home » Diary » Handmade scrunchies for hair. How to make children's hair ties

Handmade scrunchies for hair. How to make children's hair ties

How to make an elastic band for hair? This is a question girls often ask themselves. long hair. A variety of elastic bands are able to modify the hairstyle, they can be chosen both for everyday outfit and for an evening out. There are options for little girls and schoolgirls, and there are original products for adult ladies.

Our article is about do-it-yourself hair. The basis of any product is a purchased simple elastic band without any decorations and decorate it depending on the wishes, the chosen color and style. You can wrap the elastic completely with fabric, or you can only add a central decorative element made of fabric, ribbons or lace. Often a bright brooch or button, beads or rhinestones are sewn into the middle. Consider a few interesting ideas how to make hair tie different ways.

Elastic band on a felt basis

This option is suitable for beginner craftsmen, since making such a craft is quite simple. As a basis, take a small circle cut out of felt. In this case, we see that in the sample in the photo below, we used yellow. To decorate the gum, you need to prepare many identical pieces of pink ribbon, a package of small decorative lace flowers, beads to decorate the middle and a fluffy pompom white color.

The decoration of the product begins with the attachment of pieces of tape bent with loops. First, the edges of the tape must be melted with a candle or a lighter so that the threads at the edges do not subsequently fall off. You can grab the loops with stitches to the base of felt or glue with a glue gun. The next step is to place the flowers close to each other along the inner circumference so that the ends of the ribbon are not visible. It remains to glue half beads at an equal distance or sew on round beads (you can use rhinestones or pebbles, beads or other decorative material) and set a fluffy ball in the very middle. When everything is ready, sew the craft on an elastic band from the back.

Contrasting bow

Before you make your own scrunchie, think about what color ribbons you will need so that the product is in harmony with clothes and accessories. To make such beautiful bow like below picture,need to buy wide and narrow tape light chocolate color and white organza. To connect all the layers of the craft, a beige button was used, on which you can glue a bright crown with rhinestones.

Start work on wide ribbon. Do not cut off the segment immediately, so as not to be mistaken. It is better to first fold the bow, consisting of several turns, leaving small beveled edges at the beginning of the work and at the end. Melt them immediately so that the cut sides look neat and the threads do not fall off when using an elastic band. At the central point, make a few stitches with threads matched to match, thereby fixing the bow.

The next step is to pick up a wide strip of organza, folded in half. To do this, stepping back a little from the edge, stitch the entire length of the fabric with stitches, tighten the thread and sew to the bottom tape. Lastly, a thin ribbon bent with eyelets is attached, and all layers are connected with a decorated button.

Three-layer bows with beads

Before you make a beautiful scrunchie as in the photo below, pick up a wide and thin ribbon in white and medium width with a contrasting pattern. The central holder of all layers is red bright heart.

The long ends are left only on a thin ribbon located on top of two bows. 3 beads are strung on each hanging edge, matched in the same color scheme as the tapes. The edges are tied into tight knots so that the beads do not fall off when moving.

Kanzashi flowers

How to make small hair ties so that they look spectacular? The kanzashi technique will help. This is the manufacture of beautiful floral elements from simple satin ribbons. Flowers consist of 5 identical petals (two white and three red) and two green ribbon leaves. Let's see how to make such elements.

To create a petal, you need to cut squares of white and red. Then each folds in half diagonally. Then a couple of folds are made on each side, collecting the edges in the center. It is most convenient to use tweezers to hold the tissue together. Then trim the lower edge with scissors and melt with a lighter, pressing all the layers with tweezers. One petal is ready! All other details are made in the same way and glued to each other with a glue gun, attaching a small pebble for beauty in the center.

How to make leaves

After making the main flower for the elastic bands for the girl, get to work on the leaves. To do this, you need to fold a green ribbon 10 cm long in half. We leave the bent edge intact, but from one of its corners we draw straight line to the opposite on the other side and cut with scissors as planned. Get a triangle. Again, the cut edges are melted and pressed against each other with tweezers or fingers. Hold a little and they are securely glued together without glue.

It remains only to turn the blank to the other side and attach the leaves under the previously made flower. Here you can use glue gun for connecting parts together and attaching decorations to the elastic itself.

Bow of kanzashi petals

Now let's look at how to make bow-shaped hair ties from a ribbon. You will need a base to place the finished petals. It is most convenient to cut it out of a sheet of felt, matched to the color of the satin ribbon. You already know how to make petals using the kanzashi technique. To make this hair band, you will need to make 12 identical elements and attach them to the felt base in the form of two connected triangles.

Between them, place a central brooch with shiny rhinestones and a beautiful bow can be installed on an elastic band.

Craft for a beam

A beautiful elastic band for a daughter to put on a hair bun is made from different elements combined in one composition. These are white flowers in kanzashi technique, and large multi-layered details of contrasting colors. Arrange the assembled elements symmetrically, leaving room for a large bow.

The elastic band looks very impressive due to the combination of different types of petals and fabrics, but all the details look harmoniously together. Beads are selected as additional elements of blue color and large rhinestones.

As you can see, it is not difficult to make a hair band with your own hands from ribbons and fabric. The photographs presented in the article will make it easier to bring the described work to life. Can be mixed and matched different types parts in one product. The main thing is to choose fabrics and decorative elements that look harmonious together, then the finished elastic will turn out beautiful and tasteful. Good luck!

The beauty of such an undertaking is that in order to make an elastic band for hair with your own hands, you can use any materials at hand without any restrictions:

fabrics - leather, felt, satin, cotton, and cuts of any size, because such an ornament does not need much and can be sewn not from one, but from several patches;
thin inexpensive purchased elastic bands or wire;
beads, stones, borders and everything else you can think of for decorating jewelry;
plastic.

Of course, you will also need improvised tools and materials to hold it all together:

threads;
needles;
scissors;
metal small clips and rivets;
wire;
glue.

original decoration for hair are elastic bands that are made by hand. They will favorably emphasize your hairstyle and allow you to quickly collect curls in a ponytail or braid. Thanks to the detailed master classes in this article, you will learn how to create beautiful hair jewelry.

New is well forgotten old. Rubber bands are becoming more and more popular. It turns out that sewing them is very simple, you just need to carefully follow each step in the instructions.

Prepare the following materials:

a blank in the form of a simple rubber band;
a strip of fabric measuring 90 cm by 10 cm;
needle and thread to match the material.

Progress:

Fold the piece of fabric lengthwise, right side inward. Take the rubber band in your hands. Grasp the workpiece from the inside with the ends of the material.

Attach the thread to one of the corners of the strip. Start sewing two opposite cuts, making small stitches at the same time.

Sew the entire piece of fabric in this way.

For convenience, wrap the strip in folds along the inside of the elastic band.

When you have completely sewn the edges of the fabric, secure the thread with a knot.

Thread through thumb under the material.

Gradually turn the fabric right side out. At the same time, help yourself with your fingers, but do not pull the workpiece sharply, as the seam may disperse.

You will get such a base for gum.

Wrap the edges of the cuts inward and sew with a blind seam.

That's all, the rubber band for hair from the material is ready!

Another easy material to work with is tape. They have processed edges, which means that the fabric will not disperse along the threads.

Prepare:

satin ribbons different widths;
scissors and thick thread;
decor in the form of a button;
candle or lighter;
glue gun;
regular gum.

Stages of work:

Cut the widest ribbon to a length of 45 cm. Cut the ribbon at an oblique angle. Now cut each next tape 2 cm shorter. In total, you need to prepare 5 elastic bands.

Advice. To prevent the cuts of the tapes from fraying, process them with a fire or a soldering iron.

Gather the ribbons together. Arrange them as the width of the fabric decreases. So you will have the widest at the bottom, and the narrowest at the top. Visually mark the middle along the longest strip and put the thread.

Advice. If there is no twine in the color of the ribbons, then use the narrowest ribbon.

Pull the tapes tight. Tie the thread tightly into several knots.

Turn the workpiece over to the back, pull the thread and tie the elastic to the central part of the ribbons.

Glue decor on top. Don't use it too much big size, as it will look out of place on hanging ribbons.

Volumetric hair bands will turn out if they are knitted from thick threads. To create such an original elastic band, you only need a hook and yarn.

Make the first loop on the thread. To do this, thread the thread through the loop and tighten it.

Cast on 12 air loops. They will serve as the basis for the entire knitting.

Pass a braid of thread through the elastic and connect its ends with a simple column.

dial three air loops, then connect with the main part. Continue tying the elastic with columns. You can choose any other crochet pattern that is convenient for you.

The first row of work should be done in a circle. In this case, tie the last column together with the first.

Tie an elastic band along the entire length in a similar way.

Finish work when knit to the first row. Tie the edges together, make a knot and cut the thread.

No one will have such a rubber band!

If you do not know how to knit or sew, then the following instructions for creating hair ties are just for you. The basis for decoration will be chenille wire. It is often used to decorate bouquets.

fluffy pink and green wire;
workpiece - gum.

Master Class:

Take six pink blanks. Pass them through the elastic, gather them together.

In the central part of the wire, make one turn around the axis. So you fix the decor on the elastic.

Now begin to bend the ends of the wire in a spiral.

Twist it all the way to the center of the knot.

Prepare all other parts in this way. Twist the wire gradually and the one that is located nearby.

As a result, you will get such a blank with round petals.

Form a rosebud. To do this, straighten the wire in a circle and slightly at an angle to the middle of the flower.

For leaves, use green wire. Screw it on the back of the bud.

Twist the two ends in the same way as the petals.

The original gum fluffy wire ready!

Thanks to such detailed master classes, you can make your own hair jewelry. Most importantly, follow each step in the instructions.

Modern needlewomen make such skillful jewelry that one can only be surprised. They are able to make a hair ornament that will emphasize the beauty of the hairstyle, in a few different techniques. Satin ribbons for elastic bands are considered a convenient material, because you can create from them from a flower to a decoration for a beam using simple techniques.

Craftswomen are able to make rubber bands with their own hands from ribbons in several techniques, which, upon careful consideration, become quite simple. The main thing in this business is to learn the basic skills, follow the schemes and master classes and use your imagination to make it happen. beautiful decoration, characterized by individuality and spectacular appearance.

The basis of the manufacture of elastic bands is the technique of weaving, folding and collecting elements into one large pattern. It is better for beginner craftswomen to take basic skills as a basis, learn them, and then start to complicate.

Even simple rubber bands can look spectacular on a girl's hair if they are skillfully decorated. Options for decorating finished products are embroidery, weaving, beads, beads, sequins.

You can try the most different variants decorations to make beautiful decorations.

The materials for the manufacture of rubber bands are satin ribbons of different colors and shades, beads, beads, decor elements.

Of the auxiliary tools, you will need textile glue, scissors, a glue gun, a fire source (lighter candle) and skillful hands. Sometimes craftswomen take a ready-made rubber band bought in a regular store and decorate it in their own way.

A well-known technique for creating elastic bands from satin ribbons is the Japanese art of kanzashi. To make beautiful children's accessory for hair resembling a dahlia or chamomile, girls need to follow the master class:

From a satin or silk cut, make 16 square patches 5 * 5 cm in size, run along the edges with a lighter so that the threads do not come out. Repeat for the other color (inner petals).
For the outer row of petals, bend each square diagonally, repeat, fire over the corner. For the inner row of petals, the squares are bent diagonally three times.
Fold the smaller workpiece inside the large one, glue it.
Make 12 single-layer blanks for additional decoration.
From thick cardboard cut out 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over with a cloth.
Glue each two-layer petal to a large base in a circle. Repeat for the second tier. Glue single-layer petals to a smaller base. Glue 2 bases together.
Decorate with beads, glue the resulting flower on a hairpin or crab.

Do-it-yourself rubber bands from satin ribbons, made of material of different widths, are spectacular and voluminous. There is a master class for making an accessory:

Cut out a rectangular blank 9 * 16 cm from cardboard, draw horizontal line in the middle. Wrap ribbon around it.
Remove the skein without damaging the coils, stitch the middle, pull it off until a bow is formed.
Repeat the technology for making a bow from a different material and a narrower ribbon.
From a fabric of a contrasting color, cut out pieces of the same length and width as the resulting bow, singe the edges.
Collect all the elements on a string.
Cut out a cardboard circle, cover with a cloth, sew to the rubber band.
Use a glue gun to glue a bow on a circle, decorate with small beads, rhinestones, buttons or pebbles.

To make rubber bands from satin ribbons with your own hands, decorating a bun-bun, girls will need to follow step by step instructions

Cut 6 pieces of green ribbon 4 * 2.5 cm into a dome, singe from 2 sides to create a wave - these will be leaves. Bend the bottom edge in two places, glue in the center to get a concave even part.
Cut 12 pieces of white ribbon 4*2.5 cm and 5 pieces 3.5*2.5 cm in a semicircle, singe, glue into a droplet.
Glue 5 blanks together by overlapping each other, decorate with stamens.
Repeat for 14 rose petals from 4.5 x 2.5 cm pieces.
Round off the first layer of white details, glue the remaining petals, make the second layer around the circle from pink elements. Glue on the leaves.
Make 5 similar blanks.
Bend 4 pink segments 10 * 5 in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
Fasten 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm with a white overlay on the pink layer, form a fold, decorate the bottom with beads. Glue the bow, masking the middle.
Glue felt circles with a diameter of 3.5 and 2.5 cm to the back of the bow and flowers, sew all the elements onto the sewn lace elastic. Decorate the bun.

Bow decorations look spectacular on the hair, which can be made by following the instructions:

Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long; 1 ribbon 8 mm wide and 50 cm long.
Make 2 cardboard templates in the form of the letter P, 6 and 8 cm in size, cut off the edge of the wide ribbon along the oblique, lay it on a large template so that the cut and 2 folds are from each edge.
Fasten the ribbon in the center with pins, sew a “needle forward” seam, assemble, fasten.
Repeat for the second bow, sew together, attach a bead in the middle.

Elastic band on a felt basis

This option is suitable for beginner craftsmen, since making such a craft is quite simple. As a basis, take a small circle cut out of felt. In this case, we can see that yellow was used in the sample in the photo below. To decorate the gum, you need to prepare many identical pieces of pink ribbon, a package of small decorative lace flowers, beads to decorate the middle and a fluffy white pompom.

The decoration of the product begins with the attachment of pieces of tape bent with loops. First, the edges of the tape must be melted with a candle or a lighter so that the threads at the edges do not subsequently fall off. You can grab the loops with stitches to the base of felt or glue with a glue gun. The next step is to place the flowers close to each other along the inner circumference so that the ends of the ribbon are not visible.

Do-it-yourself elastic bands from satin ribbons - how to make a beautiful kanzashi decoration step by step with a photo

To make such an elastic band for hair, a thin fabric of any shade will do. The manufacturing process is very simple:

Cut a strip 5 cm wide, up to 10-20 cm long (depending on how lush you want to decorate the flower).
On one side, cut the strips along the entire length according to the fringe principle - these will be the petals.
Take a needle and thread and collect the entire strip on the thread from the side where there are no cuts.
Tighten it so that you get a circle with petals on the outside.
Tie the thread and sew the edges of the fabric.
In the center, you can insert another of the same strip of this or any other color, or decorate with a bead of a suitable size.
On the reverse side, attach a thin elastic band to the flower, with which you will tie the strands. For this purpose, rivets or a small flap of fabric are suitable.

This decoration is more suitable for girls and will become a wonderful gift or holiday accessory. To understand how to make such a hair band with your own hands, read the instructions below:

Take a pink satin ribbon 2.5 cm wide and use a ruler and a burner to make 5 strips 7 cm long.
Do the same with tape. purple hue 5 cm wide, but the length of the strips should be 10 cm.
Fold the ribbons of the same color in half and successively sweep all the details onto one thread and tighten so that you get a circle (do this from the side where the edges of the ribbon meet). So we get one circle of petals.
Do the same with the ribbons of the second color.
Glue one flower to another, and a button in the middle.
On the back of the flower, glue a clip or elastic band that will hold the bundle of strands well.

What styling does not go out of fashion, what can be built with the help of the usual rim (also known as a "hoop") - this is what most of the fair sex is interested in. The headband hairstyle is still in fashion, so it will never cease to be relevant!

What is the use of the bezel:

1. Masks imperfections. Didn't have time to wash your hair or were you too lazy? No problem! A voluminous headband will help mask this "flaw" and no one will even see that the hair is not too fresh!
2.Versatile and accessible. This accessory is an affordable item if you search well. Therefore, stock up immediately for all occasions: for all the outfits from your wardrobe!
3. P suitable for any experiment. With such a decoration, you can put any experiments, something original, yes it will work! For example, you can choose and braid a spikelet hairstyle, and decorate it with this stylish attribute. If you choose a headband with an elastic band, then there are countless variations of hairstyles for any celebration! All you need is time, patience and a desire to build something like that on your head.
5. K comfortable. If you have a headband that is made of soft material, then you don't have to worry about it causing discomfort to your head.

DIY ribbon hair band is a great little gift for your daughter. And if your girl is over 9 years old, recommend that she familiarize herself with my master class.

Thanks to detailed master class, you can make a beautiful hair ornament with your own hands.

To create an ornament you will need:

scrunchy;
purple cabochon;
scissors;
ruler;
satin ribbons 25 mm wide, purple and lilac;
thread and needle for handmade;
glue;
lighter.

Work should begin with the manufacture of individual parts. From lilac and purple ribbons, it is necessary to prepare 4 pieces, each 16 cm long.

Taking one piece of each color in your hands, you should fold their wrong sides together.

Placing the purple part on top, you need to connect the slices of the double part. It is important not to twist or twist the tape. The result is a long and narrow loop.

Continuing to hold the aligned sections with your fingers, it is necessary to bend the upper part of the loop, folding the part in half.

In this state, the part must be secured with a pin. And immediately you need to prepare the second same part, completely repeating each action.

The resulting two parts should be manually stitched with a regular needle and thread. You need to sew with small stitches, trying to capture all layers of the tape at the same time. In this case, both blanks must be sewn together with one thread, without breaking it.

Then the resulting line should be pulled tightly, collecting the edge of the tape in small folds. After that, you need to make a few fixed knots with a needle and cut off the excess thread.

Now, using a lighter, you should carefully and carefully melt the sections of the tapes.

It turned out half of the bow, now you need to make the second part, completely repeating the previous steps.

The resulting halves should be joined together, gluing the stitching points of the parts.

Now the purple ribbon should be twisted into a tube and wrapped with glue around the place where the two halves of the bow are fastened.

On the wrong side, in the center of the bow, you need to attach the prepared elastic band.

It remains to add a purple cabochon to the middle of the bow and smooth the edges of the ribbons.

A lush and beautiful bow is ready!

Today I will show you how to make a satin ribbon flower. You can decorate with this flower the same hair band, hairpin, gift wrapping.

To create a rubber band you will need:

glue gun;
light pink cabochon;
scissors;
scrunchy;
felt circle;
satin ribbon with a width not exceeding 25 mm, lilac;
pink satin ribbon 40 mm wide;
a lilac-colored satin ribbon with a width of at least 50 mm;
lighter.

From a lilac ribbon 5 cm wide, squares with sides of 50 mm should be prepared, in the amount of 18 pieces.

From a pink ribbon, you need to make squares with a side of 4 cm. You will need 12 pieces of such parts.

From the narrowest of the prepared tapes, you need to make 11 parts.
Now you can start creating petals from all kinds of prepared squares. Taking one square, it must be carefully folded into a triangle, bending the part along its diagonal.

Having placed the fold strip horizontally towards you, you need to tuck one edge to the middle and pinch it with your finger.

Then you need to repeat the action, but with the second side of the fold.

The result is a square blank, the two sides of which consist of connected sections. They should be carefully singed with fire so that each layer of the tape is processed and soldered together.

Carefully repeating each step, it is necessary to process the remaining large lilac squares.

Then repeat the process with pink details, getting slightly smaller details.

Particular care must be taken when processing the smallest squares of lilac ribbon. It is important to ensure that the tape does not deform or burn, and the edge remains even.

Now you can connect the parts into an ornament. First you need to put together large parts. It should be glued by laying them one on top of the other, slightly hiding the singed cut under the fold strip.

Gradually attaching the petals, it is necessary to form a circle and fasten the first tier of the decoration with the last detail. The result is a circle of 18 large lilac petals.

Then you need to make a circle of medium-sized pink details. You need to glue them the same way as lilac petals. The result is a circle of 12 parts.

And only small details remain, from which it is required to make the same circle, but already from 11 petals.

Now you need to connect together all the prepared circles. You should start with the largest, gradually moving to the smallest. First you need to glue a large lilac circle and pink, combining their centers.

Then you need to attach a small lilac circle, placing it strictly in the center of the pink circle.
On the underside of the circles, you need to attach a small circle of felt, which will hide the intersection of the circles and their details.
In the center of the attached circle, attach the prepared hair tie.

It remains to complement the front side of the jewelry with a lilac cabochon and correct the folds of the petals.

The decoration is ready and now you know how to make a flower from a satin ribbon! You can watch the video.

Read my tips on what else you can do with ribbons with your own hands.

Give each other gifts on the day of the holiday and just like that for no reason.

Sincerely, Natalya Krasnova.

Making beautiful hair bows with your own hands: 13 types of hair accessories

On this moment long-haired girls are increasingly wondering how to properly sew an elastic band for their hair. In such a situation, women use various devices, including hair ties.

Homemade hair bands will always be distinguished by their originality

Women either buy elastic bands or make them themselves - option 2 is more attractive. An elastic band for hair consists of various improvised materials: fabric, ribbons, knitting threads, etc.

At the moment, women use various ways to create rubber bands - as a result, every girl can sew beautiful hair bands with her own hands.

This material talks about how to make an elastic band for hair, and also discusses popular elastic bands for hair.

When creating the basis of an elastic band for hair, a girl uses the following materials:

When making the base of an elastic band for hair, a woman performs the following actions:

threads that match the color of the fabric;
a piece of fabric that is 3 times longer than the rubber band, any width;
linen rubber band (20 cm);
picks up a prepared piece of fabric, folds it lengthwise - in half and stitches its edges;
then folds the stitched piece with holes - one on top of the other - and stitches its edges. At the same time, the girl leaves a hole through which she then turns the cut inside out;
twists the cut and inserts an elastic band from linen into it;
tie a rubber thread and sew up the hole - and the base is ready!

WATCH THE VIDEO INSTRUCTIONS

Currently, girls make various types of elastic bands.

Many girls love to be the center of attention. In a similar situation, women use fashionable elastic bands for hair.

When creating a fashionable elastic band, a girl performs the following actions:

the future bow is placed in a rubber thread,
ties - and an elegant hair product is ready!

When going to a restaurant and other institutions, the girl uses an elegant hair band.

In the manufacture of such a product, a woman uses the following materials:

inserts the wire into the hole;
cuts 2 ovals from the fabric, which are then sewn along the edge and leave a hole;
various beads and crochet hook.

When creating an elegant rubber thread, the main thing is to tie the warp correctly. As a result, you should get a voluminous buttonhole stitch.

While weaving, the woman adds beads. Seamstresses also add beads after weaving - in a similar situation, the girls pull a thread through an elastic band and hang beads on it.

In the manufacture of gum "Five-leaf flower" a woman performs the following actions:

winds a circle around the edge;
as a result, he sews up the circle and makes, moving from the center, tightening.

Such flowers are fixed on bandages for babies and girls. In such a situation, the girl takes several circles of various sizes, cuts them along the edge and burns them.

At the end, the woman fastens the mugs in the center with a bead - and the five-leaf flower is ready!

If a girl has original buttons available that do not fit the clothes, but they can also be used! In such a situation, a woman takes a rubber thread, a button and sews the rubber band to the button.

If the buttons are small and the base is wide, then the girl makes a beautiful button decor. In such a situation, a woman can use various female devices: ribbons, rhinestones, etc.

When making a rubber thread with lace, a woman follows the same procedure as when creating the basis for an elastic band. However, in this situation there is one difference: after stitching, the girl does not turn the workpiece inside out.

As a result, lace elastic bands give the girl a little playfulness.

A lot of girls saw the cartoon "The Nightmare Before Christmas". The main character of this picture is Jack.

In the manufacture of gum "Jack" the girl uses the following materials:

standard thin rubber band for hair;
cosmetic felt-tip pens (for the face);
other necessary devices.

When creating a rubber band "Jack", a woman performs the following actions:

attaches accessories and ribbon bows to the hair;
then he makes Jack's face - a circle of fabric, which the girl fills with padding polyester and paints - and the Jack gum is ready!

To make the gum “Hare ears”, the girl makes a pattern:

picks up the base for the rubber band;
ties his ears in a knot around the base - and an elastic band " Bunny ears» ready! A girl with such an elastic band on her head looks femininely cute in spring.

Photo of other rubber bands with my own hands

In addition to the above home-made products, girls make such rubber bands with their own hands:

elastic bands for hair.

The elastic band looks very attractive and gives romance to the girl

Also, many funny rubber bands can be made from felt - similar products also decorate girls.

As a result, every woman can independently make this or that hair band - to accomplish a creative feat and significantly transform her appearance.

All materials are provided for review. Before using the recommendations regarding the health of your hair, we recommend that you consult with a specialist. The use of site materials is allowed only with an active hyperlink to the site.

Before you make your own scrunchie, think about what color ribbons you will need so that the product is in harmony with clothes and accessories. To make such a beautiful bow, as in the photo below, you need to buy a wide and narrow ribbon of light chocolate color and white organza. To connect all the layers of the craft, a beige button was used, on which you can glue a bright crown with rhinestones.

Begin work on a wide ribbon. Do not cut off the segment immediately, so as not to be mistaken. It is better to first fold the bow, consisting of several turns, leaving small beveled edges at the beginning of the work and at the end. Melt them immediately so that the cut sides look neat and the threads do not fall off when using an elastic band. At the central point, make a few stitches with threads matched to match, thereby fixing the bow.

Before you make a beautiful scrunchie as in the photo below, pick up a wide and thin ribbon in white and medium width with a contrasting pattern. The central holder of all layers is a bright red heart.

The long ends are left only on a thin ribbon located on top of two bows. 3 beads are strung on each hanging edge, matched in the same color scheme as the ribbons. The edges are tied into tight knots so that the beads do not fall off when moving.

How to make small hair ties so that they look spectacular? The kanzashi technique will help. This is the manufacture of beautiful floral elements from simple satin ribbons. Flowers consist of 5 identical petals (two white and three red) and two green ribbon leaves. Let's see how to make such elements.

Between them, place a central brooch with shiny rhinestones and a beautiful bow can be installed on an elastic band.

The simplest do-it-yourself velvet gum

A wide velvet elastic band always looks very luxurious, and making it as easy as shelling pears:

Take 1 or 2 pieces of velvet fabric of any color. If you took 2 segments, cut out 2 rectangular parts of the same size from them and sew.
The width of the rectangles is the width of the decoration, the larger it is, the more magnificent the decoration will be, the length is 25-40 cm, so that you can arrange beautiful assemblies.
Pass a strong elastic thread inside, which will gather the fabric in waves and hold the bundle of curls well, and tie it.
Sew up the hole.
Straighten the decoration.

Rubber band made of plastic

This option homemade decoration for your hair will be a real find for fashionistas, as you can show your imagination without limit and do it every day new model. For this:

Take a piece of plastic.
Cut out a rectangular part from it and draw any pattern.
To fix the paint, cover the top of the pattern with clear varnish - you can also use it for nails. If you want to make the decoration more elegant, even glitter polish is perfect.
Wait until it dries, and then glue an elastic band to the plastic on the back, into which you will collect your curls.

Stylish elastic band

Leather jewelry looks very solid and stylish when the elastic band covers the hair bundle in several circles. If you just take a strip of skin, it will slide off, while causing constant inconvenience. Therefore, we offer a leather option that will definitely look extraordinary and will firmly hold the curls in a bun:

Take a strip of leather - at least 30 cm long.
Trim the edges "on the bias".
Mark the center of the strip, fasten an ordinary thin hair band with a rivet in this place on one side.

Craft for a beam

A beautiful elastic band for a daughter to put on a hair bun is made from different elements combined in one composition. These are white flowers in kanzashi technique, and large multi-layered details of contrasting colors. Arrange the assembled elements symmetrically, leaving room for a large bow.

The elastic band looks very impressive due to the combination of different types of petals and fabrics, but all the details look harmoniously together. Additional elements are blue beads and large rhinestones.

As you can see, it is not difficult to make a hair band with your own hands from ribbons and fabric. The photographs presented in the article will make it easier to bring the described work to life. You can vary and combine different types of parts in one product. The main thing is to choose fabrics and decorative elements that look harmonious together, then the finished elastic will turn out beautiful and tasteful. Good luck!

Tackle called " rubber» is widely used by anglers for catching various kinds fish. Its device is quite simple and does not require large expenditures of money and time. It is not only simple, but also quite compact. It can be placed in a backpack and safely go fishing. If you wish, you can collect several "gum bands", they will also take up some space.

If you have a boat, setting " rubber bands"does not require any effort at all, and the fishing range will increase several times, which can seriously affect its effectiveness, towards an increase.

Such fishing rods can have various design solutions, but the classic "gum" includes:

Main line.
Leads with hooks.
Rubber shock absorbers.
A piece of nylon cord with a load.
Bite alarms.
Ropes with a float.
Reeler or short rod with reel.

And now about everything in more detail

main line, with a diameter of 0.2 to 0.4 mm and a length of about 10-15 meters, is selected depending on what kind of fish is supposed to be caught. If it is crucian or perch, then you can take a thinner fishing line, and if it is carp or pike perch, then the fishing line should be more powerful. As a rule, monofilament fishing line is used.
Leashes are performed with a less thick fishing line than the main one. This is done so that in the event of a hook, you do not have to tear the main fishing line. The length of the leashes can be different, even on the same "elastic band". The length of the leashes can vary from 10cm to 70cm. This is done in order to make the tackle more versatile, but, as a rule, fishermen install leashes of the same length on an elastic band. In this case, hooks of various sizes can be used. This is done so that you can quickly change from maggot fishing to worm fishing.
For rigging "gum" better fit rubber shock absorber round in cross section. Its length is selected depending on the fishing conditions, while it should be borne in mind that the elastic increases in size by 3-5 times.
So that you can throw the tackle without problems and far, it is attached to the end of the gum cargo on a nylon cord, about 1 meter long. The load can be factory-made, cast from lead, or home-made, for example, from a piece of brick. As a rule, its weight is within 1kg. This is necessary so that he can keep the tackle in one place.
To see the moment of bite, you should install on the tackle signaling device. The simplest signaling device is made from a segment of a thin willow branch, which is what almost all fishermen do. But you can also use an "advanced", electronic signaling device. In any case, it is necessary to make cuttings at the right time.
Float with rope It is applied in the event that the gear is installed from the boat. The float will serve as a kind of beacon, indicating the place of lowering the load. The presence of a boat makes it possible not only to increase the fishing distance, which is important, but also simplifies the process of removing gear.
"Elastic band" is stored and transported on a small winder, about 50 cm long, made of wood or foam. best material for this, plywood is used, with a thickness of 5 mm or more, since it makes a very durable reel. Alternatively, you can use a short rod with a reel. Few people use this method, since it is difficult to wind a fishing line with an elastic band around the reel, but it is even more difficult to unwind it, since the elastic band is stretched.

How to make a rubber band for fishing with your own hands

It can be easily assembled at home, but you should not do it directly on a fishing trip. Although the tackle is simple, it requires a certain amount of time for installation, and there is not enough time for fishing anyway.

To assemble the "elastic band", you need to do the following:

First you need to take piece of monofilament line with a diameter of 0.25-0.5 mm and a length of 15-50 mm, at the end of which a loop is made for attaching a rubber shock absorber. Then, having measured 20-30 cm from the loop, 5 more loops are made (maybe more), at a distance of 40-50 cm from one another.
A load is taken and tied to a nylon cord. A loop is also made at the end of the cord. The length of the cord can be different, but not more than 1m. The main thing is that with its help it is convenient to throw the load.
After that, you can connect the load with a rubber shock absorber, and a rubber shock absorber with the main line. I must say that the tackle is ready. Leashes are installed on the "elastic band" when it is thrown into the pond. The easiest way to fasten the leashes is with the loop-in-loop method, but even easier if each leash is equipped with a small carabiner. Then the installation and removal of leashes from tackle can take quite a bit of time.
For storage and transportation, "gum" must be cut with a jigsaw, from plywood reel, which has a sharp point at one end. It allows you to stick the reel into the ground near the reservoir, which makes it possible to keep the tackle in one place and not look for ways to secure it.
Determine bites you can visually or put your hand on the fishing line, but this is not very convenient. You can use a bell or a split thin branch. Such a signaling device, very simple, but at the same time, quite reliable.
If there is a boat, then the cargo can not be thrown, but delivered to a certain distance. In this case, you can use a float with a rope, which is tied to the cargo and shows its location. After the end of fishing, with the help of a boat, the load is very quickly pulled out of the water, after which the “elastic band” is also quickly wound onto a reel. It takes very little time.

What types of fish can be caught

This type of this tackle is capable of catching any fish, depending on the type of nozzle. "Rubber" can catch:

Chekhon.

The only thing is that for each type of fish it is necessary to modify the equipment. "Elastic band" is widely used for catching crucian carp. To do this, it is enough to have a fishing line, 0.2 mm thick and leashes, 0.15-0.18 mm thick. If the “elastic band” is completed for pike perch, then the thickness of the fishing line is selected at least 0.3-0.4 mm with leashes 0.25-0.35 mm. Hooks, in this case, are selected depending on the size of the live bait.

When choosing the diameter of the main line, one should take into account the fact that after the end of fishing, you will have to pull the load from the reservoir, and if it is far away, then the load on the main line can be significant. Therefore, many anglers use a fishing line with a diameter of at least 0.5 mm to equip the “gum”, and adjust to the fishing conditions by replacing the leashes. And if suddenly, there was a hook, then a thin fishing line is unlikely to help with it, but with the help of a fishing line with a diameter of 0.5 mm, you can also pull out a good log.

The process of fishing on the "gum"

"Rubber" can be attributed to one of the most effective gear. In the midst of a good bite, you can pull out several fish at a time. The fishing technique is quite simple and includes the following steps:

Upon arrival at the reservoir, the tackle is unwound on the shore and a load is attached to the elastic band with the help of a nylon cord. After that, using the dexterity of their hands, the load is thrown as far as possible into the reservoir. At the same time, you should hold on to the cord, but not to the rubber shock absorber.
At the next stage, leashes are attached to the main fishing line. Then, in turn, bait and tackle are put on each hook of the leash, and under the action of a rubber shock absorber it is sent into the water column.
After that, a small tightness of the fishing line is made and a bite signaling device is installed.
As soon as the fish starts to peck, which will be indicated by the signaling device, you need to cut.

Hi all! My friends, although it is not spring yet on the street, the time is not far off when we will all walk around without hats. It is worth taking care of how your little head will look in advance, especially if you have very long hair. That is why today we will make hair ties with our own hands!

We will move, so to speak, from the most elementary to something more complicated. In any case, you will definitely cope with all types of these rubber bands, because I will describe in detail how to make each of them.

In fact, there is simply incredible great amount ideas for creating rubber bands (and not only). And almost every one of them can be realized with the help of simple manipulations. In general, I will show you a lot of hair accessories. Sit back, I'll open the door for you to the amazing (actually!) world of hair accessories (no matter how strange it may sound :))

Before you get started, take a look here. Come back when inspired :)

Scrunchie base or the simplest model

In order to make the base, you will need first of all:

underwear or just a thin elastic band (15-20 cm);
a piece of fabric (the length is about 2-3 times greater than the length of the elastic band, the width is arbitrary);
threads in the color of the fabric;
needle;
pin;
scissors.

Take the prepared piece of fabric, fold it in half lengthwise, sew along the edge. Then fold the stitched piece with the holes facing each other and sew along the edge, leaving an opening to turn inside out. Turn out the workpiece.

Now insert the rubber band. Tie it up, sew up the hole. That's all. Such a model can be used as an independent product or as a basis for a more sophisticated elastic band.

DIY hair bands: master classes and photos

How many rubber bands can be made, you simply cannot imagine! Now let's look at the options for elastic bands that can be made without even having serious knowledge in the art of sewing.

Four Variations

To plunge into creativity right away, I suggest you look at these four options for rubber bands. One way or another, you can find each of them in my articles about homemade gifts. At the end of the article, I just give links to those master classes.

In short: bows are made with multiple folds. In the first case, several ribbons are folded, and in the second, the folds are formed from one strip. The flowers are assembled from a heavily gathered ribbon glued to a base circle. In the latter case, a bow is also placed on top.

Here is another version of the bow:

Beautiful and fashionable

I see this model very often now. Want to be the center of attention? Then make this beautiful and catchy hair band. Prepare a piece of fabric, wire, warp and thread with scissors.

Cut out two ovals from the fabric, which are sewn together along the edge, leaving a hole. Put a wire in there. Place the future bow in an elastic band and tie.

elegant

It is not a shame to wear such an accessory for the evening. For it, prepare the base, shiny (optional) yarn, various kinds of beads and a crochet hook (although if the yarn is thick enough, you can handle it with your hands).

The most important thing here is how to tie the base. I don’t know what this type of strapping is called correctly, but it reminded me of a voluminous looped seam. In the course of weaving, gradually add beads (this can be done later by pulling a thread through the elastic band, gradually stringing them on it).

Children's rubber bands for little girls

A five-leaf flower can be created by a simple operation: take a circle, sweep it along the edge, pull it together and stuff it. At the end, sew up and make a few tightenings from the center.

Such flowers are very fond of attaching to bandages for newborns and, in general, for small children. Take some laps different sizes, make cuts along the edge of them and burn them. It remains only to fasten in the center with a bead.

Button happiness

Are there a few original buttons that are definitely not useful for clothes, but do not give rest to your creativity? Then let them go! Everything is as easy as shelling pears: take an elastic band, a button and sew one to the other. If the buttons are small and the base is wide, then you can simply make a button decoration.

All sorts of additional decorations are welcome: ribbons, rhinestones, etc.

Lace elastic

An elastic band can be sewn in the same way as the basis for an elastic band, but with one difference: after stitching, the woven blank does not turn out. With the help of lace, a very light and playful look is obtained.

The second option is with lace: this time only a flower is made from this wonderful material, and not the entire elastic band. To do this, it is enough to pick up the lace and sew it in the center, the rest is a matter of decor.

Elastic band "Bow"

An elastic band with a bow can be sewn from absolutely any fabric! I decided to experiment with fur

Below I decided to show you on the diagram how I made the bow. First, you make the base for the elastic band, and then for the bow, take a wide strip of fabric, sew it in half (as well as for the base).

Then sew the ends of the bow, folding the workpiece in half again. Turn the elastic inside out and tie it in the center with a strip of fabric.

It turns out this cuteness:

From the usual cotton fabric will result in the following:

Elastic band "Hare ears"

Somehow I wandered into free master class within the framework of the BiblioTime project (told about it). The topic of the handicraft meeting was rubber bands. But if everyone decorated the cut with beads, then I decided to excel, remembering the “eared” specimens.

Unfortunately, I don’t have photos of that product, but I can tell you about the creation of an elastic band with ears

To make such an elastic band, you will need a pattern:

Again, you need a base for the gum. The ears are tied with a knot around her and a romantic and girlishly gentle image is obtained. What you need for spring

Elastic band "Jack" ("Halloween")

How to make an elastic band for hair? This question is often asked by girls with long hair. A variety of elastic bands are able to modify the hairstyle, they can be chosen both for everyday outfit and for an evening out. There are options for little girls and schoolgirls, and there are original products for adult ladies.

Our article is about how to make a hair band with your own hands. The basis of any product is a purchased simple elastic band without any decorations and decorate it depending on the wishes, the chosen color and style. You can wrap the elastic completely with fabric, or you can only add a central decorative element made of fabric, ribbons or lace. Often a bright brooch or button, beads or rhinestones are sewn into the middle. Consider some interesting ideas on how to make an elastic band for hair in different ways.

Elastic band on a felt basis

Contrasting bow

Before you make your own scrunchie, think about what color ribbons you will need so that the product is in harmony with clothes and accessories. To make such a beautiful bow, as in the photo below, you need to buy a wide and narrow ribbon of light chocolate color and white organza. To connect all the layers of the craft, a beige button was used, on which you can glue a bright crown with rhinestones.

Three-layer bows with beads

Kanzashi flowers

How to make leaves

After making the main flower for the elastic bands for the girl, get to work on the leaves. To do this, you need to fold a green ribbon 10 cm long in half. We leave the bent edge intact, but draw a straight line from one of its corners to the opposite on the other side and cut it with scissors as planned. Get a triangle. Again, the cut edges are melted and pressed against each other with tweezers or fingers. Hold a little and they are securely glued together without glue.

It remains only to turn the blank to the other side and attach the leaves under the previously made flower. Here you can use a glue gun to glue the parts together and attach the decoration to the elastic itself.

Bow of kanzashi petals

Between them, place a central brooch with shiny rhinestones and a beautiful bow can be installed on an elastic band.

Craft for a beam

As you can see, it is not difficult to make a hair band with your own hands from ribbons and fabric. The photographs presented in the article will make it easier to bring the described work to life. You can vary and combine different types of parts in one product. The main thing is to choose fabrics and decorative elements that look harmonious together, then the finished elastic will turn out beautiful and tasteful. Good luck!

Elastic band on a felt basis

Contrasting bow

Three-layer bows with beads

Kanzashi flowers

How to make leaves

Bow of kanzashi petals

Craft for a beam

Elastic band on a felt basis

Do-it-yourself elastic bands from satin ribbons - how to make a beautiful kanzashi decoration step by step with a photo

What is the use of the bezel:

Making beautiful hair bows with your own hands: 13 types of hair accessories

The simplest do-it-yourself velvet gum

Rubber band made of plastic

Stylish elastic band

Craft for a beam

And now about everything in more detail

How to make a rubber band for fishing with your own hands

What types of fish can be caught

The process of fishing on the "gum"

Scrunchie base or the simplest model

DIY hair bands: master classes and photos

Elastic band on a felt basis

Contrasting bow

Three-layer bows with beads

Kanzashi flowers

How to make leaves

Bow of kanzashi petals

Craft for a beam

Similar articles