New Year's crafts with their own hands balls of thread. Do-it-yourself Christmas balls from threads step by step with a photo
How to make a New Year's toy from threads and glue with your own hands? In fact, there is more than one master class that talks about this in detail and in detail. If you look at the photos and thematic videos presented in this material, it becomes clear that such crafts are not only easy to make, but in the end they turn out to be stylish and beautiful.
Probably the most popular option in this regard is a do-it-yourself ball of thread. How to make this Christmas decoration so that it turns out to be original, beautiful and just stylish?
DIY New Year's toys from threads
Shiny Ball #1
To work on this craft, you need balloons, PVA glue, as well as white thread, sparkles and water, a plate in order to pour glue into it. Glue must be diluted with a little water. If during the process the glue starts to run out, then add water to it. Decorate both the Christmas tree and the room.
Inflate the balloons to the size you want to end up with. The creation of this craft from threads begins with what you will need white thread tie to the tail of the inflated balloon and start wrapping the balloon with thread. Then dip this blank into a bowl of glue diluted with water.
Be sure to rotate the craft so that the glue soaks the threads on each side. Before the ball dries, additionally sprinkle liberally on each side with glitter. Hang the craft to the surface until completely dry. The New Year's toy will be completely ready after the ball is specially burst inside and pulled out of the blank.
Ball #2
In many ways, the first and second New Year's crafts are similar, but there are differences already in the final version. To work, you will also need balloons, as well as dense threads (in the first version of the craft, the threads could be ordinary), PVA glue, a glass for glue, a thick needle and scissors.
Inflate the balloon, getting the size you want to see as a result of your craft. Tie tightly so that the workpiece does not let air through. Now pierce a plastic cup with a needle into which a thread has already been threaded. Pour PVA glue into a glass, diluting it with a little water.
Pulling the thread through a glass of glue, wind it around the ball in a chaotic manner. When the whole ball is wrapped, leave a small tail and cut the thread. Leave to dry in a vertical position for a day. When the glue is completely dry, pierce the ball inside and get it out.
Advice! Additionally, this ball of threads can be decorated with snowflakes, sparkles, beads or beads, Christmas tree tinsel.
Gift packaging
The photo shows that Christmas decorations can be not only excellent products in themselves, but also an addition. For example, an item made in this way will be a great addition to gift wrapping.
To work, you will need a ball, a ball of thread, acrylic paint with a brush, glue. You will also need a screwdriver, scissors, a long piece satin ribbon. Traditionally, inflate the balloon and wrap it tightly with thread. Fix the thread with glue only in some places, so that in the end it does not move out. It is extremely important to wrap the ball so tightly that nothing can be seen through the threads. Then cover the threads with a thin layer of glue.
Apply to thread acrylic paint using a brush. Remember that the paint here not only gives color, it also additionally holds the threads together, so you should not feel sorry for it. Hang the balloon overnight to dry well. Then carefully pull it out of the cocoon yourself balloon. Next, cut the cocoon into two parts, make symmetrical holes on both sides with a screwdriver. Now put a gift inside, and then fasten the two parts of the ball, tie a beautiful satin bow around the circumference. How to do
The best toys are handmade. available materials, simple technique and an impressive result - all this is about toys made of threads. So, how to make a New Year's toy from threads and glue and home decorations: diagrams, options and tips.
On the eve of the New Year and Christmas holidays, I so want a fairy tale. Beautiful decorations on the Christmas tree, a festively decorated house will create good mood. The best jewelry and toys, these are those about which you can say that you made them yourself.
To create toys from threads, you will need a minimum of tools and skills. The technique and tools are the same in each case, but the results can be different.
Materials and tools for creating toys
For work you will need:
- scissors
- PVA glue or wallpaper glue (diluted with water)
- threads of different thicknesses
- stationery knife
- oilcloth (for bedding)
- balloons (round and long)
You will also need a little patience in order to wait for the blanks to dry completely.
Below are different models thread toys, and they are all based on the same technique.
Execution technique
The principle of creating voluminous toys from threads and glue is very simple:
- Inflate the balloon to the desired size
- Wrap it with a thread dipped in glue
- Waiting for complete drying
- Pierce the ball and carefully remove it from the workpiece
Practice shows that it is much more efficient to wrap the ball with a thread dipped in glue. If glue is applied to a workpiece wrapped with thread, it gets into free areas, spreads over the ball, and does not completely impregnate the threads. As a result, the workpiece is very sloppy.
It is much easier to pierce a tube of PVA with a needle and thread and pull the thread from the other side. The thread will be evenly covered with glue in the process of winding on the workpiece.
The more thread goes to the workpiece, the longer it will dry and the denser the workpiece will turn out. Let the blanks dry during the day. After drying, pierce and remove the ball from the workpiece.
Now you can proceed directly to creativity.
Christmas balls
You can use multi-colored threads. After drying, decorate the balls with sparkles, stick stars or snowflakes. Attach the loop.
Snowflakes
draw simple snowflake on paper and put a transparent oilcloth on it. Lay out the snowflake along the contour with glued thread and sprinkle with sparkles. After drying, tie a ribbon for fastening.
Garland
Balls of thread and glue will turn an ordinary electric garland into an art object. You can fasten several balls of different sizes with fishing line and you will get a garland for a Christmas tree or a chandelier decoration.
Balls hung in a group at different heights look good.
Volumetric heart
Tie two balls with tails and wrap them together so that you get a heart shape. After drying, decorate the airy heart with artificial flowers and ribbons or stars.
wreath on the door
An original heart-shaped door wreath will be made from two long balloons. Make two parts separately: wrap the ball with thread and fix it in a bent state. After drying, carefully cut off the edges and connect the parts together with a glued thread.
In the same way, you can make an original door wreath from threads: fix long inflatable balls in the shape of a semicircle and connect after drying. Decorate it with toys and red ribbons.
In addition to toys, you can make a snowman in this way, a vase for small things, assemble a Christmas tree from balls of different sizes and make a ceiling lamp.
If you know how to crochet, then you have the opportunity to create beautiful patterned toys and shades. The technique is the same, the difference is only in one thing: a knitted napkin soaked in glue is applied to the form (blank).
Combining threads with each other different color you succeed original toys and decorative items for the home. If the dried product is covered with a transparent acrylic varnish, then it will delight and inspire you for a long time to come. There are many options on how to make a New Year's toy out of thread and glue, anyone can do it, so involve all your family and friends in the work.
Do you love needlework? Then you will love making DIY Christmas decorations! This is a pleasant and exciting activity for the whole family that will not leave anyone indifferent - you will spend several evenings with pleasure making toys for the Christmas tree with your own hands.
What do we use for the material
What do you need to make DIY Christmas decorations? You can use almost anything that comes your way. If you want, you can buy special consumables (sold in art stores), or you can use what is in any home. So what to prepare:- plain paper (suitable for making patterns);
- pencils and markers;
- ordinary, white and colored cardboard (velvet can be used);
- sharp scissors and a dummy knife;
- glue (PVA or glue gun with rods);
- threads and needles;
- yarn of different shades;
- various decorative materials - it can be sparkles, sequins, confetti, multi-colored foil, stickers and much more.
Simple crafts from improvised materials
Of course, you have probably seen how Christmas balls are made from threads and glue with your own hands, but why not expand the range? We make different Christmas decorations with your own hands.From yarn
This is a simple and at the same time spectacular Christmas decoration that can decorate any Christmas tree.
For manufacturing you will need:
- yarn;
- tailor's pins;
- plate or bowl;
- porous material (for example, a disposable tray);
- cutting paper;
- marker.
The template needs to be attached with pins (or ordinary toothpicks) to the porous material, and lay out the pattern you need on top - first the contour is laid out, then the interior decor. Do not cross the threads too often, the toy should be fairly flat. After you are done, dry the product and remove it from the pins, and tie a loop in the eye. If desired, you can decorate with sparkles or rain.
From wire
How to make Christmas toys with your own hands in just a couple of minutes? Use wire!
To make toys you will need:
- two types of wire - thick and thin (thin can be replaced with bright threads, for example, floss. Pure white strong threads look very nice);
- beads, beads;
- colored tape;
- pliers.
The ends of the thick wire must be twisted. You need to string beads and beads mixed on a thin wire, tie the end of a thin wire to a future Christmas tree decoration, and wrap it randomly.
When the toy is evenly wrapped, you need to wrap the free tail of the wire around the toy, and tie a ribbon in the shape of a bow - your toy is ready.
Another original idea:
Ribbon and beads
Who said that do-it-yourself New Year's toys must be done for a long time and painstakingly? Not at all. Literally in five minutes you can, which will decorate and Christmas tree, and the interior.
You will need:
- beads;
- narrow tape;
- yellow, gold or silver cardboard;
- glue "Second";
- needle with thread.
The interior decor made in this way looks very attractive.
From cardboard - in a couple of minutes
Some Christmas toys made of paper or cardboard take a lot of time to make, but not in this case - here you really need a couple of minutes to make an elegant hand-made Christmas decoration.So, you will need:
- ordinary cardboard;
- some twine or thick yarn;
- glue;
- paints and brushes;
- napkin or cloth;
- varied decor.
With a free tail of twine we wrap the Christmas tree in different directions. After some pattern of threads appears on the Christmas tree, you can start gluing it with a napkin. You can tear the napkin into pieces, coat the Christmas tree well with glue, and glue it tightly with a napkin. This will give a nice texture. future toy.
After the toy has dried, you can start painting - paint the Christmas tree in green color.
After the paint layer dries, shade the texture of the toy with a dry hard brush and white paint, and then decorate as you like.
From bright patches
Here you will need sewing machine, but with a special desire, you can cope without it. This The best way make Christmas toys from cotton wool and fabric - just choose a fabric with a Christmas ornament, or use the one you have on hand.
Prepare some paper patterns - for example, deer, stars, gingerbread men, cubs, letters and hearts. Cut the blanks out of the fabric with your own hands, sew them in pairs, leaving a small gap (for stuffing), and through this small hole, tightly stuff the toys with cotton wool or padding polyester. It is most convenient to fill with a pencil.
Patterns can be downloaded here:
By the way, do not forget - we sew on a typewriter from the inside, but if you decide to make toys made of dense fabric with the kids, then it’s better to sew them with a decorative seam over the edge - a do-it-yourself toy will look simply charming and suitable even for a home Christmas tree, even for kindergarten- usually for kindergarten trees, children make decorations themselves.
From twine and cardboard
New Year's toys made of paper and cardboard will be much more interesting if you add a couple more simple materials to them. To make such a toy, you will need ordinary cardboard, simple paper or natural twine, a little felt or any other fabric, as well as plain paper, a pencil and a ruler, a drop of glue.
The star pattern can be downloaded here:
First, make a pattern on plain paper, and then transfer it to cardboard. Do not forget that the star must be double. Do not make the star too thin, it is better to make it from a centimeter or more. The tail of the twine is glued to the cardboard, then you need to gradually wrap the entire workpiece.
Lay the thread as tightly as possible so that there are no gaps. In order to decorate the star, make a couple of leaves and berries out of fabric and decorate one of the rays. Your decoration is ready.
From yarn and cardboard
Do you want to make original and at the same time charming Christmas decorations with your own hands? Then it's time to make small gift hats with your own hands from improvised materials. It's wonderful new year gift which looks cute and will keep you warm all winter!
To make Christmas tree decorations in the form of hats, you will need:
- a couple of bushings from toilet paper(you can just glue cardboard rings);
- remnants of colored yarn;
- beads and sequins for decoration.
The threads need to be cut into segments of approximately 20-22 centimeters. We fold each piece in half, draw the loop through the cardboard ring, and stretch the free edges of the threads through the loop. It is necessary that the thread is firmly fixed on the cardboard base. So you need to repeat until the cardboard base is hidden under the threads.
All thread tails need to be pulled through the ring so that our hat has a “lapel”.
And now we drag the free ponytails tightly with a thread and cut them in the shape of a pompom - the hat is ready! It remains only to make a loop and decorate your Christmas tree toy with sequins and sparkles.
From beads
Making a New Year's toy in the style of minimalism is easy and simple - you will need wire, beads and beads, a ribbon and a coin (you can replace it with a small candy, but it looks much more spectacular with a coin). Try to make this Christmas tree toy with your own hands, a very simple master class.
Make a loop on the wire and string green beads mixed with large beads on it - they will play the role of New Year's balls on our Christmas tree. After the wire is filled, give it the shape of a Christmas tree, folding in a spiral.
Once your tree is in shape, fold the loose end into a loop.
We cut off a piece of ribbon, form a loop for hanging from it and stretch it through the Christmas tree, and decorate the free tail with a coin (the easiest way is to stick it on double-sided tape). We tie a decorative bow on the loop for hanging - your decor is ready!
Christmas balls
How to make a Christmas ball of thread? As easy as shelling pears, watch our master class about spectacular lace balls on the Christmas tree.Required:
- several balloons;
- cotton threads;
- PVA, water and sugar;
- scissors;
- polymer glue;
- spray paint;
- decor.
First you need to inflate the balloon - not completely, but according to the size of the future decoration. Mix two tablespoons of water, two teaspoons of sugar and PVA glue (50 ml), and soak the thread in this mixture so that the thread is saturated. Then you need to wrap the ball with a thread randomly. The balls need to be dried for several hours. After the glue is completely dry, you need to blow off the ball and take it out, and gently paint the thread ball with spray paint and decorate with sequins and sparkles.
Do-it-yourself thread Christmas balls will turn out to be very, very spectacular if you make them in different tones - for example, red, silver and gold. Try to make your own Christmas balls in different technique- you can sew or knit balls, make them from cotton wool with your own hands or, for example, sew them from felt - there are never too many such toys.
From paper
Christmas decorations made of paper enjoy big love both big and small fans New Year's miracle- try to make paper Christmas balls with your own hands.
Do-it-yourself New Year's paper toy is done like this: 
Decorating such a toy is not additionally required, it is already expressive.
Another version of the ball:
Or you can make such a ball according to the master class:
From felt
Do-it-yourself Christmas toys made of felt look very warm and cozy, and making them is very, very simple. To make your own charming Christmas toys made of felt, you will need:- red, white and green felt;
- threads of red, white and green;
- glue Crystal;
- scissors and needles;
- cardboard;
- some satin ribbon;
- soft filler (cotton wool, holofiber, synthetic winterizer).
First make sketches for your future toys. It can be anything. After the patterns are ready, transfer them to the felt and cut them out. What is good about this material is that it does not crumble, you will not need to additionally process the edge of each workpiece.
Make the same decorative elements - for example, holly branches (by the way, did you know that this is a symbol of joy and Christmas reconciliation?). Berries need to be glued to the leaf with glue, and then make a decorative knot - this will add volume to the berries.
We sew each blank in pairs. By the way, it is best to sew with contrasting threads, it will be fun and elegant. And how to make Christmas decorations voluminous? Stuff them with holofiber before sewing them up completely! Spread the product well, so the Christmas tree toy will be stuffed more evenly. For stuffing, you can use the back of the pencil.
Sew on decorative elements, and your christmas toy ready!
Try sewing felt decorations not only for the Christmas tree, but also for the home - for example, a Christmas wreath decorated with felt toys looks very stylish. Look at a selection of DIY Christmas decorations photo workshops - and you will understand how much interesting things can be done from ordinary felt of two or three colors.
Master class how to do Christmas garland do it yourself from felt:
Below you can download templates and patterns different Christmas trees for crafts from felt.
Hollow balls of thread look unusual and very beautiful. Today we will tell you how to make them and offer some ideas for making Christmas accessories using this decoration.
Balls of thread can be used as an independent decoration for the Christmas tree, turn them into a sparkling garland, build a New Year's character from them, and much more. So arm yourself with threads, and then your imagination will do everything for you.
What will we need?
- threads of any color and thickness (fluffy should not be taken)
- Balloons
- PVA glue
- starch
Progress
Earlier we told you how to make a lampshade from threads. The technique for making these balls will be similar.
The main difference is that you do not need to inflate the balloons too much. Make them very small - the size of a fist. Inflate as many balloons as you need. And tie them somewhere so that it is convenient to wrap and dry the future craft.
In a bowl, mix one and a half cups of glue with a half cup of starch and a quarter cup of water. We dip the thread into a bowl and wind it around the ball in random order.
You can pre-lubricate the balloon with Vaseline to make it easier to separate it from the thread. However, you can do without it.
When the glue dries and the threads harden, you just need to pierce the ball with a needle and carefully pull it out through the hole.
Make as many balloons as you need to make the desired accessories. You can use them in different ways.
Balls of thread for the Christmas tree
This area of application is the most obvious, but no less significant.
Just attach the loops to your balls and decorate the Christmas tree with them. Additionally, various beads can be strung during winding. Before drying, the balls can be generously sprinkled with dry sparkles.
The thinner the threads, the prettier decoration. Regular sewing thread will work too.
Christmas tree from balls
We have already told you what beautiful compositions can be made from various Christmas balls. In any of the techniques described, you can use not only standard ready-made balls, but also homemade balls of thread and glue. For example, you can collect a Christmas tree from them. If not all, then at least part of it.
When making such Christmas decorations, it is better to use balls made from thicker threads - they are stronger.
New Year's interior decoration
Despite the obvious simplicity of the idea, the effect is simply amazing!
Make several balls of different sizes and simply place them on the windowsill. Scatter between them pieces of tinsel, various stars, gold ribbons. Place a few simple candles nearby (in this case, take precautions) or arrange a garland (less fire hazard, but still be careful). Turn off the lights and turn on the lights - the house will be filled with magic!
balloon snowman
And even your favorite New Year's character in this technique turns out to be somehow especially beautiful.
Fasten the balls with glue, and the hands need to be done separately. To do this, we need a thin wire and red threads. Fold the wire in the form of mittens, coat them with glue and wrap them tightly with thread.
Finished snowmen can be decorated knitted hats, beads and other accessories.
Garland with balls of thread
One of the most beautiful accessories that can be made from these balloons.
Just be sure to check the garland for serviceability. In addition, it must be of high quality, and best of all - with additional protection against heating. Be careful not to overheat the bulbs. If you doubt that your garland meets all safety requirements, it is better to refuse this idea.
To make a similar garland with your own hands, you just need to push the threads a little, put the light bulb in and move the threads back. The main thing is that the light bulb does not come into contact with the threads.
Such a garland looks very beautiful on the Christmas tree, and on the wall, and on the windowsill.
Hanging decoration
Balls of thread can simply be hung from the ceiling.
If you don't feel like putting in the extra effort, just hang all your balloons over a table or door. It looks very unusual and impressive, adds comfort to the house.
Choose any of the proposed ideas or come up with something of your own. This Christmas decoration can be used in dozens of different accessories. And each will be beautiful in its own way.
Views: 3 489
New Year's Eve is just around the corner. We are faced with the task of decorating our home as original and unusual as possible. We resort in this matter to the garlands familiar to all, Christmas decorations, all kinds of decorative pendants, shop figurines of fairy-tale characters - Santa Clauses, Snow Maidens, Snowmen and more. However, from year to year all this, to be honest, is pretty boring, and I want to somehow diversify christmas decor. For this, it is worth doing needlework, thanks to which you will be able to turn your home into fairy tale. We bring to your attention our article in which we will present you 6 photo ideas interesting crafts from thread and glue New Year 2019 DIY made very quickly and quite simply. You should not immediately abandon our excellent idea if you have never done anything like this, because our master classes will convey to you a sufficient amount of available information necessary for the work of beginners and professionals too.
Ball of thread and glue
For the New Year 2019, you can find many ideas for making balloons. Even from simple threads and glue it turns out lovely decoration interior, created by hand in a fairly short time. The lesson is not time-consuming, so everyone without exception can do it - not only children, but also adults. In addition, the presented master class will really appeal to novice art masters. Thanks to the available information, the most beautiful crafts for New Year's Eve can be born.
This will require:
- threads;
- glue;
- balloon.
Progress:
- First you need to inflate the balloon to the desired size.
- Then it is covered with threads in random order, which must be fixed with glue.
- When everything is ready, the ball is pierced with a needle and descends. You can pull it out carefully through a small hole or use it as a rope.
- The created ball can be decorated with tinsel or left as is. Even just hanging on a string, this craft will decorate any room for the New Year 2019.
Watch our video to better understand this creative work.
Master class: making a ball with your own hands
Snowflake
Do you want to holiday decorations made by your children, then you can do simple craft from threads and glue for the New Year 2019 with their own hands, even for the youngest masters. It can be in the form of a snowflake. All you need is support and maybe a little help. If you gradually perform the work according to the master class proposed by us, you will get a beautiful decorative little thing. It can be hung on a Christmas tree or on a window. In any place, such a creation will look very beautiful.
This will require:
- Threads;
- Glue;
- Oilcloth;
- Pen;
- pins;
- Scissors.
Progress:
- On an oilcloth it is necessary to draw a snowflake of any shape.
- Then, on the workpiece, you need to fix the threads pre-moistened with PVA glue, strictly along the lines with the help of pins or needles.
- When the work is dry, you can remove the pins.
- After that, you need to carefully remove the oilcloth. The snowflake is ready to decorate the house for the New Year 2019. If you make it from terry threads, then it turns out to be fluffy. For children, such a New Year's activity will be very interesting.
Watch our video tutorial and learn how to create a fun glue and glitter craft.
Master class on manufacturing new year snowflake do it yourself
Feather for Christmas decor
By the New Year 2019, you will need to make with your own hands not only decorations for your own home, but also gifts. You can make wonderful gifts for family and friends on your own. To create a beautiful Feather craft, you need simple materials in the form of threads and glue, as well as a little time. Any person who appreciates beauty will be happy with such a souvenir.
This will require:
- Threads;
- Glue;
- Wire;
- Scissors.
Progress:
- For this process, it is better to use floss threads. First you need to make a feather. To do this, the wire is first wrapped with thread material, and then it should be strung on a sharp base - a rod to create a magnificent effect.
- After that, the edges must be cut with scissors to get a product that looks like a real feather.
- The next step will be the process of dipping the finished product in glue, after which you need to give time to fix it. You just need to place it on a flat surface and, preferably, oilcloth, so that it does not stick.
- After drying, you can trim the shape. The finished pen must be glued onto a cardboard base. You will get a beautiful craft for the New Year 2019. If you use the lesson for kindergarten, then each child will be able to give this wonderful product to his mother.
Our video will tell you in more detail and more clearly how to make a pen at home.
Master Class: New Year's craft do it yourself
Christmas tree made of thread and glue
Everyone knows that a beautifully decorated Christmas tree is an uncancelled symbol of the New Year and Christmas holidays. Therefore, you should certainly make such a charming craft from threads and glue for the New Year 2019 with your own hands at home. And it doesn’t matter at all whether you have a living specimen of a forest coniferous beauty. Such cute decorations are breathtaking and uplifting if you arrange them in your home on shelves, tables, chests of drawers or anywhere else. The main thing is to have a lot of them in all rooms. To create an unusual product, you can use thread material of any kind, but yarn is best.
This will require:
- Threads;
- Glue;
- scissors;
- simple pencil;
- paper;
- decor elements: sequins, beads, pasta or cereals.
Progress:
- You need to draw a Christmas tree on paper or print it out. Along its contour, you need to lay a thread soaked in glue. It is best to use knitted ones, all this must be done very carefully so that the craft turns out beautiful and neat. Then the product must dry.
- After that, the dried surface must be treated with a shiny varnish and again left to dry. Then you need to cut out the picture and hang it on the Christmas tree. A beautiful shiny decoration for the New Year 2019 is ready! Similarly, you can arrange any other image. The instruction is elementary and suitable for self-production by preschool children.
Master class on creation volumetric Christmas tree do it yourself
A vase for flowers
For the New Year 2019 in such a vase, created by hand from simple material- thread and glue, you can put Christmas tree branches or fresh flowers. Beautiful craft looks just great.
This will require:
- Threads;
- Glue;
- Plastic container.
Progress:
- To get a long vase, you need to use a regular bottle, in which the top needs to be cut off.
- Then you need to glue knitted threads to it, placing them in any pattern. The standard ornament is vertically arranged lines. At the top, to decorate the craft, you can attach a ribbon to cover the bumps. You can use such a creation for both fresh flowers and artificial ones. And for the New Year 2019, you can place a creative festive ekibana in it, which will transform your table or any room.
Master class: an original vase made of threads and glue with your own hands
Cheerful snowman made of threads and glue
Among the interesting and very simple DIY crafts for the New Year 2019, there may be a snowman. It is also made from thread and PVA glue quite easily. However, it will still take some time to create a beautiful and neat product. In general, the whole family should participate in this creative process, from adults to children, who will be pleased to feel like your irreplaceable helpers. So let's get down to the fun stuff.
For work you will need:
- balls - 5 pcs.;
- white yarn;
- stationery glue or PVA;
- ready-made eyes or buttons;
- thin threads and a needle;
- a sheet of paper, can be orange (for the spout);
- a small piece of red felt or other fabric (for the mouth);
- scissors.
Manufacturing process:
- To create the body of a snowman, we need to inflate the balls, and each of them must differ in size from each other. In this way, we prepared the head, the middle of the body and the lower part of the snowman. Do not forget about the hands. They can be created using the same balls, but of the appropriate size, and if there is no such desire, then it would not be bad to build them from paper, sew them from fabric and some kind of filler. The choice, of course, is yours, dear friends.
- The white yarn of your choice should be pre-soaked in PVA glue or clerical glue for several minutes so that the required length of thread is thoroughly saturated with this fastening solution.
- Our next step is to wind the yarn we prepared earlier. This should be done so that the ball is completely covered with thread material, as in the photo.
- After you process all the balls, they need to be given time to dry. And after the allotted time, with a needle, you need to pierce all the balls so that only the frame of yarn remains. Carefully remove their remains through the gap.
- Now we need to connect together all the round frames we have prepared to make the body of a snowman. They will need to be sewn with a needle and thin light threads. So, we have formed a very cute fairy-tale character, consisting of three rounded parts of the body and arms.
- To give the image of a snowman expressiveness, we need to pay attention to his face. To do this, we glue ready-made eyes or black buttons to the appropriate places; the mouth, cut out of red felt or any other fabric, is attached in the form of a perky smile, also with glue.
- Let's start creating a nose - carrots. For this purpose, we need a sheet of colored or snow-white paper, A4 format. We need to roll it into a tight cone like a carrot, then fasten it with adhesive tape.
- When the base of the spout is ready, we should take the orange-colored threads and also moisten them first in the adhesive solution. Then we wrap it thickly on a paper frame so that we get a bright and even shade, preferably without large gaps. We give time to dry. After a certain period, we should pull the paper out of the thread cover very carefully.
- Frame - we sew a carrot to the face of a snowman.
- Cheeks can be expressed by slightly tinting them with blush, using a makeup brush.
- On the head of a snowman, you can put on a scarf, a hat that fits the size, or something else, at your discretion. As the main outfit, you should use a scarf.
- Build a broom out of twigs and stick it in your hand.
like this in a simple way you can make a wonderful craft from threads and glue for the New Year 2019 with your own hands at home. Your family will find this activity quite amusing. If you want to somehow diversify your entire home, then create a lot of colored balls using this technique and hang them in the form of garlands on windows, pendants on chandeliers, Christmas wreaths on doors. Watch our video tutorial to do everything right and quickly.
