Cognac decor with clay and leather trim. Fitting volumetric forms with leather

Master class on decorating a bottle with leather with your own hands - the second life of glass containers

To decorate the bottle with leather, you need:

• Glass bottle;
• natural leather of dark color;
• centerpiece for decoration;
• transparent universal glue "Dragon";
• scissors;
• wire cutters or scissors.

If this is your first time working with leather, read about this type of needlework and its nuances in our article.

Prepare your decoration. It could be semiprecious stone flat shape, a coin, a large beautiful button or, as in this case, a brooch with a broken clasp.

Use wire cutters or construction scissors to separate unnecessary parts from the back. If suitable decoration no, it's okay, this element can be abolished.

Prepare a glass bottle of any shape, preferably smooth, without reliefs on the surface. When decorating a bottle with leather with your own hands, for the first time, take a vessel with a capacity of half a liter. A smaller size will require too painstaking and delicate work, and a large one is fraught with increased consumption of leather.

Soak and remove all paper stickers from the glass. Let the workpiece dry, and to degrease the surface, wipe it with alcohol or vodka.

On the main part of the figure, make a flat leather background. To do this, apply glue to a piece of a suitable size from the wrong side. Well coat the edges of the leather flap.

Glue the skin to the bottle. Fasten the piece from the center to the edges, while pulling the material. Thus, the decor will repeat the curves of the bottle. If you don't have a suitable sized flap, you can use two pieces. Please note that the porous structure quickly absorbs glue, and the plastered pieces must be glued immediately.

For convenience, you can apply glue to the edges of the flap and to the surface of the glass.

For the neck, choose a longer and narrower stripe. Try wrapping this strip around your throat to get an idea of ​​where to wrap the decor and where to fold. Then apply glue to the skin and decorate the top with it.

Apply glue to the skin. Bend 5 millimeters inward.

Glue the remaining piece, starting from the neck. Attach it like you're wrapping a scarf around it. Slowly, fix one side of the leather "scarf". Bend the material in the direction you want, but this time do not pull so that you have the opportunity to lay out the folds with your fingers.

Glue the top edge of the second end of the leather "scarf". Attach the central element of the skin for the decoration of the bottle and form folds around it, finally gluing it.

Cut a rectangle according to the size of the perimeter of the bottom of the neck. Lubricate it with transparent glue and bend it to the wrong side 5 mm in advance. Glue the folded edges additionally.

Close the top with a leather rectangle.

Glue a brooch or other decoration to the center of the leather bottle.

While the craft dries, wrap the cork. From the wrong side of the leather patch, circle the top with a pen. Add the height of the visible part of the cork to the radius and cut out the circle.

Coat the circle with glue. Put the cork in the center. Holding the cork to the skin, wrap it inward by 5 mm and additionally coat them with glue.

Glue the entire piece to the top of the lid while making tight folds to make it neat.

After drying, the bottle with leather decor can be used for its intended purpose or saved for a gift. Both a woman and a brutal man will be equally delighted with such a present.

If necessary, pour the liquid should use a watering can. So that the souvenir does not deteriorate, you should not keep it in very warm rooms.

If you were inspired by a master class on decorating a bottle with leather, see how else you can transform unnecessary bottle containers and jars. And if nothing works out with needlework, try canning decoration or use cereals and legumes to fill.

We hope to see you tomorrow, join us at in social networks to be the first to know about the publication of new MK.

When, after the next holiday, you cannot throw away the bottle because the shape of the vessel is very interesting, it means that the sense of beauty has defeated the arguments of reason or there is already an idea for decoration.

Your soul needs a creative act - decorating bottles with your own hands.

At your service there is always a master class in the society of a master or an Internet version of the work process. Ideas for decoration can be seen on forums where needlewomen share their achievements. A simple way to decorate is decoupage with a photo. After processing, a picture, photograph or postcard is glued onto the bottle. There are many techniques and master classes where bottles are decorated with twine, salt, leather, ribbons and even tights.

We paint the bottle

In order to feel the taste for decoration, simple manipulations with the object are enough. Do-it-yourself elementary decor of glass containers is done with the help of paint. A transparent object can be painted inside or outside.

For internal coloring, pour acrylic paint into the bottle using a syringe without a needle and rotate the bottle to achieve a dense internal coating.

As interesting idea you can paint the inside of the container in several colors. To do this, each color layer should not cover the entire surface, but only a part. The colored decor of the bottle adds mood to the interior.

Outside, the bottle is painted with a sponge or brush. Pre-treat the vessel with alcohol and apply acrylic paint with tangential movements. Buy a few toners for white acrylic paint or use gouache - mixing colored toners with a white base, get the right shades and make a colorful bottle decor.

Painted bottle - the basis for decor

You can quickly decorate a bottle of interesting shape with your own hands with ribbons and lace. Make a small bow out of ribbons, sew them on a lace base, add a brooch, beads and put on the neck of the vessel - an exclusive decor item is ready!

A bright and sparkling effect is achieved with improvised materials, for example, salt. Treat the prepared bottle from the outside with glue and sprinkle with salt with large crystals, carefully place on a flat surface until completely dry. It is appropriate to decorate an object with salt for a winter interior or a New Year themed one.

If a solid layer of salt seems boring or you need to decorate several areas with salt, then glue only those places where sparkling is needed and cover with salt. A master class on this topic will help in mastering the technique.

More about decor

Even just by painting the bottle with your own hands, you can achieve an incredible effect of silver or gold gloss, shimmering with lights. New Year's fairy tale, sequined carnival or vintage treasure.

To get a stylish effect of gold / silver plating on a future art object, it must be prepared. Preparing glass for subsequent decoration with your own hands, at the initial stage, is the same for any method of painting: the object should be washed, dried, degreased and treated with a universal primer.

The prepared glass vessel can be painted. For these purposes, automotive paint in a can is suitable. It should be sprayed at a distance of 15 centimeters from the object, outdoors or on a balcony.
If you don't have a spray can, get gold/silver acrylic paint from hobby stores or a hardware store. Use a sponge to apply. It should be painted with point (plugging) movements, leaving a trace on the surface, and not a strip, the surface will turn out to be even, without streaks.

Gold, like silver, is colored, i.e. has several shades, which makes working with these paints exciting.

You can add decor in several ways. For example, wrap the thick part of the container with lace, securing it with a glue gun. Or partially wrap with twine, colored threads, beads. Stick on hearts or ribbons. Decorating bottles is a fun activity, and you can use all the materials at hand for every idea.

Decoupage of bottles with napkins (master class)

A popular technique for decorating bottles is decoupage. Visit a decoupage master class and you will appreciate the technique in full.

Simple manipulations with napkins, decoupage cards or printed pictures allow you to get a charming decorative item of exclusive design.

The easiest way to decorate an object is to paste a cut-out picture. To get a taste for handmade, visit a master class on the technique of interest and find ideas. Prepare the container as mentioned above, choose the plot you like (from a postcard, magazine, decoupage card), cut it out and stick it on the surface. Add accessories, brooches, beads, ribbons by gluing them with your own hands using glue gun. Sometimes this is enough.

Decorating bottles with a more fundamental approach requires preparation, a master class will always come in handy. For the technique in the classic version, a colored layer of a napkin is used. That is, only a layer with a pattern is required from a three-layer napkin, the class of the napkin is also important - it must be with a bright pattern.

For work you will need:

• decoration object;
• universal soil;
• acrylic paint white and colored;
• toners or artistic gouache;
• acrylic lacquer(artistic or building;
• brushes, sponge for plugging;
• patterned napkin.

Stages of the master class:

1. Prepare a glass container (wash, degrease, prime).

1. Paint the bottle to be decorated with white acrylic in two layers by tamponing with a sponge. Dry after each application.

1. From a napkin, cut out a pattern with nail scissors or tear along the contour. If the drawing is on a white background, you can deviate from the contour, the white part of the napkin will merge with the background on the subject.

1. White color is not always suitable for your idea and therefore any other color can be applied on a white surface. If you are new to decoupage, use light, creamy shades to add color. With dark background for napkins required extra work. Dry the surface.

1. Attach the drawing with a colorful layer up and apply acrylic glue on top of it with a brush (acrylic varnish can be used), try to avoid wrinkles and bubbles. You must act quickly and carefully. Dry.

1. When you have glued all the drawings, you can proceed to the final design. Decoupage of bottles is completed by applying three layers of varnish with drying. With fine sandpaper, it is necessary to sand the surface and cover with a final layer of varnish. DIY bottle decoration is complete!

Not only decoupage

Having mastered the simple decoupage of bottles with napkins, you always want more. The smooth surface of the bottle does not give a texture, with the help of which a more interesting effect is achieved. You can create an interesting surface with tights or stockings. A master class on this type of decor can be found on the Internet.

To do this, cut off one part from a pair of tights, soak it with a mixture of PVA glue and water (proportion 1 to 1) and put it on the bottle. Lay out coattails, waves, any texture.

Instead of tights, you can use decoupage with a cloth, the procedures for materials and techniques are similar.

Leave a few places flat to stick the napkin on. Dry completely, prime with special compound or acrylic paint. Now you can decoupage bottles, tint, embody your ideas or leave it as it is.

Another way to get texture: wrap the bottle with threads, colored threads for sewing of different thicknesses are quite suitable. Colored thread decoration is also quickly obtained when using cotton yarn for knitting.

Using alternate threads different color you can get a very stylish decor item, fix the threads with PVA glue. The decor of the bottles with twine, threads should be varnished and used as a vase, or you can prime, paint and stick napkins.

Leather for decor

Decorating bottles with leather is one of the most beautiful opportunities to recycle leftover leather or outdated jackets, boot tops and get an interior item for home decoration. You can decorate any glass surface with leather. To work, you need glue like "Moment", tweezers, scissors and a knife, as well as imagination.

To make folds, pieces of leather need to be soft. detailed wizard the class is in the global network. Spread a bottle and a piece of leather with glue, attach the skin to the surface and form folds.

Leather is a little more difficult to work with than decoupage of bottles with a cloth, but folds are also formed directly on a glass bottle.

The formed decor must be given time for final drying and, if desired, additionally painted, gilded, glued other elements - it all depends on the idea.

In the design for a piggy bank, coins are suitable, for a gift wine container, a beautifully made dense cork will not hurt, it is also trimmed with leather.

Don't throw away empty beautiful bottles, with their help you will create a unique art object for your home with your own hands. And it doesn’t matter if it’s decoupage bottle decor, leather trim or dyeing, uniqueness and creativity are the most important things in decorating.

Video gallery

Drink bottle - glass, leather and clay, handmade by Marino

I really love leather goods and have long dreamed of swiping at something global, such as a vase or a leather bag. But for now, I admire the work of other masters, I study their techniques and the possibilities of working with leather.

Today I want to offer a master class by a professional in my field, a member of the Union of Artists of Russia living in the city of Novorzhev, Pskov Region, Marino, whose work I have been following, inspired and admired for a long time.

The master class is based on the work of Marino and is slightly narrower (retelling in my words). Before your eyes, an ordinary forgotten wine bottle will become a masterpiece that can decorate your interior or play the role of an exclusive gift for connoisseurs self made, especially if you pour the appropriate content into this gift 🙂 So.
We will need: a bottle with a cork, large pieces of thin fair skin leather, clay or plastic (although you can make the model a little simpler for the first time) and a standard set of tools for working with leather.

Bottle with clay decoration - the first stage

Clay baked and secured with leather straps for decorating a bottle
First, grease the bottle with your thin technical vaseline and apply clay, after drying, adjust with a knife or file, bake and glue on thin leather straps(this is necessary for additional fixation of the clay area). You can, as I said, do without clay or plastic and just experiment with leather and gems, for example.



Next, we take the skin, draw a layout with a mandatory margin for the formation of folds and 1 cm for the hem. Cut out.



Coat the edges of the skin with Moment. You need to smear it with your fingers, this will guarantee that all holes and irregularities will be smeared (I always have a hedgehog board on hand on which I remove excess glue from my fingers and can pick up a drop with a needle and add it there). We also coat the glass of the bottle. We bend the collar and connect it tightly (I usually pass it with a hammer or roll it with a lead ball to evenly distribute the glue, but if you, like Marino, have pliers with smooth lips, you can walk through them). Then we coat the remaining surface of the skin, let it dry a little (no longer than 5-8 minutes) and proceed to the connection with the bottle.






On the go, form small and large folds (do not bubble too much). Don't be afraid if one piece isn't enough - leather loves to experiment and you too can use different skin tones and different pieces. There is no need to make folds at the junction of pieces of skin. Try to think through all the pieces step by step, which one after which so as not to inhale the glue and then tear off the unsuccessful blind man's blind man's eye from the bottle.




Where there are complex curves and relief, use smaller pieces. The detail on the neck is better, on the recommendation of the master, to make it in the form of a strip covering the entire throat.




Next, we process the cork - we glue it with leather on both sides, and close the junction with an ordinary strap (it is possible so that there is no thickness to tap it with a hammer on both sides before gluing).





But then the skin ends and painting begins. The master uses Karat paint, but it is also possible with sprays - you need to cover all areas evenly, including clay and cork, but not greasy, but in moderation.




Further, so that the product ceases to be embarrassing with the monotony of dark sides, we take acetone and a non-fluffy cloth and wipe all the bulges, giving the effect of aging and creating an author's design. Be sure to work in a respirator and ventilated area.


At the end, Marino recommends going over the product with wax, for example, there are special mixtures for cleaning shoes based on beeswax, which are colorless and quickly absorbed. That's all. By the same principle, you can create a vase for flowers, a chest for treasures and much more. The main thing is to always remember safety precautions and know what you want to get at the end of the process of creating a masterpiece. (well, at least approximately :))

In summer, flowers surround us everywhere, delighting with their beauty. But pansies are especially striking in their brightness and variety of color shades.
How to keep the impressions left from contact with summer bouquets for a long time? I suggest that you do original decoration for the interior with your own hands, which I called "Flower Fantasy".

Materials for work:
Empty bottle with screw cap and wide neck
Acrylic paint (blue, black, white, red, yellow), brushes
Cardboard, scissors, glue (any for skin)
Skin of several colors (green, white, red, yellow, different shades of brown skin)
Wire
Punch
Stationery clips
Two decorative stones
Candle or dry fuel tablets, tweezers
Work order
Wash the bottle well. With a felt-tip pen, we outline the areas on which the skin will be glued without drapery. Then we glue them with brown leather. (Photo 1)

Next, we begin to fit the bottle with skin, moving as if in a spiral. For a more interesting solution, we use different pieces of leather that are similar in color in the process.
We carry out the edging of the glued pieces. To do this, on a separate surface, we drape a small piece of skin of a lighter shade. The length and width of the required segment is difficult to determine exactly, everything is measured locally. But if you have non-closed areas formed during work, do not worry. This is always easy to fix by inserting the missing wedges. (Photo 2)

Having glued the draped piece to the bottle, we continue to wrap it with leather tape, only now more dark color. Here you can create folds on the skin directly on the bottle, after lubricating it with glue. (Photo 3)

For the resulting gap on the bottle, we cut out an element similar in shape and attach it to the surface. (Photo 4.5)

We proceed in the same way when making the neck of the bottle. (Photo 6)

Now let's take a look at the bottom. From the cardboard we cut out a circle equal to the diameter of the bottom of the container, and glue it on a leather circle of a slightly larger diameter. We bend the free edges inward. (Photo 7)

The bottom designed in this way is glued in the right place.
Finally, the turn of the most creative part of the work came - making flowers, and in our case, pansies. The flower consists of five petals, the widest being the lower one. (Photo 8)

Cut out of leather suitable color the required number of leaves and petals. Also, do not forget about the design of the central part of the flower and cut out 4 circles ǿ7 mm. According to the conceived sketch, for decoration I will use three flowers and leaves for the bottle itself, and one flower and an unopened bud for decorating the cap. (Photo 9)

Using red, blue and light brown acrylic paint, apply strokes on the petals with a dry brush. (Photo 10)

Then, with a thin brush, we draw wavy lines, first black paint and then white. (Photo 11)

For greater resemblance to a real flower, we decorate each leaf with thin lines in the form of veins. (Photo 12)

After the paint is completely dry, we burn all parts of the flower. Heat treatment will be carried out in 2 stages. To add volume, fold the leaf in half and fire along the fold line. (Photo 13,14)

Then we burn the edges. (Photo 15)

In the same way we process all the petals.
Collecting flower arrangement and decorate with two decorative stones. (Photo 16)

Next, we're going to cover the lid. We cut out a circle of a larger diameter than the size of the neck, and process it with scissors with a serrated edge. Along the edge we punch holes of different diameters, alternating them with each other. (Photo 17)

In the center of the circle, glue the lid and lightly collect the skin around the edges.
We prepare the parts of the bud. It consists of a stem wrapped with a strip of skin, a bud and a sepal. (Photo 18)

We pass the stem through the hole in the sepal and fix it on the bud. (Photo 19)

Next, together with the bud, glue the flower and leaves on the lid. (Photo 20,21)

The work is done! (Photo 22, 23)

The master class was provided by Zeyda Tatiana.

Unique design elements have always been valued for their special character, inimitable appearance, exclusivity. Decoupage of bottles makes it possible to create stylish and outstanding decor items with your own hands that can demonstrate the unique sense of taste of the owner of the apartment, his creativity. How to make bottle decoupage at home, and what design options are the most popular - read the article.

Decoupage can be done by hand on absolutely any containers, regardless of their material, size and shape. Both glass bottles from alcoholic beverages and containers for the manufacture of which metal was used (for example, flasks) are suitable for decoration.

Decoupage of glass bottles has several characteristic features:

1. The surface of the bottles must be prepared before registration: labels and glue are removed; irregularities, if any, are sanded; the surface is thoroughly washed, dried and degreased with alcohol, acetone, a special agent.
2. For the first layer of decoupage on glass, a primer is always used, which guarantees maximum adhesion of the surface with applications, allows you to use any colors and materials in the design.
3. Applications are attached to a dry surface, and the glue is applied from the center to the periphery. As applications, blanks for arts and crafts, drawings cut out from magazines, newspapers, books, etc., napkins, printed pictures, stickers, stamps, etc. can be used.
4. The finished product is covered with a finishing varnish-fixer for arts and crafts.
5. Sometimes the surface is polished with wax.

Decorations for decoupage of bottles can be very different: you can decorate the glass of the bottle with both traditional rhinestones, sequins, glitter, colored threads, etc., as well as non-standard materials (sea salt, pasta, dried flowers and dry grass).

Why use decoupage on bottles

Decoupage technology allows you to make a beautiful and unique decor element at home: decorated bottles can be used as a vase for flowers, a special container for storing holy water, an original vessel for olive oil.

Decorated bottles of champagne brought to the registry office for painting, in honor of the newborn's holiday, to discharge the child from the hospital, etc. create an appropriate festive atmosphere, and containers decorated in a certain theme are great gift for a professional holiday!

In addition, a decoupage bottle is perfect for congratulations on your birthday, anniversary, state and professional holiday. The main thing is to choose the right decor.

For decor gift bottle for the day of the border guard, as a decor, wood, drapery with fabric in military colors can be used. On the day of the fisherman, you can give bottles decorated with ropes, twine, applications with ships. For New Year's bottles, napkins with the image of Santa Claus and the Snow Maiden, decor with artificial cones, etc. are suitable. For the design of wedding bottles, kanzashi will be an ideal decor element.

Decoupage of bottles with your own hands: how to get growths

Often, volumetric elements are required for decoupage of a bottle. You can get growths on bottles in various ways. The best is with polymer clay. This method makes it possible to obtain a solid, convex element of any shape. Clay decorations are attached to decoupage glue, “Second”.

When working with polymer clay should be used special agent to soften, bake the material in the oven at 130 degrees.

Volumetric patterns on the bottle can be made with ordinary putty by filling an empty PVA tube and squeezing the material along the contour of the desired pattern.

After drying (about a day), the putty must be sanded: in this way, all irregularities and sharp edges are removed.

You can get voluminous details of the decor with the help of improvised means. For example, growths on a bottle can be made salt dough or pasta. The dough is kneaded from flour, glue, water, vegetable oil. Pasta is glued to the surface and painted in desired color.

Master class on decoupage bottles "houses"

With the help of growths, bottle-houses are decorated. In addition to the options described above, volumetric elements can also be made using foam (food packaging is suitable). In addition, for decoupage of "houses" you will need ice cream sticks, acrylic paint (for walls and roofs, windows and doors), metal pendants, PVA, primer, brushes.

To make a "house" you need:

1. Prepare and prime the glass, paint the areas under the window and the door with black acrylic.
2. Cut out foam bricks for walls, tiles, windows.
3. Stick the cut out parts on the bottle using PVA (when using the “Second”, the foam shrinks), leaving room for the door.
4. Install the door by gluing cut ice cream sticks to the surface (in this way, you can “install” a wooden fence by gluing sticks to foam bricks).
5. Paint the elements with acrylic, not forgetting about drawing the hinges on the door, handles.
6. Coat the bottle with varnish, rub the desired places with pigment and re-open the product with a fixative.

The same master class can help you make a bottle lock. Decorative elements and colors, in this case, should imitate a natural stone, which is used for laying real castles.

You can leave on the surface of the bottle areas that are not covered with a primer as "windows" through which you can "look" at the contents of the bottle.

How to decoupage bottles with leather

Leather can effectively decorate both an ordinary rectangular bottle and a “pot-bellied” jug (leather can create exquisite folds on round, large containers that are perfect for antique-style decor).

Decoupage with leather begins with standard preparation glass surface(cleaning, degreasing, priming). Then the surface is covered with leather, pre-impregnated with PVA, forming a relief with your fingers. When working with leather for the first time, it is better to cut the material into pieces and apply one by one: this method is quite simple, it will be more convenient for an inexperienced master. Working with a whole canvas is more difficult, but gives a cleaner and more accurate result. Upon completion of decoupage, the skin is tinted in the desired color, varnished.

How thinner skin, the easier it is to create a different relief on it.

How to decoupage a cognac bottle using rice paper towels

For cognac bottles, decor with rice napkins is perfect. To do this, we need a primer, a pigment to match the background of a napkin, a file, PVA, napkins, stamps or stickers, brushes, a fixative varnish.

To issue a bottle you need:

1. Prepare the surface (clean, degrease and coat with a primer).
2. Put a rice napkin on the file with the image inside, lightly moisten the napkin with water and place the image on the bottle.
3. Remove the file and cover with PVA napkin. In this way, completely decorate the bottle.
4. If necessary, add decorative elements (stamps, stickers, etc.).
5. Cover the product with scuba.
6. After drying, apply the pigment to the protruding parts of the bottle.
7. Cover the product with a fixative.

Such decoration is also suitable for small bar bottles, but for anniversary bottles of cognac, a more spectacular decoupage technique with an abundance of decorative elements is suitable.

"Lady in the Hat": decoupage of wine bottles

Wine is the favorite drink of women. Therefore, the design of a bottle of wine in the style of "Lady in a Hat" will be appropriate and outstanding.

The main element of this decor is a cap on the cork of the bottle, which is done as follows:

1. Cardboard is taken, from which the crowns of the hat and a circle with a hole for the cork of the desired diameter are cut.
2. Elements are glued and framed with satin ribbons different size. The tapes are applied to the surface smeared with glue.
3. The hat is optionally decorated with feathers with beads, roses, etc.

Depending on the style of the hat, the bottle itself is also made out. Most often, decoupage is performed using a fabric: a fabric pre-soaked in a PVA solution with water (proportion 1: 1) is laid out on the prepared surface of the bottle, while forming graceful folds. After drying, the fabric is covered with glue several times and dyed in the desired color. This design looks most impressive on a round bottle.

Unusual bottle decoupage: master class

Decoupage of a violin-shaped bottle can become original and unusual. The layout can be done as classical style (brown colors“under the tree”) or in country style (pastel background, roses on the surface of the “violin”, etc.).

One way or another, for such decoupage, it is necessary to have a primer, acrylic paint of several colors (for the background and drawing elements), thin and thick synthetic brushes, aqualak (matte for country music and glossy for classics), contours for modeling protrusions on the violin. If necessary - decorative elements (napkins, pegs, neck, etc.).

Decoupage is carried out according to the standard scheme: glass preparation, priming, applying the main background, decorative elements and fixing the effect with varnish.

This bottle will perfect gift for a girl, an original copy in your own hand-made collection.

Ideas for decoupage bottles

Depending on the type and purpose of the drink, you can use different kinds decoupage. So, wedding champagne can be decorated with photographs of the newlyweds, and New Year's bottle- decorate with semolina, blue or white sea salt. For lovers of the culture of the East and adherents of ornaments, dot decoupage is suitable, and for admirers of the classics - decoupage toilet paper and dark acrylic paint with marbled protrusions.

Decoupage ideas can be gleaned from needlework forums, groups in contact.

Bottles of vodka, due to the transparency of the liquid, are perfect for decorating “with a window” (tutorials on how to make such decoupage can be found on YouTube). A bottle of wine can be decorated with artificial grapes. Decoupage of beer bottles can be done in the "Beer shop" theme (millet with millet, illustrations of beer barrels, wooden mugs, etc.).

Decoupage in a pirate theme will be ideal for decorating a bottle of rum. It will be possible to decorate such a container sea ​​shells, coins, application on which a country or continent is depicted in the form of a map, compass, etc. The most effective will be the decoupage of a pot-bellied bottle using grout. Whiskey bottles can be decorated with red and green plaid textiles, Jack Daniels labels, illustrations for Conan Doyle's novels about a popular detective, pictures with bagpipes, the coat of arms of Scotland, etc. can act as applications.

The original bottle decoration can be bought in arts and crafts stores or online stores (such as, for example, "Crafts Fair").

Bottle decoupage master class (video)

Bottles decorated in decoupage style are creative and unusual gift birthday, anniversary, professional or international holiday both man and woman. Such a present the best way will be able to emphasize the solemnity and uniqueness of the event, because the decoupage of bottles has no framework and restrictions. The main thing here is the originality and originality of the idea!