Christmas angels are crocheted from the top of the head. You need to start with a chain of air loops, enclosed in a ring. The chain must be tied in a circle, increasing the number of loops. And thus form a knitted ball (this will be the head), and when it is almost ready, it must be stuffed with padding polyester. Reduce the number of loops to the initial cast-on edge. There is no need to break the thread.
Torso
Knit the body without tearing the thread from the head. Detailed master class not needed here, since you need to make the body in the form of a cone with any arbitrary pattern. Experienced needlewomen can use their favorite patterns or come up with something unusual, and beginners can be advised to knit double crochets.
Sleeves and arms, wings
The Christmas angel is almost ready, now we need to make knitted sleeves and arms. It is important to place them symmetrically.
Separately make knitted wings in the shape of a butterfly (no need to sew them on yet).
Shaping toys
Take plasticine and mold it into a cone that will fit the size of the tied torso. Wrap the prepared cone in cling film. Place the angel's body on this base and securely secure it with pins at the bottom. Take glue and generously lubricate the body of the toy with it. Be sure to saturate your head, but there is no need to be zealous. Knitted hands and also moisten the sleeves in glue and give them the desired shape. Do the same with the wings, only you need to fix them with pins, leveling them on a piece of film.
When everything is dry, then everything related details can be connected. Sew on the wings, additionally securing them with glue. When the toy is completely dry, you can tie it on decorative cord to the angel's back and hang it on the Christmas tree or other place.
Such a simple master class is convenient because every knitter can choose what she likes best, use her favorite patterns and patterns.
Christmas Angel: video master class
Angel knitted with a granny square pattern
Hands
When 1 loop remains at the end of knitting the ball, you can proceed to creating handles.
Cast on 14 ch, then make 1 st in the 8th loop from the beginning. b/n, tie 7 ch. Connect to the beginning of the chain. Do the same for the second handle.
Nimbus
Now there will be a master class on knitting a halo for a toy.
1 p.: 20 v.p.;
2 p.: rise, 1 tbsp. b/n, in the next 2 loops knit 2 tbsp. b/n, and then in each - 2 ss2n. Knit 2 ss3n into 3 loops, then make 2 yarn overs, etc. in mirror order.
Connect the ends of the headband, leaving threads so that it can be sewn to the head.
Granny squares
A master class on creating a granny square will teach you how to create this simple but beautiful knitted pattern. You will need 3 squares. The classic granny square is knitted like this:
6 v.p. - into a ring;
1 r.: 3 ch, 2 tbsp. s/n, 2 vp, 3 tbsp. s/n., repeat twice;
Rows 2-4: knit under v.p. 3 tbsp. s/n, and between them make 2 vp;
The corners of the square are obtained like this: 3 tbsp. s/n, 2 vp, 3 tbsp. s/n.
Tie 2 colored squares with white yarn and connect them. Sew all the details.
The knitted crystal angel for the Christmas tree is ready!
Even in the time of our great-grandmothers, it was believed that a doll made by hand would bring good luck to its owner and serve as a kind of amulet. And even today, when store shelves are full of a wide variety of toys, knitted dolls manually are very popular. Large and small, themed and collectible - they can become not only excellent and absolutely safe fun for children, but also an original gift for adults, because a piece of the craftswoman’s soul is put into each product.
To tie knitted doll is not difficult, so anyone who has at least some knitting skills can create their own knitted “girlfriend” without much difficulty. There are many patterns for knitting dolls, and after choosing the desired product, you can safely begin the process itself. And in order to better understand how to knit a doll with knitting needles, it would be useful to study the process step by step.
In order for the product to turn out to be of high quality, it is important to take a responsible approach to the choice of materials that will be needed during manufacturing:
- Yarn. The most important selection criteria are strength and safety. The threads should hold their shape well, not form “pellets”, be smooth and even. It is also important to pay attention to the color: it is better not to use too bright, “poisonous” shades, since “chemical” dyes are often used to color them, which can cause allergic reactions. The same goes for flowers that shed.
It's better to choose natural species yarn - cotton or linen. They are pleasant to the body and safe, but there is a drawback - they are a little dull. If you need a rich color or bright shade, you can use acrylic threads or yarn mixed type(acrylic with natural thread); - In order for the doll to turn out neat, it is important to choose the correct size of knitting needles that matches the thickness of the selected yarn. As a rule, yarn labels always indicate the number of knitting needles recommended for knitting. But we recommend taking knitting needles one size smaller so that when knitting small parts there are no holes left;
- Filler. Exactly from the right choice The filler depends on the shape of the doll. It holds best, is easily pushed into even the narrowest corners, and holofiber and synthetic down evenly fill the space.
See our selection knitted dolls and choose the best one for yourself!
Knitted doll, models from the Internet
Educational doll Knitted bead
Educational doll for babies knitted with knitting needles. The author of this wonderful Daisy doll. If your baby is growing up and he begins to study the world, then such a doll will help him in his development. It will become your baby's favorite toy. The doll's name is “Bead”.
Knitted snowflake doll
This snowflake doll can be a good decoration for a winter home.
For work you will need white and blue acrylic threads, white grass threads, and a little lace.
Knitted dolls: Molly (in red) and Lucy (in yellow)
Translated by Sweet Kitty. Both dolls (17 cm in height) are knitted according to the same pattern. Each doll will require about 40 grams of yarn and about 25 grams of filler, 3mm knitting needles. Shoes, legs, torso and head are knitted in one piece. Legend: persons. – knit stitch purl. – purl loop p. – loops First, the colors for Lucy are indicated, then in () the colors for Molly are given. In case the colors are the same for both dolls, only one color is indicated.
Knitted Snow Maiden doll
The height of the toy without a crown is 25 cm, with a crown – 30 cm.
This wonderful Snow Maiden will be wonderful New Year's gift for the little princess.
Knitted geisha doll
So, for a doll 25cm high you will need:
1 skein (even half a skein is enough) of thread of the following colors:
- ecru (I have white - it’s more dramatic)
- black
- fuchsia (raspberry)
- red
- curry (orange)
- 35 cm tone-on-tone ribbons, 2.5 cm wide
- 15 cm ribbons of the same color, 1.5 cm wide
Pin Up girl. Small knitted dolls
Translation by Evgeny Strekanov.
To knit dolls you will need:
- wool or acrylic yarn, meter 200-300m per 100g
- straight and circular knitting needles No. 3.25, or others suitable in thickness for the selected yarn
- safe eyes
- marker
- filler for toys
- yarn needle
- embroidery needle
- tailor's pins
Knitted doll Tanya with knitting needles
To knit a doll you will need: acrylic yarn in beige, white, red, yellow and a little black and pink, knitting needles No. 2.5, hook No. 2, filler.
Knitted mermaid doll
Knitted twin dolls
- Dolls height 28 cm
- 85 g of filler required for each doll
- The indicated color is given for a boy, trace. the color indicated in brackets is for girls.
- If one color is specified, it is used for both dolls.
Knitted doll
Cute doll tied up with my mother's hands, will become a good friend to your child.
Pupa height: 41 cm.
To knit a toy you will need: 50 g of beige or white, some red or purple Manor Island yarn (100% cotton, 125 m/50 g), a set of stocking needles No. 3.5, hook No. 3, padding polyester for stuffing.
Knitted baby doll
For knitting you will need the following thread colors:
black, gray, red, carrot (orange), light green, green, yellow, dark green, light blue, cyan, brown, beige, cream (for faces and hands), purple. Knitting needles of a suitable size, stuffing for toys, scissors, knitting needle.
Knitting doll mom Sally
To make a doll, you will need the following thread colors: black, gray, red, carrot (orange), light green, green, yellow, dark green, light blue, cyan, brown, beige, cream (for faces and hands), purple .
Knitted dolls Pierrot and Pierrette
Knitted Cinderella doll - shapeshifter
For Cinderella we will need a fairly wide range of colors:
- -40 grams of blue yarn
- -50 grams of white yarn
- - flesh-colored yarn
- -bright yellow yarn
- -light yellow yarn
- -red yarn
- -black yarn
- -light brown yarn
- -light pink yarn
- -light green yarn
These are the main colors, if the weight is not indicated, then you will need less than 40 grams.
In addition to yarn, we will need 80 grams of holofiber type filler
The tools for the doll are quite simple. You will need 3 mm and 4 mm knitting needles (for hair). Can be knitted with any knitting needles. I knit with circular and short needles (no longer than 60 cm). Just right for a doll.
Witch by Alan Dart.
For knitting you will need: yarn different colors thickness 280m/100g, knitting needles 3 mm, 40g filler.
Knitted Alice doll
Knitted dolls for a wedding cake
Materials for knitting the Wedding Cake toy (description given with the cake).
- Yarn Sirdar (or Hayfield) Bonus DK 100 g/280 m
- 1 skein of colors White (961), Aran (993),
- Remaining colors Flesh Tone (963) and Black (965)
- Yarn Sirdar Country Style DK 100 g/318 m
- 1 skein each of Mountain Ash flowers (589) and Greystone leftovers (408)
- Yarn Sirdar Snuggly 2 ply 50 g / 462 m
- 1 skein White (251),
- leftover chocolate brown
- golden brown
- pale pink and green colors.
- Knitting needles 3 mm
- Hinge holder (DP)
- 50 g padding material
- Strip of thick batting 99x75 cm
- Cardboard circle 12 mm thick and 20 cm in diameter
- Sturdy white cardboard
- 5 pearl beads
- Ivory sewing thread
- Pink pencil
- Transparent glue
- Compass
- Tweezers
- Hair fixation spray
Dimensions: Cake (including stand) 20 cm wide, 10 cm deep. The bride and groom are 12.5 cm high.
Doll - peasant woman with knitting needles
Mom doll. The height of the toy is approximately 13 cm.
Materials: colored yarn, thin yarn for hair, floss for decorating the face and shirt, 5 knitting needles No. 2.5-3, a needle with a wide eye, hook No. 2.5, a circle of cardboard, wire or a brush for cleaning a smoking pipe.
Knit on 4 needles (3+1 working needles).
Doll Masha knitted
Knitted Leia doll
To knit a doll you needed:
- Lanoso Alara yarn 50% cotton, 50% acrylic (50 g - 140 m) white color - 50 g and a small amount of pink, crimson, gray, brown, black yarn;
- knitting needles No. 3 - 5 pieces (short) and long No. 3.5;
- nylon tape (several cm) for eyelashes;
- filler.
Knitted Snow White doll
MK dolls Susan (author Alona Rabinovich)
There is a very interesting artist in England - Suzanne Woolcott, very young, born in 1977. She draws girls who just beg to be dolls. Here's what Suzanne says about her girls: “The lack of facial expression makes them more sincere, the lack of emotion is colored by a strong expression of grief with a hint of hope. My art is a profound expression of the lost childhood innocence in all of us.” In honor of the artist who inspired me to create this cutie, I named her Susan.
Angels are creatures without flesh who protect people from misfortunes and protect each person individually. Some people believe in guardian angels, but others don't. In any case, if you crochet and give someone a beautiful, openwork angel- guardian, then he can become a real talisman. If the gifted person does not share your faith, then he can hang crochet angel just on the Christmas tree as a toy. But to be honest, we have never come across people who are indifferent to angels. That's why we decided to prepare large selection crochet angel patterns.
Crochet angels can be flat, in the form of appliqués. Such angels can serve as decorations on the wall or on the window during the Christmas holidays.
Volumetric angels, often openwork, are crocheted with thin threads and can be used as New Year's decoration to the Christmas tree. Or they can become your amulet.
Is it necessary to starch crocheted angels?
On our website and on the Internet we found several detailed wizard- classes on knitting angels. It's worth noting that if you tie an angel large size 20-25 cm from thin threads with hook No. 1-1.2, then you will have to strengthen its shape using a solution of PVA glue or starch. You will also need a base on which the angel will dry.
If you take thicker threads and a hook, the angel will hold its shape on its own. Although it won't be as impressive.
How can you decorate an angel with crochet?
- You can crochet an angel from multi-colored threads
- use gold or silver yarn for the binding if it is a Christmas angel
- You can give the angel a heart, a staff, a flashlight, again depending on the theme of the angel
- do beautiful hair(contrasting color) or curl your angel
- beads and sparkles are perfect for New Year's angels
Choose the most beautiful angels crochet and knit them for the upcoming holidays: New Year, Christmas, Valentine's Day.
Crochet angel, patterns from our needlewomen
Crochet angel, master class from Irina Sheiko
This is the Angel Irina knitted for Christmas. Height 17cm, skirt diameter 7cm. In this work I used Chinese threads of the “Iris” type with the inscription on the label “Gold thread”, 100% cotton, 0.9 mm hook.
Two angels, crochet
Angel with bells (model 1).
Height: 12 cm. Materials: “Iris” yarn (100% cotton), 15 g white; a little green; white small beads; narrow green satin ribbon; suitable shape; a little padding polyester; hook No. 0.9.
Angel with a flower (model 2).
Height: 23 cm. Materials: “Iris” yarn (100% cotton; 87 m/10 g), 30 g white; a little nylon brown; 1 bead; colored satin ribbons; hook No. 0.9.
Crochet snowflake and angel, Irina's work
Crochet angel, work by Elena
Crochet angel, work by Anna Ratova
Angel size: height approx. 20 cm.
Materials: yarn (100% cotton), approx. 30 g white, hook No. 1.5.
Crochet angel pendant, original work of Maria Casanova
The “My White Angel” pendant is knitted using the Irish lace technique from Italian yarn “Lana Grossa (Secondo), and the mesh is made from yarn “Katia” (Syros). It can be hung on the Christmas tree or on the door.
New Year's still life: flowers and crocheted angel
I present a “New Year’s still life” that will fit well into the interior and create an atmosphere of celebration and mystery. For the composition I used the remains of wool and acrylic threads, hook No. 2.7 (Clover).
Crochet angels
A little angel.
Loin knitting.
Materials: “Iris” yarn (100% cotton), 8 g white; satin ribbon; passe-partout; hook No. 0.9.
Size: arbitrary.
Big angel.
Materials: “Iris” yarn (100% cotton), 11 g white; hook No. 0.9. Height: 23.5 cm. Width: 21 cm.
Crochet angel, diagrams and descriptions from the Internet
Crochet heart angel, master class from Galy from the Country of Masters
I’ll make a reservation right away - I didn’t come up with this (I only gave the heart to him). This angel is from Valya Valentina magazine. Unfortunately, the author of the work is not indicated in the magazine and I don’t know who to thank for the wonderful angel. Let's start slowly. I used “Snowflake” cotton threads and a 0.7 mm hook.
Angel Constance crochet
Master class from Ekatrina Novoselova.
For work we will need: Threads Rose 100% Cotton and hook 0.8.
Crochet angel
Size – about 18 cm
Materials and tools:
You can use any thread, because starching is not required (in my version, the threads are Turkish acrylic “etamine”), for the wings and bell, Turkish iris with lurex, a small piece of foam rubber, 10 mm thick, a little synthetic filler for the head and body, a piece of cardboard for the base, a small piece of fabric for cone and base, a hook for the thickness of the threads, small beads or large beads for decoration (in my version, Czech beads).
Openwork crochet angel, master class!
For knitting you will need:
- Cotton threads (Iris or Snowflake)
- Hook 1.25
- Beads and decorative elements (mine is a heart held by an angel.)
- Wire
- Sugar syrup and starch paste.
- Glue gun or super glue.
- Angel starch mold (I use a piece of linoleum)
Crochet angel from zelyonka
Three angels according to one scheme
Openwork angels with diagrams and descriptions
Mexican crochet angel
Crochet air angel
You will need: the remains of white Iris yarn (100% cotton) and a hook No. 1.4, a little padding polyester.
Crochet Christmas angels
Angels are connected without assembly.
You will need:
- cotton thread No. 10, white 640 m, pink 18 m, green 18 m.
- 4 white beads with a diameter of 6 mm
- 76 cm of white twisted cord with a diameter of 1.3 cm
- 1.8 m satin ribbon width 0.3cm
- artificial flowers
- filler
- paint brush
- White paint
- scotch
- starch solution
- food film
- foam mold 5*13*25 cm
- a piece of thick cardboard measuring 41 cm
- stainless steel pins
- wooden ball 3.8 cm in diameter with a flat bottom
- glue gun
- hook No. 1.8cm
Crochet angels patterns and description:
Crochet angel, design Joan Glass
Knitted from Yarn Art Violett yarn (282m/50g) with crochet number 1.3.
Crochet angels with patterns:
Angel - knitted doll. Description for crochet.
Dear Christmas Angels - by tying them, you will give them the protection of your home, and it will also be a good gift for loved ones.
Size - about 18 cm
Materials and tools:
You can use any thread, because... starching is not required (in my version, the threads are Turkish acrylic “etamine”), for the wings and bell, Turkish iris with lurex, a small piece of foam rubber, 10 mm thick, a little synthetic filler for the head and body, a piece of cardboard for the base, a small piece of fabric for cone and base, a hook for the thickness of the threads, small beads or large beads for decoration (in my version, Czech beads).
Legend:
VP - air loop
Sc - single crochet
Dc - double crochet
CC - connecting post
Inc - increase (2 stitches in one loop of the previous row)
Dec - decrease (knit 2 stitches of the previous row together)
Head - body:
Knitted in a spiral with single crochets
Chain of 2 v.p.
1st row: 6 sc in 2nd loop from hook (6)
2nd row: increase in each loop of the first row (12)
3rd row: (1sc, increase) x 6 times = 18
4th row: (2sc, increase) x 6 times = 24
5th row: (3sc, increase) x 6 times = 30
6th row: (4sc, increase) x 6 times = 36
7 - 13 rows: 36 sc = 36
Row 14: (4sc, decrease) x 6 times = 30
Row 15: (3sc, decrease) x 6 times = 24
Row 16: (2sc, decrease) x 6 times = 18
Row 17: (4sc, decrease) x 3 times = 15
18 - 19 rows: 15 sc = 15 (Stuff your head with synthetic filler)
Row 20: (1sc, increase) x 7 times, 1sc = 22
Row 21: 22 sc = 22
22nd row: (2sc, increase) x 7 times, increase = 30
23 - 29 rows: 30 sc = 30
Row 30: (3 sc, decrease) x 6 times = 24
Rows 31 - 33: 24 sc = 24 Cut the thread, leaving 20 cm for sewing the body to the skirt.
Knit the skirt separately. It’s more convenient to customize and correct all the shortcomings. Knit in complete rows with a rise stitch, alternating a row of sc, the next row of dc.
Cast on a chain of 25 ch and connect into a ring.
1st row: ch, 24 sc, connect = 24
2nd row: 3ch, (dc, increase) repeat, connect = 36
3rd row: ch, 36 sc, connect = 36
4th row: 3ch, (5 dc, increase) x 6, connect = 42
Row 5: ch, 42 sc, connect = 42
6th row: 3 ch, 42 dc, connect = 42
7th row: ch, 42 sc, connect = 42
Row 8: ch 3, (6 dc, increase) x 6, connect = 48
Row 9: ch, 48 sc, connect = 48
Row 10: ch 3, (7 dc, increase) x 6 = 54
11th row: ch, 54 sc, connect = 54
Row 12: ch 3, (8 dc, increase) x 6 = 60
Row 13: ch, 60 sc, connect = 60
Row 14: ch 3, (9 dc, increase) x 6 = 66
From row 15 to row 26 we alternate the row of sc and the row of dc = 66
ATTENTION: rows 21; 23; 25; we knit behind the back wall of the dc. We knit fans on the front jumper.
FANS: ch, skip 1 loop of the previous row, on the next we knit a fan of 7 Dcs, skip one loop, sc in the loop of the previous row, etc. to the end of the row.
In our version, we get three rows of fans. If desired, this amount can be increased.
Next we proceed to assembling the body. We make the base of the skirt from foam rubber 1cm thick. First, we make a pattern of a truncated cone on paper. From the corner we measure 9 cm and 20 cm, draw 2 circles, we get a half-sun-flared pattern, cut out the pattern, then cut out a blank from foam rubber, lengthen the strip a little so that the base is denser and a second blank from fabric to match the angel. Roll the foam rubber into a tube and cover it with fabric. Then cut a piece of cardboard to the size of the resulting cone, cover it with the same fabric and sew it to the cone. Then put a knitted skirt on the finished cone.
2.
If desired, the bottom can be sewn to the cone, or it can be left free. Fill the top of the body with padding polyester and sew it to the lower part of the body.
3.
GUIDELINES (2 parts)
Chain of 2 v.p.
2nd row: increase in each loop of the first row (10)
3rd row: (1sc, increase) x 5 times = 15
4th row: 15 sc = 15
Row 5: (3 sc, decrease) x 3 = 12
Row 6: (2 sc, decrease) x 3 = 9 fill the palm a little with padding polyester
Rows 7-22: 9 sc = 9 sc, cut the thread, fasten, sew the arms to the body.
SLEEVES (2 parts)
Chain of 2 v.p.
1st row: 5 sc in 2nd loop from hook (5)
2nd row: 3 ch, 5 dc = 5
3rd row: ch, increase, 3 sbn, increase = 7
4th row: 3 ch, 9 dc = 9
Row 5: ch, increase, 7 sc, increase = 11
6th row: 3ch, increase, 9 dc, increase = 13
Row 7: ch, increase, 11 sc, increase = 15
Row 8: ch 3, 15 dc = 15
Row 9: ch, 15 sc = 15
Row 10: knitting fans.
4.
HAIR - CURLS:
Cast on a chain of 8 ch and connect into a ring. Next, alternate simple chains of 40 -45 ch with chains made in the following way (curls):
We knit a chain of 45 - 48 ch, in the 2nd loop from the hook we knit 25 sc increases, then a chain of 20 ch, attach to the ring.
Each chain can be knitted separately, or it can be attached to the previous chain. In this way we tie the required number of chains to evenly fill the back of the head. Sew the hair evenly to the head, alternating a simple chain with a curl. The yellow angel's curls are raised up and pinned to her head. The white angel has simple chains knitted, sewn to his head, and a bunch of twisted threads is attached to the back.
5.
The wings are crocheted with Turkish iris and lurex 1.25
Cast on a chain of 30 ch plus 1 ch (increase stitch)
1st row: Knit 30 sc along the chain;
2nd row: 2 hc, 5 sc, 3 decreases sc, hdc, 8 dc, increase dc, 3 increases dc2n, dc, hdc, 2 sc; (31)
3rd row: 2 sc, hdc, 1 dc, 5 increases dc, 9 dc, 3 decreases dc, 2 hdc, 5 dc; (33)
4th row: skip treble, 6 ps, 3 sc, hdc, 18 dc, hdc, 3 sc; (32)
Row 5: a thin wire is tied (I use a wire that matches the threads, used for beading, diameter 0.33 - 0.4 mm, comes in different colors) with single crochets on both sides of the wing. Using a wire, the position of the wing is fixed, its contour and size are adjusted
Row 6: We tie the wing in a “crawfish step” as follows: 2 ch, ( (sc, ch) through the post) repeat until the end. We tie the second wing with a “crawfish step” in a mirror image.
6.
7.
You can see more knitted Angels in this section.
source - http://forum.myjane.ru/viewtopic.php?t=39324
